Question 1

How to install solar thermal panels?

Accepted Answer

We always recommend that you ask an MCS-registered company to install your solar thermal panels so you can take advantage of the RHI and any other schemes that may come up in the future. However, if you’re sure you want to do it yourself or you just want a rundown of what the installers will do, here are the general steps on how to install solar thermal panels: After the installer’s measured up, given you an estimated output and recommended some systems for you, they’ll arrange date to come to your home to install the solar thermal panels. They’ll also let you know if any scaffolding will be required. Next, they will start to fit the panels, or collectors, to your roof. Stainless steel brackets will be provided with the system and they will remove your roof tiles or slates to attach the brackets to the rafters. They’ll then replace the tiles and add waterproof flashing to ensure you don’t get any roof leaks, and add the frame. If you’ve chosen evacuated tube solar thermal panels, the installer will bolt the heat transfer unit to the top of the frame but not install the tubes until nearer the end. This is because the tubes start to transfer heat to the exchanger immediately, and when everything is unconnected this could damage the unit. If you don’t need a new boiler with your installation, a new dual coil water cylinder, pump and system control system will be fitted. It’s best in a loft or upper floor of your home. A new thermal store or hot water tank that will store the heat provided by the solar system is much larger than a standard tank but it may fit in the spot of your old one. The installer will ensure that it’s connected to the mains cold water, your other heating source (such as a gas boiler or biomass boiler), immersion heater, temperature sensors and the solar collectors themselves. Next they will install the pumping station, usually near the water tank. The expansion tank will be installed on the solar thermal loop, which is usually nearby. Its job is to prevent pressure changes that could damage the system. You’ll get a heat generation meter which must be MCS-certified if you want to take advantage of the RHI, and any control equipment that comes with the system will be installed. The installers will then bring the system to pressure by pumping the heat transfer liquid into the system up to a pressure of around 2 bar. Finally, your MCS-registered installer will register your solar thermal system so you can apply for RHI payments of up to £525 per year. So that’s the process of installing solar thermal panels. Remember – it's always best to use a professional to install any kind of renewable technology.

Question 2

Is solar thermal worth it in the UK?

Accepted Answer

We certainly think solar thermal is worth it in the UK. While we have cold winters that affects the amount of sunlight we get during those months, solar thermal panels can still generate a little heat in the winter on sunny days, and your back-up boiler or immersion heater can do the rest. The average cost of a 6m2 solar thermal system in the UK is £4,500. While that might seem like a lot of money up front, you’ll be able to make back some of that cost through Renewable Heat Incentive (RHI) payments. The RHI is a Government scheme that pays you for every unit of renewable heat that you generate, and a 6m2 system could earn you up to £525 per year over seven years. That means you could end up paying less than £1,000 for free renewable heat for your home! As well as the RHU, you’ll see a saving on your fuel bills since you’ll be less reliant on your traditional form of heating. If you have a natural gas boiler, you could save up to £60 a year on your bills, while if you’re switching from LPG the savings could be as much as £100 per year. So, we definitely think solar thermal is worth it in the UK! Plus, you’ll be reducing your carbon footprint and contributing to cleaner air for everyone in the country, so you can feel good knowing that you’re doing your bit.

Question 3

How many solar thermal panels do I need?

Accepted Answer

Generally, the amount of solar thermal panels you need depends on the number of people living in your home. Experts say that as a rule of thumb you’ll need 1m2 of solar panels for each adult living in your home. So if you live in a 4-person household, you can expect an MCS-registered installer to recommend you a 4m2 system. However, if you have any obstructions near your home that could increase shade on your panels, you might be encouraged to go up to nearer 2m2 per person. You want to make sure that your panels can produce enough hot water for your home as you’ll rely less on your back-up form of heating, which might be a gas boiler or electric immersion heater. Maximise the free energy from the sun and you could save up to £60 per year if you have a gas boiler, £70 if you have an immersion heater or £100 if you have an LPG boiler. Of course, you’ll also need to make sure you’ve got enough roof space for the amount of solar thermal panels that you want, but your installer will be able to advise you on the best course of action.

Question 4

Can I install solar thermal panels myself?

Accepted Answer

In theory, you can install solar thermal panels yourself. But it’s best to leave it to professionals. We’ll explain why here. Solar thermal panels work in a similar way to solar PV panels. They use collectors, in the form of evacuated tubes or flat plate collectors, to collect heat from the sun and use it to heat up water that’s stored in a hot water cylinder. You can use a boiler or immersion heater as a back-up to heat the water further so it’s at the temperature you want. So should you install a solar thermal system yourself? It certainly seems tempting since you can buy full solar thermal DIY kits with everything you need for £1,500 to £2,000. To have a solar hot water system installed by a professional, you’re looking at between £5,000 and £6,000, so it looks like there’s a significant saving to be made. However, if you want to take advantage of the Renewable Heat Incentive (RHI) payments, which is a Government scheme where you’re paid for using a renewable energy source to heat your home and/or its hot water, you can’t install it yourself. You need to engage a Microgeneration Certification Scheme-registered installer who can issue you with a certificate to say that the solar thermal panels have been installed correctly. For a 4m2 system that serves a 4-person household, the payments could be up to £375 per year. That means you could pay your system off within 14 years, and that’s not taking into account any of the savings you’ll make on your energy bills. So, while you can install solar thermal panels yourself, it’s much better in the long term to have them installed by an MCS-registered company.

Avg. price low	Avg. price low £2,280
Avg. price	Avg. price £2,850
Avg. price high	Avg. price high £4,275

	Material cost	£2,800
	Waste removal	£50

Solar Thermal Panels (Supply-only) in Boston

Compare Solar Thermal Panels (Supply-only) Prices in Boston

Average Supply-only solar thermal panels cost in Boston

Average price per Supply-only solar thermal panels job in 2024

Supply-only solar thermal panels installation cost in Boston 2024

Supply-only solar thermal panels searches in November 2024

Supply-only solar thermal panels Projects in Boston in October 2024

2,713

0

0

Supply-only solar thermal panels searches in cities and towns near Boston October 2024

Supply-only solar thermal panels near you

Looking for Supply-only solar thermal panels in Boston?

Get free quotes from local solar panel installers

How it works

Tell us about your Supply-only solar thermal panels project

Find up to 4 Solar Panel Installers in Boston

Hire with confidence

Our reviews

Average

Would highly recommend

Good easy way to find a selection of…

Love LeadsDoWork it's a big part of my …

FAQs

Other Top Projects in Boston

Customer Reviews

Are you a solar panel installer in Boston?