Commercial / Industrial Roofing in Ely

Compare Commercial / Industrial Roofing Prices in Ely

Home > Roofing Projects > Commercial roofing > Ely

Commercial / Industrial Roofing in Ely

Searching for commercial roofing in Ely? Our commercial roofing professionals in Ely will be able to give you the top quotations for getting commercial roofing installed or replaced.

Commercial rooftops might be necessary for quite a few reasons, particularly if the present roofing is in need of repair or it'll be placed on a brand new build.

There are numerous factors which will contribute to the look and preparing of a new commercial roof top and the expense will all depend upon the size and style you opt for.

Thermoplastic roofing is particularly popular. This sort of roofing is made of a durable material with high temperature tolerance. The material is a favourite for commercial rooftops because it's resistant against ultra violet and chemical exposure. The roof structure lasts for over twenty years, having a excellent resistance for fire, punctures and high wind loads.

You can also contemplate EPDM roofing. The sturdiness and flexibility of EPDM roofing can make it a popular material in the commercial roofing world. These kinds of roofing materials have the advantage of being much easier to install, sustain and restore too, adding to their popularity.

If you'd like to install commercial roofing then make sure to review prices between vetted specialists in Ely. By doing this you can get the ideal cost and deal available for you in Ely.

Average Commercial roofing cost in Ely

The regular cost of Commercial roofing is £5000. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £5750. The material costs are generally approximately £1250

Average price per Commercial roofing job in 2024

Avg. price low

Avg. price low
£2,375

Avg. price

Avg. price
£9,000

Avg. price high

Avg. price high
£15,375

£15900

£11925

£7950

£3975

£0

Prices based on actual Commercial roofing costs for Ely, as reported by local LeadsDoWork members.

Commercial roofing installation cost in Ely 2024

Labour cost £3,500
Material cost £1,250
Waste removal £250
Time frame: 1-2 weeks

Commercial roofing searches in November 2024

Commercial roofing Projects in Ely in October 2024

776

Requests for quotations in Ely in October 2024

0

Requests for Commercial roofing quotations in Ely in October 2024. 0% change from September 2024.

0

Requests for Commercial roofing quotations in Cambridgeshire in October 2024. 0% change from September 2024.

We recorded 776 requests for house improvement quotes in Ely. Of these quote requests the amount of commercial roofing (type: commercial roofs, green rooftops, thermoplastic roofs etc...) was 0. Quotatis was able to match these clients with as many as four suitable professionals who were readily available for work within Ely at that time.

Source: Numbers calculated based on the search volumes in major search engines

Commercial roofing searches in cities and towns near Ely October 2024

Ely

Ely is a little city within Cambridgeshire, located in a 23-square mile clay island. With a tiny population of little more than 20,000 it's among the smallest cities in the UK. Ely keeps a lot of the buildings from the Norman period, with many houses holding this dated look. You can also find a range of new properties across the city and its suburbs too. For the home improvements you need in Ely, make sure to employ reliable contractors and get the top finish possible.

Looking for Commercial roofing in Ely?

Get free quotes from local roofers

Get free quotes

How it works

Tell us about your Commercial roofing project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Roofers in Ely

Get free, no-obligation quotes from 4 verified Roofers working in Ely.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

How to install commercial rubber roofing?

How you install commercial rubber roofing is similar to fitting it on a residential property, except that the area that’s covered is likely to be bigger. With commercial properties, you should always leave any maintenance and repair works to the professionals – whether you own or lease the property, you could invalidate any insurance if you try to install rubber roofing yourself. We’ll outline the steps roofers will take when installing rubber roofing on a commercial property.

Firstly, the installers will remove any existing coverings and clean and dry the surface thoroughly. This is vital in ensuring that the rubber will stick. They will then unwrap the EDPM rubber membrane and leave it to rest until it’s fully expanded. On a warm day this may take around half an hour.

Next, the roofers will work with half a sheet of rubber at a time and adhere it to the roof surface. They may use a water-based adhesive which they will spread onto the roof in sections, then roll the membrane onto the surface before moving onto the next section. If they’re using a bonded adhesive, they will apply it to both the roof and the rubber and leave it to dry until it’s tacky before extending the membrane.

Once the EDPM rubber is rolled out, the installers will brush the surface with a large broom to get rid of bubbles and provide a stronger bond. Then they will work of the edges, applying adhesive to roof and walls edges, sealing corners and creating watertight seals. They’ll also tidy up any excess membrane and seal all the trims.

As long as it’s installed correctly, your commercial rubber roofing should last you decades without any repairs needed. It’s always best to inspect your roof regularly to spot any damage before it becomes a bigger problem.

How much does it cost to replace a commercial flat roof?
If your commercial flat roof needs replacing, how much it costs will depend on how big the roof is and what you want it to be made from. Lots of commercial flat roofs are made from felt or asphalt, but people are also beginning to turn to materials like EDPM rubber and fibreglass. Flat roofs can last a long time, but if it’s been 20 years or more since you had it replaced or inspected, it might be time for a new one. If a roofer inspects it and finds lifting, flashing problems, sagging or lots of blisters, it’s probably time to replace your flat commercial roof. So how much does it cost to replace your commercial flat roof? The average cost is around £4,500, but it could be much less or much more. It depends on how big your roof is and what material you choose. Felt is the cheapest material you can use for your commercial flat roof, at around £40-70 per metre squared, while a lead bay roof will cost the most at £90-110 per square metre. EDPM rubber and fibreglass roofs are being used more and more because they’re so durable, and they will cost between £80 and £110 per square metre. It might be worth spending a little more upfront to get a stronger and longer-lasting commercial flat roof.

How long does it take to fix a roofing sheet on a commercial property?

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

Placholder Image

Other Top Projects in Ely

Are you a roofer in Ely?

We can help you get more Commercial roofing work and boost your business.

Join today