Commercial / Industrial Roofing in Spilsby

Obtain Commercial / Industrial Roofing Prices in Spilsby

Home > Roofing Projects > Commercial roofing > Spilsby

Commercial / Industrial Roofing in Spilsby

Looking for commercial roofing in Spilsby? Our commercial roof covering specialists in Spilsby are going to provide you the very best quotations for having commercial roofing installed or replaced.

Commercial rooftops could possibly be required for a number of reasons, particularly if the present roofing requires repair or it'll be attached to a brand new build.

There are numerous variables which will play a role in the look and planning of a new commercial roof and the expense will all be determined by the size and style you opt for.

Thermoplastic roofing is especially popular. This sort of roofing is made of a sturdy material with high temperature tolerance. The material is a favourite for commercial roofs as it's resistant against uv and chemical exposure. The roofing will last for more than two decades, with a great resistance for fire, punctures and high wind loads.

You could also think about EPDM roofing. The durability and flexibility of EPDM roofing tends to make it a popular material in the commercial roofing world. These types of roof material have the advantage of being easier to install, sustain and repair too, leading to their popularity.

If you want to install commercial roofing then make sure to do a comparison of quotations between vetted professionals in Spilsby. By doing this you can get the very best price and offer available for you in Spilsby.

Average Commercial roofing cost in Spilsby

The regular cost of Commercial roofing is £5000. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £5750. The material costs are generally approximately £1250

Average price per Commercial roofing job in 2024

Avg. price low

Avg. price low
£1,950

Avg. price

Avg. price
£3,350

Avg. price high

Avg. price high
£4,584

£4700

£3525

£2350

£1175

£0

Prices based on actual Commercial roofing costs for Spilsby, as reported by local LeadsDoWork members.

Commercial roofing installation cost in Spilsby 2024

Labour cost £3,500
Material cost £1,250
Waste removal £250
Time frame: 1-2 weeks

Commercial roofing searches in September 2024

Commercial roofing Projects in Spilsby in August 2024

196

Requests for quotations in Spilsby in August 2024

0

Requests for Commercial roofing quotations in Spilsby in August 2024. 0% change from July 2024.

0

Requests for Commercial roofing quotations in Lincolnshire in August 2024. 0% change from July 2024.

We recorded 196 requests for property improvement quotations in Spilsby. Of such price requests the volume of commercial roofing (type: commercial roofs, green rooftops, thermoplastic roofs etc...) was 0. Quotatis was able to match these clients with as many as four suitable professionals who had been available for work in Spilsby during those times.

Source: Numbers calculated based on the search volumes in major search engines

Commercial roofing searches in cities and towns near Spilsby August 2024

Spilsby

Spilsby is a market town, civil parish and electoral ward in the East Lindsey district of Lincolnshire, England. The town is adjacent to the main A16 trunk road, 33 miles (53 kilometres) eastern of the county town of Lincoln, 17 miles (27 kilometres) north-east of Boston and 13 miles (21 km) north-west of Skegness. It lies at the southern edge of the Lincolnshire Wolds as well as north of the Fenlands, as well as is bordered by breathtaking walking, nature gets and other places to see. The town has actually been a rural market community for greater than 700 years. It has actually transformed little bit in dimension considering that the start of the 19th century. The community centre includes a range of tiny supermarkets, financial institutions, standard newsagents, baker, butchers, jewellers and also clothes shops, together with hostelries, cafes and ethnic fast-food takeaways. At the centre of community is an open square or typical market area, where the 4 primary town roads emit. Markets take place on a Monday. As Spilsby lies within a mainly agricultural area, much of the marketplace produce contains in your area expanded veggies and meat. The population of the community was 2,336 in the 2001 census, boosting to 3,045 at the 2011 Census.

Looking for Commercial roofing in Spilsby?

Get free quotes from local roofers

Get free quotes

How it works

Tell us about your Commercial roofing project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Roofers in Spilsby

Get free, no-obligation quotes from 4 verified Roofers working in Spilsby.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How long does it take to fix a roofing sheet on a commercial property?

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

What is commercial roofing?

Commercial roofing simply refers to any roofing work, including installation and repair, that is done to commercial buildings. This might include office roofs, shop roofs or commercial unit roofs. Every building needs a roof to keep out the rain!

Since looks aren’t usually the first priority with commercial buildings, lots of commercial properties have flat roofs. These are often made from felt, EDPM rubber or fibreglass. Felt is the cheapest commercial roofing material, while fibreglass tends to be the most expensive. In felt roofs, roofers use an adhesive to stick roofing felt onto a frame. EDPM rubber roofs have a rubber membrane that is laid down and glued onto the roof and coated with a contact adhesive, while fibreglass uses a cut glass fibre mat that is pressed on before a resin and topcoat are applied.

Not all roofing companies will offer commercial roofing services, because generally the buildings tend to be bigger. Small companies won’t have enough tradespeople to work on a roof without making it very expensive for you. Commercial buildings also tend to need more scaffolding to make it safe for the professionals to work, so some smaller roofing companies won’t offer commercial services. Make sure you check a company’s website or social media if you’re looking for commercial roofing – on the Quotatis Directory, our roofers will show whether they do commercial roofing to make your search easier.

How much does it cost to replace a commercial flat roof?
If your commercial flat roof needs replacing, how much it costs will depend on how big the roof is and what you want it to be made from. Lots of commercial flat roofs are made from felt or asphalt, but people are also beginning to turn to materials like EDPM rubber and fibreglass. Flat roofs can last a long time, but if it’s been 20 years or more since you had it replaced or inspected, it might be time for a new one. If a roofer inspects it and finds lifting, flashing problems, sagging or lots of blisters, it’s probably time to replace your flat commercial roof. So how much does it cost to replace your commercial flat roof? The average cost is around £4,500, but it could be much less or much more. It depends on how big your roof is and what material you choose. Felt is the cheapest material you can use for your commercial flat roof, at around £40-70 per metre squared, while a lead bay roof will cost the most at £90-110 per square metre. EDPM rubber and fibreglass roofs are being used more and more because they’re so durable, and they will cost between £80 and £110 per square metre. It might be worth spending a little more upfront to get a stronger and longer-lasting commercial flat roof.

Placholder Image

Other Top Projects in Spilsby

Are you a roofer in Spilsby?

We can help you get more Commercial roofing work and boost your business.

Join today