Stud Wall/Plasterboarding in Verwood

Compare Stud Wall/Plasterboarding Prices in Verwood

Home > Plastering & Ceilings Projects > Plasterboard dry lining > Verwood

Stud Wall/Plasterboarding in Verwood

Internal or partition walls can be relocated or knocked through in your property, which can transform the area layout and create a substantial open plan room design for a spacious living area or a kitchen diner. When relocating or knocking through interior walls, it is critical to understand both the kind of interior wall that it is, and whether or not it's a load bearing wall. Internal walls can be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to deciding whether a wall is load bearing or not, it is advisable to engage the services of a structural engineer if you are uncertain or are not able to view original plans for your property. Load bearing walls can be moved, but this is typically more expensive and involves constructing additional load bearing solution, such as steel lintels. Moving or knocking through internal walls will usually consist of demolition of the existing wall, rebuilding or restoring the new walls, replastering and moving electrics. It may also demand adjustments to the floor, as occasionally the floors between rooms will not be completely level, and knocking through interior walls can reveal this. Generally moving interior walls will not require planning permission, but you'll need to conform to building regulations for insulation and sound proofing. Consulting with a structural engineer will ensure that any internal wall changes that you plan on doing will keep your premises structurally sound.

Average Plasterboard dry lining cost in Verwood

The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5

Average price per Plasterboard dry lining job in 2024

Avg. price low

Avg. price low
£638

Avg. price

Avg. price
£850

Avg. price high

Avg. price high
£978

£1100

£825

£550

£275

£0

Prices based on actual Plasterboard dry lining costs for Verwood, as reported by local LeadsDoWork members.

Plasterboard dry lining installation cost in Verwood 2024

Labour cost £595
Material cost £213
Waste removal £43
Time frame: 1-2 days

Plasterboard dry lining searches in November 2024

Plasterboard dry lining Projects in Verwood in October 2024

470

Requests for quotations in Verwood in October 2024

0

Requests for Plasterboard dry lining quotations in Verwood in October 2024. 0% change from September 2024.

0

Requests for Plasterboard dry lining quotations in Dorset in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Plasterboard dry lining searches in cities and towns near Verwood October 2024

Verwood

The community of Verwood in the English county of Dorset is located 15 miles north of Bournemouth and 19 miles north of Poole. It is likewise a civil parish that consists of the community of Verwood and also the expanded village of Three Legged Cross. According to population estimates by Dorset Area Council in 2014, the community has a long-term population of around 15,170. It stands as Dorset's largest community that does not have an upper school. Records of the community from the 14th century suggest that its name suggests 'fair wood'. Verwood Pottery, developing the East Dorset pottery industry, flourished from very early times on the clay dirts with adequate firing materials. Before mechanisation, manufacturing methods continued to be the same as in Roman times: clay was beaten by foot, as opposed to mixed in a pug mill; an assistant with a pole or manage would certainly turn the wheel; the kilns worked by a wood fire. As a result, the ceramic sector gave fascination at first and also middle of the 20th century. Far from limited to a regional sales base, the products were offered across a significant section of the south of England, and also transported abroad. Instances of the pots made in Verwood can now be seen at the Verwood Heathland Heritage Centre, which is basically a museum of neighborhood background with a coffeehouse. Every Friday early morning, an area market stands in the Memorial Hall, marketing mainly in your area generated seasonal fruit and also vegetables, plants, blossoms as well as homemade cakes, jams and also crafts. Social and also recreation activities are supplied for via the town's 2 shopping center and also 'The Center', opened up in 2007, housing movie, theatre, and also show facilities. For every one of your residence upgrades, see to it to take advantage of credible professionals in Verwood to make sure of top quality.

Looking for Plasterboard dry lining in Verwood?

Get free quotes from local builders

Get free quotes

How it works

Tell us about your Plasterboard dry lining project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Builders in Verwood

Get free, no-obligation quotes from 4 verified Builders working in Verwood.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to dot and dab plasterboard?

How To Dot And Dab A Plasterboard

If you want a fast and simple way to achieve a smooth and sturdy wall which is decoration-ready, then dot and dab plasterboard is the way to go! It’s a relative simple process but can also be a bit challenging. Therefore, if you lack the necessary training or experience, hiring a professional would be a great step to protect your investment and guarantee the best results. Here, we’ll provide you with a deep insight into the plasterboard’s dot and dab procedures. Let’s have a look!

• At the thickness of the board with the adhesive, mark the ceiling and floor as well as the wall to indicate the centre of each board.

• Ensure the wall’s height is 15mm more than the plasterboard

• Make a mixture of the adhesive and achieve a thick consistency. Apply a consistent layer of the mixture around the wall’s perimeter, edge of the ceiling and any other openings with the use of a trowel.

• Select dabs that are about 250mm long and 50mm to 75mm wide and apply the adhesive in them. Make use of 3 vertical rows for individual boards. Also ensure to apply, at skirting level, a band of adhesive.

• Position the board’s reverse side against the dabs, and laying against the packers. Then make the board align with the ceiling and floor marks with the help of a straight edge.

