Find an Asbestos Removal Contractor you can trust in Biggar.

For some types of asbestos, you are not legally required to use a licensed contractor. However, it’s recommended that you always use one. These contractors will have all the relevant training and knowledge to make sure asbestos is removed safely. The Health and Safety Executive (HSE) is the licensing body.

What Does Asbestos Cause?

The perfect example of a silent killer is asbestos. Wonder why? From the day of exposure, you might not see any symptoms of the asbestos containing material disease till years later and more often than not, these disease are not treatable. And as dangerous at it is, it’s most likely not something you’d think about on a daily basis unless you’ve been affected by this harmful material or probably someone you know has.

Found in rocks and soils, asbestos have been an important material for manufacturers across the globe for numerous reasons. Not only are they exceptional insulation materials in both electrical and buildings, but they’re also flexible and resistant to heat, chemicals as well as electricity. And due to this fact, they represent a very common material that’s used in automotive parts, construction materials as well as textiles.

Asbestos when disturbed and inhaled for a long period of time can significantly increase your risk for diseases such as lung cancer, mesothelioma as well as asbestosis. Smokers are more likely feel a greater impact as cigarette smoke irritates lung passages which makes it a lot more difficult for the lungs to remove asbestos fibres.

Mesothelioma. This is a form of cancer that affects the lining of the lungs as well as the lining surrounding the lower digestive tract. By the time diagnosed, it’s almost always fatal.

Lung Cancer. This asbestos related lung cancer is almost the same with that caused by smoking and other causes.

Abestosis. This is a serious scarring condition of the lung which usually occurs after exposure to asbestos after a lengthy period. It can lead to shortness of breath, and in some cases, can be fatal.

Are you planning to remove or renovate your garage? Before proceeding with the intended project, it’s usually essential to firstly determine whether or not your garage contains asbestos. However, asbestos isn’t the easiest material to identify and even more so when you’re unsure of what it looks. The fibres on the other hand are not visible to the eye and can’t be smelt as it’s odourless. In this article, we’ll provide you some helpful tips to spot an asbestos garage roof. Let’s take a closer look!

✓ Figure out when the building was constructed. In the year 1999, a ban was placed on the use of asbestos in the UK, both to manufacture and supply of asbestos materials. As a result, if your garage was built before this period, then it’s very likely that an asbestos containing material was used. It’s also important to note that several garage roofs that contain asbestos are constructed with the help of flat or corrugated sheets of cement.

✓ Check the surface. When cement contains asbestos its usually fairly thin with visible fibres running through it. Also, the surface of the cement will have a texture and also some craters. If you an older cement sheets is incorporated, there’s a high chance that it contains asbestos.

✓ How it’s built. Asbestos materials are usually joined together by aluminium runners and help in position with nails that are blunt-ended. Take a look at the joints, if the sheets inside is held together by wooden or plastic runners then there’s danger.

Finally, roofs made from asbestos cement has a good chance of becoming very brittle.

Asbestos is very dangerous if inhaled. It can cause a variety of lung-related diseases. Asbestos will generally not be released into the air unless it is disturbed. You should be very careful if you suspect there may be asbestos in your home and have a survey carried out to check that it is not being released into the air.

If your house is built before the 1980’s it’s likely to contain some form of asbestos material which when disturbed can release some harmful fibres whose inhalation can lead to a number of fatal diseases and health issues like lung cancer and asbestosis. If you suspect that your house contains some asbestos materials, the best step to take is to call in a qualified asbestos consultant to carry out a thorough inspection of the area so as to identify the potential asbestos containing materials in your property.

The result of the testing done will bring a peace of mind as it’ll confirm whether or not the material actually contains asbestos. In the event whereby the testing result shows that the material does not contain asbestos, this will significantly reduce your renovation or demolition cost. So if you’re wondering how asbestos testing can be done, simply continue reading.

Identifying asbestos is as simple as just looking at the material with the naked to check if it contains the harmful substance. The presence or otherwise of a potential asbestos containing material can only be confirmed by laboratory testing. A qualitative identification of asbestos in a bulk sample is the best method for testing for asbestos. This asbestos testing process involves taking a look at the fibres under a polarized light microscope and under varying conditions to determine the kind of asbestos it is, if present. The result of the testing, if positive, will identify the type of the asbestos discovered and this can be either white or chyrsotile asbestos, brown or amosite asbestos or, blue or crocidolite asbestos. However in the event whereby the sample doesn’t contain any asbestos, the test result will show NAD or No Asbestos Detected.

