Find an Air Conditioning Engineer you can trust near you.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

Featured in the 2022 Springtime Statement, Rishi Sunak, Chancellor of the Exchequer, revealed that from April 1st, 2022, 0% VAT would certainly be launched to the setup of Central air conditioning products.

With Air Conditioning being included in the 0% VAT, the moment to mount a Domestic Central air conditioning product can not be much better, and also due to the system including products that have the options to introduce both cool and also hot air into the atmosphere that they are mounted in, the financial savings that could be attributed to them in comparison to Air Source Warm Pumps, might make them one of the cheapest methods to keep your house at optimum temperature.

For the last couple of years, with more of us spending even more time at home, the leading central air conditioning producers have all prolonged their domestic central air conditioning ranges. LG's Art Cool Mirror, Mitsubishi's Zen, Daikin's Stylish & Emura and the Panasonic Etherea are simply a few of the systems that supply a variety of heating and cooling down advantages to property owners.

Many domestic air conditioning systems are smaller, they can be wall, floor or ceiling mounted, are available in a large range of colours, some have actually constructed in Wi-Fi and picked models have added attributes including air cleansers.

Homeowners are currently saving when buying domestic air conditioning units with no VAT.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

When getting a new air conditioning system, it’s essential to always go for one that’s energy efficient, otherwise you’ll end up paying more money on your heating and cooling bills than necessary. Over the years, a variety of air con units have been developed which ultimately makes it a bit tricky trying to separate the “the boys from the men. Not all are created equal and most home and property owners who do not take the necessary measures and put certain things into consideration when buying a new AC system often go back home with the most visually appealing unit rather than an energy efficient one.

When purchasing a new energy efficient system, there’s a need to look out for some things that can go a long way to help keep your heating bills and your home’s temperature low. Let’s take a look!

• Get the appropriate size for your space. One of the biggest mistakes you can make when buying a new air conditioner is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy.
• Energy saving setting. Always look out for this feature when buying a new unit. This allows the unit to turn off both the compressor and the fan once the space has been cooled off which in turn helps you conserve energy.
• ENERGY STAR® Certification. When deciding on the best air condition for your home, always look for the blue ENERGY STAR® certification. This implies that the unit has met or exceeded certain higher efficiency standards than other similar models.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

Nothing provides you with more relief during the hot summer months than having a fully functioning air conditioning system at home. If you seek to keep your surrounding cool, then your best bet would be to install an air conditioning system. The system functions mainly by transmitting air over a specific temperature to outside from the inside and then replaces it with the cooled air. The outcome of this is a comfortable, conducive and relaxing environment to live, play or even work. Asides the cooling advantages provided by air conditioning systems, they’re also able to deliver other great benefits like removing pollutants and improving the indoor air quality of your living space. What’s more? They also feature filters which works to keep out both insets and parasites. So when making a purchase decision, most homeowners are usually concerned about the cost of buying and installing these air conditioners. If you’re also interested in knowing the cost, here’s what you need to know.

There are different types of air conditioning units with each having it own unique prices. Let’s have a look.

✓ Portable air conditioning unit - £300 to £600

✓ Fixed air conditioning unit - £800 to £1000

✓ Installation Charges - £130 to £200 per day

The prices of these air conditioning units varies depending on a number of factors. Some examples of these price influencing factors include the height of the ceiling, the exact number of both the doors and windows, construction or design of the property and finally, the number of people it can cover at a go.

You need to determine the air conditioning unit’s size as well as the size of the area. Generally, a ton of AC unit is perfect for cooling an area of about 400 square feet.

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.