Find an Air Conditioning Engineer you can trust in Plymouth.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

Air conditioning filters can get dirty over time, especially through heavy use. This can have a major impact on how efficient a unit is, increasing how much energy it uses and reducing how effective it is.

This is why it’s a good idea to service your air conditioning system regularly. Part of this should involve checking, cleaning and replacing your filters, to help your units run as efficiently as possible.

Air conditioning is a way of controlling air temperature, humidity, quality and movement in an inside space. Air conditioning is best known as a way to cool down air temperatures in properties. But it can be a great, efficient way to heat your home or business too. You can also use it to reduce the moisture in your air in humid or damp conditions, and filter out things like dust and pollen. There are lots of different types of air conditioning available, so you can pick one that suits you and your property.

What is the essence of calling a place “home”, if it doesn’t guarantee your comfort? A home should serve as a getaway from the chaos outside world, where you can relax and spend great time with your family. However, what makes house really a home goes way beyond simply having a place to live and sleep. It’s a fact that we all love comfort and where else should one be able to get that if not inside one’s home? And that’s exactly where an air conditioning system comes in! However, having a heating and cooling system installed at home provides you with more benefits than just comfort. They also go a long way to ensure provide us with safety as well as a better quality of life within the four walls of our home. In this post, we’re going to look at some of the top reasons why you should get an air conditioning system installed at home.

• A more secure home. More often than not, when our personal space is air conditioned we keep the doors and windows closed which makes it a lot difficult for an intruder to break into the home.
• Reduced possibility of asthma attacks. Since an AC system is able to minimize your home’s humidity and reduce the amount of mold, mildew, pollen and other air borne outdoor allergens, the risk of suffering an asthma attack is greatly reduced.
• Reduced number of pests and parasites. It’s a fact that you can help even your dog fight off fleas with an AC system. Air conditioning filters are a lot more effective in preventing bugs entry into a hme than an open window.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

When it comes to getting an air conditioning unit for your property, one of the greatest mistakes you can possibly make is purchasing and installing the wrong type as well as size in your personal space. In the event whereby you happen to go for an AC unit that’s too small, it won’t be powerful enough to cool your room as you would like. However, when you go ahead to select an oversized AC unit, your room would be cooled relatively quick but will leave the air in your room with excess humidity and consume more electricity as it’s going to cycle on and off which will ultimately cost you more money. As a result, it’s always a smart move to put some things into consideration before making any financial commitment. In this post, we’re going to consider how you can determine the perfect air conditioner for your building. Let’s take a look!

• Determine the appropriate size for your space. When buying a new air conditioner, one mistake you should never make is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy. To get the appropriate size, you’ll have to take the measurement of the room’s square footage using a tape measure, calculate the room’s square footage and determine the cooling capacity required for the room in question which is measured in British Terminal Units (BTUs)/hour.
• Look out for the ENERGY STAR® certification. It’s crucial to buy and install an air conditioning system with the blue ENERGY STAR® certification. This means that the unit has met or exceeded certain higher efficiency standards than other similar models.

In several parts of the UK, air conditioning systems are a must especially in the warmer summer months. Fortunately, if your AC system isn’t functioning the way it’s supposed to, suffers frequent system breakdowns when overworked mostly during the hot summer days or perhaps you’re just tired of just having to manage with window units, the latest air conditioning units offers both features and performance that’s superior to the earlier models. And as you would have expected, each facet comes with a cost.

There are a number of factors that can determine the cost of an air conditioning unit. Out of all these factors, the size of your home happens to be the most significant factor that influences an air conditioning unit’s cost. Air conditioning systems are measured in tons, which is a measure of the amount of heat they’re able to remove from a home within an hour. As a rule of thumb, you’ll require about 1 ton of cooling per 500 to 600 square feet. Unfortunately, the square footage alone can’t be used to determine the tonnage. Other factors that’ll also play a significant role includes the efficiency of your most preferred AC unit, how well the home is insulated as well as the thermal nature of your home. On the average, a new air conditioning system for an average home should be within the range of £1000 to £3000 for a unit as well as the installation costs which can vary largely depending on the condition of your ducts. These figures may seem quite expensive, but when the hot summer days come, you’d be glad to have had one installed in your home.