Stud Wall/Plasterboarding in Dinas Powys

Obtain Stud Wall/Plasterboarding Prices in Dinas Powys

Home > Plastering & Ceilings Projects > Plasterboard dry lining > Dinas Powys

Stud Wall/Plasterboarding in Dinas Powys

Internal or partition walls can be relocated or knocked down in your house, which can transform the room design and establish a larger open plan room design for a big living space or a kitchen diner. When relocating or knocking through interior walls, it is critical to understand both the type of interior wall that it is, and whether it's a load bearing wall. Internal walls can be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to determining whether a wall is load bearing or not, it is advisable to engage the services of a structural engineer if you are not sure or are not able to view original plans for your premises. Load bearing walls can be moved, but this is generally more costly and involves constructing additional load bearing solution, for example steel lintels. Moving or knocking through internal walls will generally consist of demolition of the existing wall, reconstructing or repairing the new walls, replastering and moving electrics. It could additionally necessitate alterations to the floor, as occasionally the floors between rooms aren't entirely level, and knocking through interior walls can reveal this. Generally moving internal walls won't require planning permission, but you'll need to abide by building regulations for insulation and sound proofing. Consulting with a structural engineer will ensure that any interior wall changes that you plan on doing will keep your premises structurally sound.

Average Plasterboard dry lining cost in Dinas Powys

The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5

Average price per Plasterboard dry lining job in 2024

Avg. price low

Avg. price low
£638

Avg. price

Avg. price
£850

Avg. price high

Avg. price high
£978

£1100

£825

£550

£275

£0

Prices based on actual Plasterboard dry lining costs for Dinas Powys, as reported by local LeadsDoWork members.

Plasterboard dry lining installation cost in Dinas Powys 2024

Labour cost £595
Material cost £213
Waste removal £43
Time frame: 1-2 days

Plasterboard dry lining searches in November 2024

Plasterboard dry lining Projects in Dinas Powys in October 2024

558

Requests for quotations in Dinas Powys in October 2024

0

Requests for Plasterboard dry lining quotations in Dinas Powys in October 2024. 0% change from September 2024.

0

Requests for Plasterboard dry lining quotations in South Glamorgan in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Plasterboard dry lining searches in cities and towns near Dinas Powys October 2024

Dinas Powys

Dinas Powys is a large village as well as an area in the Vale of Glamorgan in South Wales which takes its name from the ancient Welsh for stronghold, (Dinas) as well as pagus,(Powys) the Latin word for pagan. The literal significance, for that reason, being, "Pagan Stronghold", describing Dinas Powys hillfort that dates from the Iron Age. The town is 5.6 miles (9.0 kilometres) south-west of the centre of Cardiff as well as comfortably positioned on the A4055 Cardiff to Barry main road. It is usually considered a pleasurable dorm town for Cardiff's commerce and market travelers because the city has expanded with prevalent development around the Cardiff Bay area. Regardless of the addition of a number of housing developments over the past fifty years, the old village centre of Dinas Powys still has a primarily unspoiled and almost rural feeling, retaining a big town common and a standard town centre full with a post office and also a variety of small independent shops, hostelries, restaurants and also area centers. Additionally there are stores, garages, small supermarkets, Pharmacy and a Vets on the major Cardiff Roadway and also a choice of stores on the Murch estate consisting of a post office. The Health and wellness Centre containing the medical professionals as well as Murch pharmacy transferred in April 2017 to the new Medical centre on top of Murch Road, on the site of the old St Cyres, Dinas Powys website. According to recent selecting rolls the population remains in the area of 8,800. This establishes the village as the 5th biggest settlement in the Vale of Glamorgan and also larger than lots of chartered communities in the UK.

Looking for Plasterboard dry lining in Dinas Powys?

Get free quotes from local builders

Get free quotes

Similar Customer Enquiries for Plasterboard dry lining in Dinas Powys

20 Nov

Interior work | Stud Walls

Penarth, Dinas Powys - CF64

Enquiry from: Anna B

Start Date: Immediate

Stud wall fitting, will need a door fitting also

Post a similar request >

13 Jun

Interior work | Stud Walls

Pontyclun - CF72

Enquiry from: Y

Start Date: Immediate

Cover slat wall system Are you the property owner: Tenant (with permission) Property Type: Commercial What level of service do you require: Plaster work only Time scale: Less than one month Pleas...

Post a similar request >

How it works

Tell us about your Plasterboard dry lining project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Builders in Dinas Powys

Get free, no-obligation quotes from 4 verified Builders working in Dinas Powys.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to plasterboard a brick wall?

How To Plasterboard A Brick Wall

Do you want to cover your brick wall with plasterboard? The key to success here is the preparation. You must ensure that brick wall is prepared well enough to receive the plasterboard. To get started, there’s the need to attach wood furring strips to the wall which serves as studs in a wood frame structure. This way, the plasterboard will be prevented from getting in touch with the brick. You can always hang pictures or any other forms of decoration in between the gap between the walls. Let’s have a look!

lAttach Furring Strips

• Get a 2 inch by 4 inch wood stud and apply a bead of construction adhesive.