Asbestos is a perfect example of a silent and hidden killer. The harmful fibre it releases is not only totally invisible to the eye, but also absolutely odourless, therefore can’t be smelt. As a result, you can walk into a room completely filled with asbestos and you still won’t suspect a thing. If you live in an old building ( built before the 1980’s) in the UK, it’s very possible that there’s some asbestos in the house.

Asbestos causes up to 5000 deaths in the UK on a yearly basis. When asbestos materials are disturbed, they release asbestos fibres, which when inhaled can result in lung cancer, asbestosis as well as mesothelioma which are all painful and fatal diseases. And perhaps even more importantly, you won’t notice any symptoms of having these diseases until after several years after your first exposure to asbestos fibres.

Therefore, to reduce these numbers, there’s a crucial need to to know how to identify asbestos so as not to put both ourselves and loved ones at risk.

There are three types of asbestos which includes blue or crocidolite, brown or amosite, and white or chrysotile. So they can easily be identified by their respective colour names, right? Wrong! Asbestos fibres can not be seen with the eye, it can only be detected under a microscope. They’re very tiny and light, and once disturbed and in the air, they can float can days. Asbestos are commonly found in several building materials such as cement products, floor tiles, paints, adhesive, partitions, cladding, insulation, doors and lots more. With its wide acceptability in the past, any building product you can probably think of could contain asbestos.

The ability to identify exactly what an asbestos looks like can possibly save you from deadly health conditions that can arise as a result of a prolonged exposure to the dangerous material. It is one of the most frequent questions asked by homeowners in the UK and for a good reason. However, this question is not as simple or straightforward as it sounds because asbestos can actually take on a number of forms. As a result, this makes it a lot difficult to identify asbestos just by visual analysis or comparing an area which you suspect to be an asbestos to an example online. Therefore, the best way to truly identify if the area you suspect is really asbestos, then you’d have to send away a sample of the material to a certified asbestos testing lab in a safe way.

This happens to be the most effective way to verify if there’s a presence of asbestos in your home or property. Legally speaking, commercial properties are necessitated to undergo a total asbestos audit which involves carrying out lab tests on each and every material that’s suspected to include the deadly asbestos fibre substance. From these tests, you’ll get to know whether the asbestos present are friable or non friable which can go a long way to help identify the level of risk that’s posed by various building materials.

Upon the reception of the suspected asbestos-contained material, a certified asbestos testing laboratory will incorporate a form of transmission electron microscopy to reveal as well as determine the type of asbestos fibres that are in the sample. In the event whereby you discover a material you suspect to be an asbestos in your home, do not just go ahead to remove it. It’s strongly recommended to call in a specialist who can help to safely remove and send the suspected material to the lab for verification before further actions would be taken.

Being a commonly used building material in the 1950’s to about 1990’s, asbestos is very popular back in the days and used for almost every roofing project because of it fire resistant properties. They’re mostly mixed with cement and are known to last for over 4 decades.

Due to the harmful properties found in asbestos, the material was totally banned in the UK since the year 1999. It’s found that when disturbed, asbestos releases some fibres which when inhaled can result in some deadly health conditions such as lung cancer and asbestosis, which are all fatal. These diseases are mostly not detected until several years after the first exposure to the asbestos fibres, which makes them even more deadly. Hence, it’s crucial to know how to identify asbestos roof tiles so you can have them removed by a professional immediately. In this article, we’ll show you what you can look out for to identify asbestos roof tiles. Let’s take a look!

Asbestos roof tiles are typically square shaped and they also generally possess a combination of grey and black colour. Although asbestos can feature a number of colours based on the kind of material you mix with it. In truth, asbestos can be very tricky to identify, when disturbed not only are their fibres totally invisible to the naked eye but they’re also completely odourless. This implies that you may not even be aware that you’re exposed to such harmful material for a prolonged period of time. In order to accurately identify asbestos roof tiles, the only thing you can possibly do is to call in a UKAS accredited laboratory to have them tested. This way, you’ll have a peace of mind knowing the result will point you in the right direction.