Find an Asbestos Removal Contractor you can trust in Wandsworth.

There is no legal requirement to have an asbestos survey done to sell your house. However, some mortgage lenders, estate agents and insurance companies may require one. Many home buyers and/or valuers will want to know before submitting an offer for your property.

It’s a legal requirement to get an asbestos survey done on non-domestic buildings and public areas of domestic buildings if they were built before 2000. So, if you’re responsible for maintaining one of these types of building, you must find out if an asbestos survey has been conducted, and get one done if it hasn’t.

For domestic properties, you only need to get an asbestos survey done if your home was built before 2000 and you want to do some building work. This is because if any materials containing asbestos are damaged during the work, they could pose a serious health risk, so might need removing first.

However, if you’re worried about asbestos in any parts of your home that are deteriorating, you might want to get an asbestos survey done anyway.

There are all different types of Asbestos. Some kinds of asbestos, if they are in good condition, may be left as they are or covered up. If there is any danger of the asbestos being damaged and particles entering the air, it should be removed. Once a survey has been completed you will be advised on what course of action to take.

By now, every homeower should be fully aware of the dangers of asbestos due to the fact that it can be found in a wide range of building products from the roofs and walls and right down to the floor tiles. An exposure to asbestos especially when disturbed can be life threatening as it can lead to a plethora of health issues which includes lung cancer, mesothelioma, asbestosis and lots more.

Asbestos are more dangerous when damaged or disturbed, but if they’re found in a great shape and are left undisturbed, then asbestos containing materials poses little to no threats. This dangerous material can be found in a large variety of insulation. And when compared to batt insulation, loose-fill insulation can be highly dangerous when it’s not installed in the right way. When poorly done, several particles of the asbestos can be released inside the wall or around pipes. As a result, insulation becomes a big worry that most homeowers will face down the road.

Homes that were constructed before the 1980’s commonly features steam pipes, hot water pipes as well as furnace ducts insulated with asbestos containing materials. And this is primarily because there’s no other fire retardant, thermal as well as acoustic insulator like asbestos that’s as effective and affordable as it is. However to really know if your building’s insulation is made with asbestos containing materials, you can take the following steps:

✓ Find out when your house was built. If it was constructed or renovated before the 1980’s then it’s likely to contain some asbestos materials.

✓ Although this is not advisable, but if you plan on checking the insulation by yourself, you should ensure to put on protect equipment such as goggles, gloves, masks and a safety suit.

✓ Check for insulation available in the building. The asbestos containing insulation in both batt and loose-fill types are grey-coloured so this shouldn’t be too hard to spot.

✓ Examine the pipe coverings especially the blanket type and cardboard coverings.

How To Remove Asbestos

Asbestos are naturally occurring fibrous material that used to be incorporated into fabrics or mixed with cement for insulation purposes be it electrical or building. As it’s highly dangerous and life threatening if disturbed, the material has been in the UK since 1999, however there are some exceptions. If you happen to reside in a house that has been in existence prior to 1980, then there is a chance your house contains some asbestos. You may discover it in your home when carrying out some DIY tasks or renovation. And once you do, you should waste no time in having it removed as the longer you’re exposed to it, the more life threatening it becomes.

Removal of asbestos is a task you should never try to do by yourself as it becomes harmful when disturbed. In an event whereby you suspect something to be asbestos, do not touch but rather have it isolated and call in a specialist for help. So it’s therefore not recommended to attempt asbestos removal as a DIY project unless you’re are experienced in the techniques below:

✓ Before you get started, it’s crucial to wear the necessary protective gear. These include wearing a respirator, a disposable coverall, disposable rubber gloves, rubber boots as well as safety eye goggles. And ensure that you remove all protective gear clothing and gear before exiting the containment area.

✓ Remove the materials and place in asbestos waste disposal bags

✓ Ensure to remove the asbestos without breaking it up.

✓ Make use of double bag and seal all debris containing asbestos.

✓ Wipe down all surfaces with a damp cloth

✓ Fold and roll the polyethylene sheeting on the floor and dispose them same way as the debris - double bag and seal.

✓ Clean all tools and equipments used.

✓ When done, ensure to wash face, hands and bathe thoroughly.

Asbestos is a perfect example of a silent and hidden killer. The harmful fibre it releases is not only totally invisible to the eye, but also absolutely odourless, therefore can’t be smelt. As a result, you can walk into a room completely filled with asbestos and you still won’t suspect a thing. If you live in an old building ( built before the 1980’s) in the UK, it’s very possible that there’s some asbestos in the house.

Asbestos causes up to 5000 deaths in the UK on a yearly basis. When asbestos materials are disturbed, they release asbestos fibres, which when inhaled can result in lung cancer, asbestosis as well as mesothelioma which are all painful and fatal diseases. And perhaps even more importantly, you won’t notice any symptoms of having these diseases until after several years after your first exposure to asbestos fibres.

Therefore, to reduce these numbers, there’s a crucial need to to know how to identify asbestos so as not to put both ourselves and loved ones at risk.

There are three types of asbestos which includes blue or crocidolite, brown or amosite, and white or chrysotile. So they can easily be identified by their respective colour names, right? Wrong! Asbestos fibres can not be seen with the eye, it can only be detected under a microscope. They’re very tiny and light, and once disturbed and in the air, they can float can days. Asbestos are commonly found in several building materials such as cement products, floor tiles, paints, adhesive, partitions, cladding, insulation, doors and lots more. With its wide acceptability in the past, any building product you can probably think of could contain asbestos.

If your house is built before the 1980’s it’s likely to contain some form of asbestos material which when disturbed can release some harmful fibres whose inhalation can lead to a number of fatal diseases and health issues like lung cancer and asbestosis. If you suspect that your house contains some asbestos materials, the best step to take is to call in a qualified asbestos consultant to carry out a thorough inspection of the area so as to identify the potential asbestos containing materials in your property.

The result of the testing done will bring a peace of mind as it’ll confirm whether or not the material actually contains asbestos. In the event whereby the testing result shows that the material does not contain asbestos, this will significantly reduce your renovation or demolition cost. So if you’re wondering how asbestos testing can be done, simply continue reading.

Identifying asbestos is as simple as just looking at the material with the naked to check if it contains the harmful substance. The presence or otherwise of a potential asbestos containing material can only be confirmed by laboratory testing. A qualitative identification of asbestos in a bulk sample is the best method for testing for asbestos. This asbestos testing process involves taking a look at the fibres under a polarized light microscope and under varying conditions to determine the kind of asbestos it is, if present. The result of the testing, if positive, will identify the type of the asbestos discovered and this can be either white or chyrsotile asbestos, brown or amosite asbestos or, blue or crocidolite asbestos. However in the event whereby the sample doesn’t contain any asbestos, the test result will show NAD or No Asbestos Detected.

Many examples of asbestos will not need removing, for example if it is present in artex that is in good condition. However, if you are carrying out building work on or near the asbestos it should be carefully removed before the building work starts to make sure it is not accidentally disturbed.