Find an Air Conditioning Engineer you can trust in St Ives.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

We all know how helpful air conditioning systems can be especially during the hot summer season which is great at making your home feel nothing less than an inferno. So if you have an AC system, you’d probably want to know if leaving it on will be cheaper and more efficient.

The short and simple answer to this question is yes, leaving your air conditioning system on will make make it cheaper and more efficient. This isn’t what you or many other people will have in mind though. Under no circumstances should you leave you air conditioning system on full blast 24/7. To make your air conditioning system more efficient by leaving it on has a right and wrong way you can go about it. Let’s have a look!

If you’d ever noticed, any time you turn your air conditioner off during a very a hot day, even if it’s for just a couple of hours, things tend to get thrown out of balance pretty quickly. When turned back on, your AC system will have to work even harder to restore the usual comfort levels in the room. When you abuse this dial in such a fashion, the AC system can only become more inefficient rather than making your home more comfortable quickly.

On the other hand, your AC system ( when tuned to the right settings) can help maintain the proper temperature and humidity balance within your home instead of turning it off while away. And upon getting back, you can simply turn down the thermostat a bit which helps you prevent the usual stagnant air that you’d be hit with when your return home (with the AC system turned off) that’ll have you racing for the dial.

Most air conditioning units will need yearly maintenance. This will involve a full service and cleaning of filters. In very dusty areas units may need more frequent maintenance. Regular servicing will extend the life of an air conditioning unit. Keep a record of when this is done so you know when to contact someone!

If you have a conservatory constructed on your property, then you should be able to to tell how uncomfortable it can get considering the UK’s harsh climate. This climate can get swelteringly hot during the summer months and also quite chilly during the winter months. As a result of being constructed with so many plain glass, conservatories are usually at the mercy of the weather outside which often limits the usage of the structure to only a few months within the year. Hence, the need to have an air conditioning system installed by a reliable professional so as to ensure you enjoy your conservatory all year round. In this post, we’re going to consider some of the benefits you stand to derive by hiring experts to install your conservatory’s air conditioning.

• They possess the experience, skills and tools necessary to complete the project. When the construction job done right the first time, this will go a long way to save you both time and money on potential costly mistakes if you decide to undertake the project yourself.
• They can help keep your project on budget. When it comes to fitting appliances like AC systems, it’s usually very easy to go over your budget when done alone. Since expert conservatory air conditioning installers are vastly experienced in the field, they know the cost implication for the task and can help ensure you don’t overspend or go over your budget.
• They’re insured. The benefit of hiring an insured professional can’t be overstated. What this gives you is total peace of mind knowing fully well if anything goes wrong during the installation process, you’re fully covered by the expert’s insurance company.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

As the heat start to come up especially during the summer months, the swelter will mercifully be kept in check by air conditioning. The technology has made a significant impact on modern life and it can now be considered a norm for all new and modern homes. So if you’re also planning to fit new HVAC air conditioning systems in your home or property, you may also be interested in knowing exactly how it works. In this article, we aim to provide you with an in depth insight into how air conditioning operates. Now let’s take a closer look at the process!

✓ A grille at the bottom of the machine absorbs warm air from the room

✓ The warm air is transmitted over some chiller pipes through which a coolant fluid is circulating. Working in a similar fashion as the chiller cabinet in a refrigerator, this part cools down the transmitted warm air and any excess moisture is duly removed by a dehumidifier.

✓ The air is then transmitted over a heating element which is quite similar to the one present in a fan heater. On a cold day, this part of the unit can be turned up in order to allow the HVAC works as heater.

✓ A fan which is positioned at the top blows the air back through another grilled into the room.

✓ Coolant flows through the the chiller pipes. In the process, it carries heat from the air blowing past the pipes and then it evaporates - converting the cool liquid into a hotter gas. This heat is then transported to the outside of the building from inside the room.

✓ With time, the heat inside the building slowly blows away into the outside air.

We all know how helpful air conditioning systems can be especially during the hot summer season which is great at making your home feel nothing less than an inferno. So if you have an AC system, you’d probably want to know if leaving it on will be cheaper and more efficient.

The short and simple answer to this question is yes, leaving your air conditioning system on will make make it cheaper and more efficient. This isn’t what you or many other people will have in mind though. Under no circumstances should you leave you air conditioning system on full blast 24/7. To make your air conditioning system more efficient by leaving it on has a right and wrong way you can go about it. Let’s have a look!

If you’d ever noticed, any time you turn your air conditioner off during a very a hot day, even if it’s for just a couple of hours, things tend to get thrown out of balance pretty quickly. When turned back on, your AC system will have to work even harder to restore the usual comfort levels in the room. When you abuse this dial in such a fashion, the AC system can only become more inefficient rather than making your home more comfortable quickly.

On the other hand, your AC system ( when tuned to the right settings) can help maintain the proper temperature and humidity balance within your home instead of turning it off while away. And upon getting back, you can simply turn down the thermostat a bit which helps you prevent the usual stagnant air that you’d be hit with when your return home (with the AC system turned off) that’ll have you racing for the dial.

If you want to guarantee the comfort of those inside your work environment, getting a commercial HVAC system should be a top priority. And if you already have one installed, knowing the best time to have it replaced rather than repaired will go a long way to save you some huge bucks. For instance, an air conditioning system that’s old and malfunctioning is best replaced due to the fact that all the components are probably weak and can only keep generating series of faults till it finally breaks down beyond repair. When evaluating your air conditioning unit, there are some factors that you’ll need to take into account to save yourself some money and headaches. Let’s take a look!

• Age. If your commercial HVAC system is within 15 to 20 years old and starting to look like a giant rust attached to your building, then its probably time to get a replacement. Also when old, most commercial air con systems are usually much less efficient and will consume more energy which implies higher energy bills.
• Wear and tear. If your system has experienced a significant amount of wear and tear, then its probably not heating or cooling as efficiently as it used to. Depending on the product’s quality as well as the level of maintenance many commercial HVAC system would be overdue for an upgrade by the time they’re about 15 years old.
• Malfunctions. When it comes to heating and cooling systems, some issues are quite easy to fix or resolve while others ( such as a broken furnace fan or refrigerant problems) should be best left to the experts. However, if the malfunctions are becoming more often or serious enough, then you should probably consider getting an upgrade.