Find a Conservatory Installer you can trust in Caithness.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

There are several reasons why an aluminium conservatory installation is a great way to expand your home.

Firstly, it’s strong and durable. This means that as well as providing you with a conservatory that’s more secure, this frame material will also last longer and cope with harsher weathering that wooden or uPVC conservatories.

Aluminium also offers more design possibilities. It can be bent into custom shapes, making it ideal if you want to create a unique, stylish home extension. It comes in a wide range of colours, so you can coordinate it with your existing property.

An aluminium conservatory installation can also help you maximise light in your home. They have very thin frames compared to wood and uPVC, so they’re a great choice if you want to let in as much daylight as possible.

If you’re worried about your conservatory being too hot in the summer and too cold in the winter, you can insulate it. Older conservatory roofs are made from inefficient polycarbonate, which means that up to 25% of all the heat lost in a conservatory escapes from the roof.

To insulate your conservatory roof, you can install blinds or curtains – but they can go mouldy from condensation. There are two other options that are more long-term that could be better: upgrading the polycarbonate in the roof or opting for a solid conservatory roof.

You can add a thicker polycarbonate roof panel with better thermal efficiency if the glazing bars on your conservatory will expand to fit. This will offer better insulation, but may not last very long – maybe less than 10 years.

A solid conservatory roof is a new way of making your conservatory usable all year round. Most existing conservatory frames will be able to support a lightweight metal structure and slate-like tiles to match your home’s roof. Or you can opt for a hybrid option where the solid and glass parts are merged together. This will insulate your conservatory roof so it never gets too hot or too cold.

How To Build A Conservatory

Conservatories are a perfect means of creating an extra living space within your home. They can serve various purposes which includes serving as an avenue to entertain guests, a playroom for the kids and can even be used as a home office, they’re able to open up your property without having to break the bank for the highly expensive renovations. So if you wish have a conservatory constructed in your home, it’s either you do it yourself or hire a professional. Doing it yourself will help you save some money but can also end up disastrous. So if you lack the confidence to undertake this project by yourself, then it’s strongly recommended that you hire a professional who can guarantee the best results. In this guide, you’ll discover all steps required to build your own conservatory.

✓ The Base. Due to its durability and cost, concrete happens to be the most used material for conservatory’s base. Firstly, measure the enough area to accommodate the conservatory. Dig at least 1 metre deep and ensure it’s level. Fill with damp membrane and pour your concrete mixture in evenly till it reaches level ground. Once done, make sure that the base is totally dry before erecting the conservatory

✓ Building. Basically you can start by constructing the walls and ensure that they’re sturdy and secure, putting into consideration their measurement.

✓ Roofing. Good news here is, DIY conservatories will already come with the roofing in place, so you won’t have to bother about this stage when building. They usually come with an acrylic roof which is easy to install and maintain.

✓ Flooring & Finishings. Starting from the roof, ensure that there’s sealant on all areas where air can pass through. For the flooring, you’ll have to choose your patio slabs or tiles to go outside of the structure. You can apply these with a thin layer of concrete or onto screed flooring.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

If you don’t want to go down the route of changing the roof on your conservatory, you can make your conservatory warm by adding curtains or blinds. Blinds are the best option since you’ll be able to fit them to your conservatory roof as well as the windows. There are plenty of options available, from Roman to Venetian blinds, and you can install them yourself if you’re feeling confident. Otherwise, there are plenty of blinds installers that will be able to fit them for you.

When it comes to boosting the value of a property, there are a bunch of home improvements one can make to increase a property’s value. One of these improvements that can add to both the value as well as saleability of a home is a lean to conservatory. So exactly how much value does a conservatory add?

According to several studies carried out, a lean to conservatory should add anything within the range of 7% to 15% of the average property value in the UK. This equals thousands of pounds which ultimately translates that home and property owners can recoup some or even all of their cost of investment in the extension with relative ease. However, in order to determine the exact value added, you’d have to calculate the value of your investment. These includes determining the amount of money the lean to conservatory will cost including installation, the current value of your property as well as the amount of value the conservatory will add to your property. Doing this will help you determine how wise the investment in a lean to conservatory will be.

At present, the average price in the UK stands at about £240,000 and according to the experts, lean to conservatory should add with the range of 7 percent or 10 percent of that price in terms of value. In other words, the value of your property can rise by close to £17000. And if the total cost of building the lean to conservatory is about £9000, that means you’ve made a profit of up to £8,000. Besides this, there are also some other significant values and benefits offered by installing a lean to conservatory which includes more living space, aesthetic appeal and many more.

How Much To Change Roof On Conservatory?

If your existing conservatory roof is looking a bit tired and worn out, it may just be time you stopped the frequent repairs and maintenance, and start to think about getting a replacement. However, before you change the roof on your conservatory, there’s always a need to find out the cost to complete the project before you proceed so as to help you set a budget and start to plan. In this article, we’re going to give you a rough estimate of the cost of a changing a conservatory roof. Let’s take a look!

Generally, the prices of conservatory roofs varies largely on the a number of factors which includes the material used as well as the size of the conservatory.

✓ Polycarbonate conservatory roof - if you’re looking for the most affordable conservatory roof material option, then this is your material. Polycarbonate is very easy to work on and needs just a little framing skill which makes labour quite cheap. Furthermore, each panels are also relatively inexpensive when compared to glass panel or tile area. The price of this material will normally range between £200 to £300 per square metre for installation.

✓ Glass conservatory roof. This material is very energy efficient and will also add great value to your home. The price of this conservatory roof material will usually range between £300 to £360 per square metre for installation.

✓ Solid conservatory roof. This conservatory roof material possesses the best insulation properties alongside the longest lifespan. The solid tile roof the most secure which also offers the most privacy alongside many other benefits. These benefits, however, can only imply a higher cost. For a solid conservatory roof, the price per metre square normally varies between £445 to £650.