The common cost of Flat roof is £2500. Costs fluctuate based upon the materials and the firm chosen. The upper price range can be as high as £2875. The material costs are quite often about £625
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£21800
£16350
£10900
£5450
£0
| Labour cost | £1,750 | |
| Material cost | £625 | |
| Waste removal | £125 |
Requests for quotations in Anerley in December 2024
Requests for Flat roof quotations in Anerley in December 2024. 0% change from November 2024.
Requests for Flat roof quotations in London County in December 2024. 0% change from November 2024.
Anerley is a district within the south east of London inside the London Borough of Bromley. It's west of Bromley and it is 7 miles south south-east of Charing Cross. It's the former site of the Crystal Palace.
Anerley has never been its own independent entity, but always a general area. Before the closure and relocation of the Crystal Palace to Penge Place at the top of Sydenham Hill, Anerley was an empty part of Penge Common that didn't develop until the nineteenth century. In 1827, a Scottish silk manufacturer, William Sanderson, purchased land around the former Penge Common, and built the first home in the district. He named it 'Anerly', which is a Scottish word for 'solitary' or 'only', and the road then became known as Anerley Road in addition to the vicinity.
There are lots of transport links in Anerley, which includes 9 bus routes, two A roads, two rail stations and one London Overground station and aTram station at Birkbeck station. Transport for London had proposed the extension of Tramlink services from Harrington Road tram stop to the bus station on Crystal Palace Parade by means of Anerley Road, but Mayor Boris Johnson cancelled the £170m extension in November 2008.
Notable people that lived in Anerley consist of Thomas Crapper, who promoted the flush toilet, in his retirement; Walter de la Mare, renowned poet and author of ghost stories; and James Leavey, award-winning Punch magazine columnist.
Thomas Roof Restoration are proud to work on your property as if it were their own. Based in Canterbury, covering Kent, South East London and the home counties, we work to see the job finished to your satisfaction whilst keeping your budget in mind
Good communications, however, quote was too expensive and focussed on fibreglass and rubber roofs.
Welcome to Adequate Roof Care Ltd, your trusted choice for exceptional roofing services in Windsor, High Wycombe, Reading and surrounding areas. Founded in 2020, we have established ourselves as the region’s most reliable roofing service provider. ...
Very professional. They did a great job and completed the work on time. Would definitely recommend them.
Welcome to WG Roofing & Guttering Services. We are a family run business with over 15 years’ experience in the roofing and UPVC trade. At WG roofing we understand that reputation is built on quality and this is why we offer the very best mate...
very good
Excel Roofing are a friendly and professional roofing company, based in Luton and offer a quality roofing service. We serve all of Bedfordshire, Hertfordshire and Buckinghamshire.
Excellent.A company that really knows what it is doing and does it very well.
ALL OUR WORK COMES WITH A 15 YEAR GUARANTEE WITH WRITTEN QUOTE AND NO DEPOSIT UNTIL ALL WORK IS COMPLETED.VISIT OUR WEBSITE ON LONDONCOUNTIESROOFING.COM FOR INFORMATION ON ALL OUR ROOFING SERVICES.
Very good price, but one company is better price.
We are Experienced, trustworthy, reliable, & cost-effective. We have been involved in the roofing industry for over 15 years and have many happy clients. We provide an unparalleled service for all types of roofing work throughout Bromley Borough & t...
Same as before.
Did not really want to provide a rubber roof & quoted on a triple felt roof that we do not want.
Answer a few quick questions, so we can match you with local roofers who can help.
Get free, no-obligation local flat roof quotes from 4 verified roofers working in Anerley.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Most material warranties come from the waterproofing layer manufacturers, and can last between 5 and 20 years. If your roofing contractor is on the manufacturer’s installer list, it might cover their work. It’s important that you always read through all the information given to you about your warranty so you know exactly what is included.
You should inspect your roof twice a year, ideally after rain or snow, to see if it’s draining properly. Also in the Spring to check for damage that may of been caused over the winter months that will need to be put right before the next winter. Have an inspection carried out if you are unsure.
How Much Is A New Flat Roof
What is a home without a roof to keep out the elements? Being the first line of defence against intense sun, rain, wind and more, implies they require enough care and attention to keep them in a top condition. Therefore, whether you need a new flat roof or just to replace some tiles, you’d be interested in knowing how much it would cost you to get a new roof before you start making the necessary plans. Here, we’ll give you an idea on the cost of a new flat roof and how you can estimate yours based on your unique requirements.
The size of your roof as well as the material to be used are the two main determinants of any flat roof project’s cost. For instance, a four bedroom detached home’s slate roof will be more expensive than a felted flat roof for a small or standard garage. Generally, in the UK, the average cost for replacing a flat roof will range between £5000 to £6000. However, if you’re on a tight budget and looking for the cheapest possible option, you’ll get a felt flat roof only on a garage at about £1000 to £1500. Meanwhile if you want to replace the entire slate tiles of a large family home, the cost can jump up to a range of £11000 to £13000.
Other factors that plays a key role in the determination of a new flat roof’s cost includes the location, labour as well as materials. For instance, a new flat roof price is likely to be higher in London and the south east than the other regions of the country. Also, labour may cost you around £150 to £250 per worker on a daily basis.
How To Replace Flat Roof Felt
Also referred to as tar paper, roofing felt is installed underneath the roof’s shingles to help deny water access to your home. Installing the roofing felt in overlapping layers builds a water barrier in situations whereby the weather damages or blows away the shingles. Although the application of a roofing felt on a flat roof is relatively easier and safer than working on a peaked roof, it’s advisable to take enough care and precautions. If you lack proper training and experience for this task, we’d recommend you employ a reliable professional to guarantee the best results and save you from further headaches especially in cases whereby unfortunate errors are made. This step by step guide will give you a good insight into the flat roof felt replacement process.
• Take a measurement of the width and length of the roof.
• Calculate the square footage by multiplying the numbers.
• Multiply the square footage gotten by three (it’s advisable to install three layers of roofing felt to create a really strong weather barrier).
• Use a claw hammer to remove the existing roofing felt.
• Use utility knife to cut the new felt to fit the length of the roof.
• Place the first piece along the roof’s edge and use a hammer tacker to tack the felt in place with staples or galvanized nails and hammer.
• Put the staples or nails at every 6 inches along the side touching the roof’s edge as well as down the short sides.
• Repeat the same process for the second piece, laying it out beside the first row of felt.
• Cut a piece of felt to the appropriate length using a utility knife to begin the second layer of roofing felt, and cutting it in half, lengthwise.
• Apply construction adhesive along the first row using a trowel.
• Press the first piece for the second layer onto the adhesive. Repeat this process until the roof is covered with a second layer
• Apply construction adhesive over the second layer to install the third layer. Begin with a full piece of felt without cutting it in half.
• Overlap each piece by 2 inches until you’ve completely installed the third layer.
We can help you get more flat roof work with our qualified job leads and boost your business.
Join today