Find a Conservatory Installer you can trust in Chalfont St Giles.

When it comes to extending your home or creating more living space, you can either construct an extension, transform a current space or add a conservatory. While all the three available options to create more living space in your home are worth giving a shot, the wooden conservatory happens to be the easiest and cheapest of them all. If you are thinking about building wooden conservatory of your own, then you’d probably want to know exactly how much its going to cost. The simple answer is that it depends on multiple factors such as the type of wood required, the size, style as well as the quality of materials to be incorporated in your final conservatory design.

The most significant determinant, however, is the type of wood required. Below is a breakdown of the prices based on this factor:

• Hardwood Conservatory

Hardwood such as elm and beech are one of best options for building conservatories due to their complex structure which helps increase the durability and stability of conservatories. The price of an average hardwood conservatory without fitting usually ranges £10,000 to £15,000.

• Oak Conservatory

Due to its popularity and high availability, oak is a very common wood type used in the construction of conservatories. And as a result, it can be gotten within a range of £9,000 to £10,000 for just the wood. Oak can also be made to be resistant to bugs and pests. The price of this type of oak wooden conservatory jumps to around £15,000 to £20,000.

• Timber Conservatory

This refers to various types of wood that’s readily available before being subjected to treatment in different plants or factories. Due to its rather rough exterior and lack of a clean finish, this type of wood is usually gotten at a giveaway price. Depending on the type of wood, the price to buy just a timber conservatory kit can vary between £10,000 to £20,000.

Click here to learn more about wooden conservatories

Orangeries are being built by thousands in the country year in year out and for good reasons. Not only do they provide a cost effective alternative to moving home and boosting your property’s value, but can also be used all year round. If you’re looking for a room for all seasons, then you simply would not want to overlook building an orangery. They can be quite cosy in the winter months protecting you from the wind and rain, and keeping you warm, while you can throw the doors and windows to enjoy the sunshine during the summer months.

Orangeries can be used all year long as they’re made mostly of components which makes them stay warm all through the year, which is unlike conservatories that’s almost wholly made of glass meaning they are not suitable to be used during the colder months. This implies that orangeries can be used for almost any purpose throughout the year regardless of the time of year it is. What’s more? With a plethora of style and options of orangeries you can choose from, there’s hardly any space you can’t fit an orangery, be it small or large. In recent times, more and more homeowners are now using their orangeries for a variety of purposes such as game rooms, chill out area, lounges as well as dining rooms. They have this special ability to create a seamless transition from your home to your garden while also allowing you to alter the room’s layout all year round depending on your needs at the time.

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

Getting its name from it’s original use and commonly mistaken for conservatories, orangeries were developed about four hundred years ago to help protect citrus fruits from the winter frosts. An orangery is basically a room extension featuring a flat perimeter roof, brick base as well as a central roof lantern including doors and windows. Even though it originates from Italy and made more modern by Holland’s architectural development, orangeries have grown to become an ubiquitous phenomenon within the British society with thousands of the extension being built every year. They’re built in a similar way to conservatories, however, orangeries are typically developed from a brick base and usually making use of a stone or brick pillars to provide support to a flat roof perimeter. Also, the common choice for an orangery is a central roof lantern including glass panels or vent windows. Unlike conservatories which usually make use of patio doors, orangeries are more likely to have more complex bi-folding door system - enhancing the visual appeal of the extension in a more unique and stylish way.

Orangeries typically incorporates less glass when compared to a conservatory - thereby, allowing a moderate amount of natural light into the space. This way, you would not have to go outdoors to enjoy the sunlight during the summer months. Generally, the extension also offers a atrium-style ceiling height while also protecting your space from excessive sunlight and adding character to your home.

In conclusion, orangeries are an excellent choice when it comes to extending your home - be it to make a room larger or adding a new room all together. Ultimately, they go a long way to add incredible value to your home for resale purposes. Orangeries are best installed by seasoned professionals in order to ensure the best outcome.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

The main features of a lean to conservatory is a flat angled roof which is backward sloping. This type of conservatory is best added to houses which do not have height or possesses only a small space. If you’re looking to install a lean to conservatory in your home or property, one of the first things you’d have to consider is the cost of getting it done so you can set a budget and start planning. In this article, we’ll give you an idea of how much a lean to conservatory price is, so you can have a rough estimate for your conservatory requirements.

Generally, the average cost of conservatory can be within the range of £5000 to £20000 and of course this depends on both the design and home. There are a number of influencing factors that can play a key role when it comes to determining how much you’ll be paying for your conservatory. Some of these factors include the size, style, material, colour as well as the roof type. All of these factors can greatly determine the overall price of your lean to conservatory, so you’d most likely have to approach the acquisition process as a multi-staged concept so as to get the perfect fit for your home in every level.

So with these factors in mind, a lean to conservatory style with a polycarbonate roof material will range between £8100 to £11900. A lean to conservatory style with a glass roof material will range between £9000 to £13200. Overall, the lean to style prices usually ranges from £3900 to £20000 depending on the size of the structure.