Bathroom | Fitting
Burntwood - WS7
Enquiry from: Trevor D
Start Date: Immediate
I want my bath taken out and walk in shower fitted in
-->
Over 1 reviews & an average rating of 5/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Bathroom Fitters near you
Burntwood - WS7
Enquiry from: Trevor D
Start Date: Immediate
I want my bath taken out and walk in shower fitted in
Burntwood - WS7
Enquiry from: Edward S
Start Date: Immediate
New bathroom fitting with removal of old tiles and suite. We need toilet bath and sink installed considering underfloor heating. Replaster and tiling.
Burntwood - WS7
Enquiry from: Tina S
Start Date: Immediate
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: House, Bathroom floor area: 10 x10, Work description: Free standing bath and shower cubicle to be fitted and...
Burntwood - WS7
Enquiry from: Helen L
Start Date: Immediate
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: House, Bathroom floor area: Not sure , Work description: Take out a corner bath and replace with a p shaped ...
Burntwood - WS7
Enquiry from: Helen L
Start Date: Immediate
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: House, Bathroom floor area: Unsure, Work description: Taking out a corner bath and replacing with a shower b...
Burntwood - WS7
Enquiry from: Kenneth S
Start Date: Less than one month
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: House, Bathroom floor area: 35, Work description: remove old bath @ vanity unit replace with new. Water serv...
Burntwood - WS7
Enquiry from: Stephen T
Start Date: Immediate
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: House, Bathroom floor area: 64, Work description: New bathroom removing the bath and replacing with walk in ...
Burntwood - WS7
Enquiry from: B R
Start Date: Immediate
Customer visited the mybathroomprices.co.uk site and submitted an enquiry. Property type: Flat, apartment, Bathroom floor area: 50, Work description: Strip out en-suite and re-fit new shower tray, e...
Burntwood - WS7
Enquiry from: H L
Start Date: Immediate
Refit new bathroom toilet sink bath plumbing staying in same place Are you the property owner: Owner of the property Property Type: Semi detached Do you have all the materials required: No Inter...
Burntwood - WS7
Enquiry from: H L
Start Date: Immediate
Refit new bathroom toilet sink bath plumbing staying in same place Are you the property owner: Owner of the property Property Type: Semi detached Do you have all the materials required: No Inter...
How much do Bathroom Fitters cost? Costs for Bathroom Fitters in 2024 can differ relying on the type of job that you want to have carried out in your house. It's the question we get asked a whole lot "how much do Bathroom Fitters cost?".
If you’re about to fit a new bathroom in your home, then you’d probably be wondering how much would be the labour cost of getting it done. Unfortunately, a single accurate answer can’t be provided to this question as there are many influencing factors that can determine the labour cost to fit a new bathroom. In this guide, we’ll give you a good insight on bathroom fitters charge to help you make informed decisions.
While you can obtain a good evaluation when planning the work on your bathroom, the final cost can largely vary. For small jobs such as fitting a pedestal basin with taps, professional installers can charge within the range of £170 to £250. Meanwhile, bigger projects such as tiling an entire bathroom can cost an average fee of about £70 to £90 per square metre. Generally, the overall average cost of fitting a new bathroom is about £6,500 in the UK. But in an event whereby you’ll be switching to a bathroom suite that’s exactly like the old one which wouldn’t require extra flooring as well as tiling, there’s a high chance you may be able to complete the project for a significantly lesser price.
The main reason why the labour costs vary is due to the fact that each individual job will have to be priced based on its own particular requirements and circumstances. Other influencing factors that’ll affect how easy a job is to complete, how much material will be incorporated and the duration of the project includes the size of the bathroom in question as well as the shape. However, there can be unforeseen complications like damaged piping which will also raise the price of the project and more.
View our Bathroom Fitter cost guide View our Bathroom Fitter adviceBathroom Fitter job | Bathroom Fitter cost in 2024 |
---|---|
Bathroom fitting in Burntwood | £1,840-£2,760 |
Bathroom design and install in Burntwood | £2,625-£4,025 |
Shower or Bath Fitting in Burntwood | £263-£403 |
Shower installation in Burntwood | £1,090-£1,635 |
Shower supply and installation in Burntwood | £600-£920 |
Toilet Fitting in Burntwood | £235-£390 |
Regardless of the quality or how perfect the products for your new bathroom are, getting the right bathroom fitter for your bathroom refit is just as important to your project as any other thing you can possibly think of. Hiring a fitter is quite simple, but hiring a fitter who can get the job done to your requirements is another thing entirely. To hire the right bathroom fitter, there’s the need to consider all the features of a bathroom as well as any specialized products you may have selected. For instance, you’re going to need a professional tiler if you have quartz resin tiles. Also, if you wish to fit some luxurious underfloor heating, you’d need the services of a qualified electrician. Here are some of the questions you should ask from your bathroom fitter when having your bathroom fitted.
Being one of the most used room in any home, sooner or later you’re likely going to find yourself needing a bathroom renovation. When that time comes, you’d probably want to know just how much it’ll cost to have your bathroom renovated? Well, the price of bathroom renovation depends on a wide variety of factors with the specifications of the bathroom being the most important. Therefore, if you’re looking for a top, medium or low spec bathroom, your price will vary accordingly. The other determinants of a bathroom renovation cost include the type of the materials, windows, shower, installation charges, size of the bathroom as well as the cost of other appliances. In this simple guide, you’ll get all what you need to understand the potential cost of renovating a bathroom and to develop a good estimate for your project as well.