• Raise the board till its tight against the ceiling with a board lifter. Once done, use the plasterboard to wedge the board into place before you remove the board lifter.

• Repeat the same process for the remaining parts of the room. Once completed, make sure the adhesive is set before you remove the boards.

How to plasterboard a wall?

How To Plasterboard A Wall

If you’re looking to plasterboard your wall, one of the essential things to have in mind is that the plasterboard must be hung horizontally and not vertically. Due to the way they’re manufactured, plasterboard sheets normally possess a “grain along the length. This implies that, it’s only when they’re firmly placed perpendicular against the wall that they’re able to achieve their maximum strength. Materials you’ll need to complete this task includes: Tape measure, stanley knife, pencil, spirit level, drill driver or screw gun, surform, drywall screws and handsaw. Now let’s have a look at the wall plasterboarding steps!

• To plasterboard a wall the first step to take is to place each board in such a way to make the edges the centre of the noggins and upright. Also, the the adjoining walls and door openings should fit closely to the edges.

• Work from the door opening to the ending wall. From the the stud’s edge to the noggin’s centre, use your tape measure to measure a cut board and as a rule to mark up.

• Place your spirit level on the marks and use the Stanley knife to run a line along the intended cut. Once done, turn the board on its edge and give a sharp push on the back to split.

• Cut the paper left with the knife after folding the split edge back on itself. This way, you should get a nice and clean edge.

• In its right position, place the board up against the studwork. Install the screws on the board’s edges where a noggin or upright can be seen.

• Mark lines down across the board at the stud’s centre.

• Cut the end boards to length.

• Install the remaining boards as mentioned above. While doing this, make sure the factory edges are together.

• Cut any board extending into an opening and finish the edges using a surform.

We’d recommend you hire the professional services of a plasterer for the best results especially if you lack the necessary training or experience. Plasterboarding a wall can be a tricky challenge and you’d save yourself some time, money and effort by getting it right on the first trial.

How much is plasterboard?

How Much Is Plasterboard?

Do you wish to install plasterboard in the nearest future? If yes, then you’d probably want to know the amount it’s going to cost. Here, we’ll give you a detailed plasterboarding prices breakdown to help you calculate an estimate for your project.

A plasterboarding project including the cost of both materials and labour with the use of a high quality panels is about £4 to £5 per panel. Therefore, if you wish to calculate on the basis of a standard room about 12x12ft would cost about £500 to £600. However, this price can fluctuate significantly depending on the professional as well as the quality of the materials you wish to incorporate in completing the project. We’d recommend that you hire the services of a professional with accreditation as he would provide you with a detailed quote with no hidden charges or costs. To give you a clearer idea, we’ve taken the time out to put together some estimated costs of employing the services of a seasoned professional plasterer to supply and plasterboard your home or office. Let’s take a look!

• A 6 x 12ft room with panels and plasterboard should have an average cost within the range of £250 to £400 and duration of one to two days.

• The individual cost of plasterboarding or drywalling a standard 12 x 12ft room should have an average cost within the range of £500 to £600 and duration of one to three days. These includes 60% for materials used (£330), 30% for tradespersons (£165) and the remaining 10% for waste removal (£55) to give a total cost of £550.

• A 12 x 24ft room with panels and plasterboard should have an average cost within the range of £1000 to £1200 and duration of three to six days.

What is plasterboard?

What Is Plasterboard?

The plasterboard is unarguably one of the most common building materials across the globe. Sometimes referred to as gypsum board, gyprock, drywall or wall board, the plasterboard is mostly incorporated for ceiling cladding and interior walls in several homes and offices in recent times. However, despite its global acceptability, it’s a very misunderstood building material.

The plasterboard is manufactured using a gypsum core with a heavy paper covering both sides of the sheet. The measurement of a standard plasterboard sheet is a length of 2.4 metres in and a width of 1.2 metres, with a thickness of about 13mm. The board usually have either a bevelled or a bit flat edge. The bevelled edge makes it easy for the installers to use a plaster to smooth out the surface after nailing the sheets to walls and ceilings as well as taping the edges.

The plasterboard comes in different types. Although various manufacturers provide a unique name for their products, but they’re all included in one of the following categories:

• Water Resistant Plasterboard - This type of plasterboard are best suited to be used in water areas like bathroom, laundry rooms and kitchens.

• Acoustic Plasterboard - Due to its sounding proofing qualities, this type of plasterboard is preferred to be used in home theatres or noisy areas.

• Flexible Plasterboard - This is to be incorporated on curvy surfaces.

• Fire Resistant Plasterboard - Just like the name implies, this type of plasterboard is best suited for use in high fire hazard areas.

If you’re about to kick start some small renovations around your house or office, using a plasterboard to clad your walls is a very simple and worthwhile task. However, if you want to do major renovations or need to apply plasterboard to your ceiling, the best option would be to leave it to a seasoned professional.

Placholder Image

Other Top Projects in Verwood

Are you a builder in Verwood?

We can help you get more Plasterboard dry lining work and boost your business.

Join today