Find an Air Conditioning Engineer you can trust in Biggleswade.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

As the summer months draw nearer, you get better accustomed to the ambient noise produced by your air conditioning system which is constantly in operation to keep your home cool and comfortable for both you and your loved ones. During this period, it’s absolutely normal to expect a spike in your energy bill and wish to know how you can limit the expenses without having to sacrifice your home’s temperature. In this guide, we’re going to consider some of the major ways you can save energy in your home without having to sacrifice your air conditioning system. Let’s take a look!

1. Reduce phantom loads. This is an electronic appliance that still makes use of energy even when turned off and not in operation. These phantom loads are actually everywhere in your home but you just don’t know that the television, toaster or even your phone’s charger continue to suck electricity when they’re not in use.
2. Incorporate more energy-efficient appliances. Before making a purchase, ensure that the appliance has the Environmental Protection Agency’s Energy Star Label as they use 10 to 15 percent less energy than their counterparts.
3. Change out your light bulbs. The older your incandescent light bulb gets, the more energy it consumes. You can cut cost by reglarly changing them out.
4. Install a programmable thermostat. With such a device, you can adjust your home’s temperature to your schedule and needs to cover for the time when you would not be home.
5. Use fan. A cooling fan can significantly lower the cost of running an AC system.
6. Seal all air leaks. Blocking all air leaks in your home is a great way to ensure energy is well maximized
7. Make your windows more efficient.
8. Enhance you insulation
9. Conduct a regular servicing of your AC unit
10. Setting the air conditioning temperature higher at night

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

There are a wide range of ways in which having an answer to this question can help home and property owners. For instance, this can help you predict the cost before fitting a new unit. However, regardless of your purpose, this guide has been created to give you an idea of the energy usage that’s associated with different types of air conditioners. Let’s take a look!

First and foremost, it should be said that there’s no straightforward answer to this question as there a number of variables that can affect the energy efficiency of one’s air conditioning unit. As a result, the calculations for your personal space may vary from the estimates you’ll see on the internet. For example, the type of air conditioner you choose to install will be a key determinant of your system’s energy usage.

• On the average, a central air conditioning system incorporates within the range of 3000 and 3500 watts per hour during the summer months. However, if you happen to operate the “fan only mode of your central air conditioning unit, the energy usage will most likely drop to about 750 watts per hour.
• For a mid sized portable air conditioning unit, you can expect the system to consume an average of 2900 watts per hour. However, large units as you would have expected would exceed the energy usage of central air conditioning units, this can be up to 4100 watts per hour.
• For a mid sized window air conditioning unit, this will consume about 900 watts per hour. While you can expect the smaller unit to use about 500 watts per hour and the larger ones to consume about 1440 watts per hour.

Do you wish to save money on your air conditioning expenses and energy bills? If yes, then you’ve come to the right place. In this post, we’re going to consider some of the common myths you shouldn’t buy into if you really wish to save some money on your air conditioning system. Let’s take a look!

• The size of the system does not matter. This is one of the biggest mistakes you can make when purchasing an air conditioning system. A too large system will not only consume more energy meaning more higher heating bills, but will also keep turning off till it finally breaks down. And on the other hand, a system that’s too small would have to work harder to have your space cooled which means that it’ll wear down sooner. Consult a specialist in order to determine the right size of HVAC unit for your home.
• Turn down the temperature for a faster cooling. The fact here is, your AC system works just as hard whether you lower it 4 degrees or 25 degrees. Therefore, getting the temperature you want is just a matter of time. Also, you can end up paying a higher bill if you set it lower than you need to and in the process you happen to forget about it. Here, using a programmable thermostat can save you money and you’ll also get the temperature you really want.
• You don’t have to change the air filters. This is an idea you never buy into if you wish to save money. Air filters are usually inexpensive and can save you huge repair costs as well as heating bills on the long run. Normally, air filters should be replaced every 30 to 90 days by a specialist.