Generally, a basic bathroom renovation in the UK will usually cost within the range of £3000 to about £6000. A mid range bathroom renovation in the UK is likely to cost within the region of £6000 to about £8000, while a high end bathroom renovation in the UK is likely to cost in the region of £10000 and above. It’s however important to note that these prices are only VAT and fitting inclusive. The labour cost for preparation which includes removing the existing bathroom, plastering and more are not included.
Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;
Preparation
Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.
When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.
Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.
MATERIALS
You’ll also need an extra pair of hands to help manoeuvre the bath into place.
Step 1
Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.
Step 2
Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.
Step 3
Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.
Step 4
Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.
Step 5
Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.
It's not a difficult task to replace an old toilet, as long as you can connect it to an existing branch of the soil pipe. You can cut your water usage significantly by fitting a dual flush toilet mechanism.
Step 1
Follow the manual's guidelines, assemble and insert the flush mechanism. Make sure you include the rubber sealing rings where necessary.
Step 2
Place the large rubber gasket into the flush ingang of the pan.
Step 3
Insert the bolts through the holes in the cistern, using the rubber and large metal washers supplied.
Step 4
Lift the cistern into the pan so the connecting bolts fit through the holes. The threaded section of the flush mechanism should go through the rubber gasket on the flush entrance of the pan.
Step 5
Fit washers to the connecting bolts, and tighten the wing nuts. Make sure you fit these securely - but don't over-tighten them.
Step 6
check if there are no either pipes or cables below the fixing points. Put the toilet in place, and slide the pan outlet into the flexible connector that's attached to the soil pipe. Then drill some pilot holes into the floor at the fixing points. If it's a solid floor, you'll need to make the holes with a hammer-action drill and plug them.
Step 7
Push plastic protective inserts through the holes in the base of the pan, and insert the retaining screws through and into the floor. If the cistern has fixing holes in the back, attach it to the wall by drilling and plugging. Remember to add rubber washers before you tighten the nuts.
Step 8
Connect the supply pipe for the cold water feed, using a push-fit tap connector.
Step 9
Fit the hinge assembly to the seat, following the manufacturer's instructions.
Step 10
Connect the seat to the pan by securing through the holes at the back, using the screws supplied. Then adjust it to sit in the correct position.
First and foremost, it must be stated that replacing an existing electric shower is much easier than fitting one from new. This is primarily due to the fact that the main components required which includes the water pipes as well as electrical connections will have already been established. In this post, we’re going to assume that all these are already in place which means you’re replacing an existing electric shower with a new one. It’ll also be an advantage if the preferred electric shower features cable and pipe entry points at the top and bottom as well as the rear and side so as to allow for more flexibility when it gets to routing cables and pipes. If you’re not confident enough to pull off this task, then it’s strong advisable to call in a professional who can guarantee the best results the first time. Here are the steps you can follow to fit your electric shower:
A thermostatic shower is simply a shower that only needs to be set at a given temperature and it automatically maintains this set water temperature all by itself. Typically, this type of shower functions with the three primary types of water system available in the UK. Thermostatic showers are very popular in residential buildings featuring both mains-fed hot water systems as well as combi-boiler systems due to the fact that they’re both renowned for the ease through which the flow of water can be affected by the actions of other individuals. In some events, this can mean the action of individuals in separate properties. As a result, gravity-fed water systems are usually more reliable, but even at that, thermostatic shower valves are mostly seen as an additional safety feature that’s quite useful should it be required. So how exactly does the thermostatic shower work?
A thermostatic shower makes use of a thermostatic valve to mix both the cold and hot feeds in the right proportion prior to channeling the water via the showerhead. As a result of the link that exists between water pressure and water temperature, this is able to maintain a steady flow. What’s more? Contemporary thermostatic showers can also shut down by itself if it observes that the supply of cold water has reduced to a level that’s considered to be unsafe which ultimately prevents scalding. What thermostatic showers simply does is to store hot water from the mains and then mix it with the right quantity of cold water in order to generate the desired temperature. They’re unlike electric showers which collect cold water from the mains and heat it up to the set temperature.
If you’re about to fit a new bathroom in your home, then you’d probably be wondering how much would be the labour cost of getting it done. Unfortunately, a single accurate answer can not be provided to this question as there are many influencing factors that can determine the labour cost to fit a new bathroom. In this guide, we’ll give you a good insight on the labour cost of installing a new bathroom.
While you can obtain a good evaluation when planning the work on your bathroom, the final cost can largely vary. For small jobs such as fitting a pedestal basin with taps, professional installers can charge within the range of £170 to £250. Meanwhile, bigger projects such as tiling an entire bathroom can cost an average fee of about £70 to £90 per square metre. Generally, the overall average cost of fitting a new bathroom is about £6,500 in the UK. But in an event whereby you’ll be switching to a bathroom suite that’s exactly like the old one which wouldn’t require extra flooring as well as tiling, there’s a high chance you may be able to complete the project for a significantly lesser price.
The main reason why the labour costs vary is due to the fact that each individual job will have to be priced based on its own particular requirements and circumstances. Other influencing factors that’ll affect how easy a job is to complete, how much material will be incorporated and the duration of the project includes the size of the bathroom in question as well as the shape. However, there can be unforeseen complications like damaged piping which will also raise the price of the project and more.
There is a range of space-saving toilets, showers and baths available. These are designed to accommodate small spaces and could mean that you can fit a bathroom in a small room that might otherwise be unused. This can be beneficial for an en suite where space is at a premium.
Answer a few quick questions to help us match you with the right Bathroom Fitter
Receive no-obligation quotes from 4 Bathroom Fitters working in Burntwood.
Compare prices, customer reviews and services, and hire the right Bathroom Fitter.
View our open Bathroom Fitter jobs near you
Join today