• Using a masonry bit, drill a pilot hole through the wood stud’s base as well as the brick wall.

• Hit a 3 inch fluted nail through the hole using a sledgehammer

• Using a construction adhesive, bind a horizontal 2 inch by 3 inch stud to the upper edge of the wall.

• Using an adhesive, bind the length of a 2 inch by 3 inch stud on its wide side.

• Use a masonry drill to drill a hole on the wood stud and 1 1/2 inches into the brick wall.

• Hit a 3 inch fluted nail through the pilot hole.

lApply Plasterboard

• Hold a plasterboard sheet against the furring strips.

• Use plasterboard screw to hold the drywall sheets in place.

• Use fibreglass to cover the joints where the two plasterboard sheets meet.

• Use a thin layer of the joint compound on the tape. Once done, screw it using a 6 inch taping knife, then allow to dry overnight.

• Use a sandpaper to smooth the joint compound.

• Use a fresh coat of the joint compound to block the holes and joints. Once done, allow the compound to dry.

• Use a light sandpaper to smooth the final coat.

Plasterboarding a brick wall is a simple task but the preparation part must be done right to protect your investment. Therefore, we’d recommend you hire the services of a skilful professional, who can guarantee the best results especially if you lack enough training and experience to carry out a DIY project.

How to plasterboard a wall?

How To Plasterboard A Wall

If you’re looking to plasterboard your wall, one of the essential things to have in mind is that the plasterboard must be hung horizontally and not vertically. Due to the way they’re manufactured, plasterboard sheets normally possess a “grain along the length. This implies that, it’s only when they’re firmly placed perpendicular against the wall that they’re able to achieve their maximum strength. Materials you’ll need to complete this task includes: Tape measure, stanley knife, pencil, spirit level, drill driver or screw gun, surform, drywall screws and handsaw. Now let’s have a look at the wall plasterboarding steps!

• To plasterboard a wall the first step to take is to place each board in such a way to make the edges the centre of the noggins and upright. Also, the the adjoining walls and door openings should fit closely to the edges.

• Work from the door opening to the ending wall. From the the stud’s edge to the noggin’s centre, use your tape measure to measure a cut board and as a rule to mark up.

• Place your spirit level on the marks and use the Stanley knife to run a line along the intended cut. Once done, turn the board on its edge and give a sharp push on the back to split.

• Cut the paper left with the knife after folding the split edge back on itself. This way, you should get a nice and clean edge.

• In its right position, place the board up against the studwork. Install the screws on the board’s edges where a noggin or upright can be seen.

• Mark lines down across the board at the stud’s centre.

• Cut the end boards to length.

• Install the remaining boards as mentioned above. While doing this, make sure the factory edges are together.

• Cut any board extending into an opening and finish the edges using a surform.

We’d recommend you hire the professional services of a plasterer for the best results especially if you lack the necessary training or experience. Plasterboarding a wall can be a tricky challenge and you’d save yourself some time, money and effort by getting it right on the first trial.

What is plasterboard?

What Is Plasterboard?

The plasterboard is unarguably one of the most common building materials across the globe. Sometimes referred to as gypsum board, gyprock, drywall or wall board, the plasterboard is mostly incorporated for ceiling cladding and interior walls in several homes and offices in recent times. However, despite its global acceptability, it’s a very misunderstood building material.

The plasterboard is manufactured using a gypsum core with a heavy paper covering both sides of the sheet. The measurement of a standard plasterboard sheet is a length of 2.4 metres in and a width of 1.2 metres, with a thickness of about 13mm. The board usually have either a bevelled or a bit flat edge. The bevelled edge makes it easy for the installers to use a plaster to smooth out the surface after nailing the sheets to walls and ceilings as well as taping the edges.

The plasterboard comes in different types. Although various manufacturers provide a unique name for their products, but they’re all included in one of the following categories:

• Water Resistant Plasterboard - This type of plasterboard are best suited to be used in water areas like bathroom, laundry rooms and kitchens.

• Acoustic Plasterboard - Due to its sounding proofing qualities, this type of plasterboard is preferred to be used in home theatres or noisy areas.

• Flexible Plasterboard - This is to be incorporated on curvy surfaces.

• Fire Resistant Plasterboard - Just like the name implies, this type of plasterboard is best suited for use in high fire hazard areas.

If you’re about to kick start some small renovations around your house or office, using a plasterboard to clad your walls is a very simple and worthwhile task. However, if you want to do major renovations or need to apply plasterboard to your ceiling, the best option would be to leave it to a seasoned professional.

How much plasterboard do I need?

How Much Plasterboard Do I Need?

Although many people especially contractors have a tough time estimating the number of drywall or plasterboard needed to complete a project, it’s a rather simple task if all factors are taken into consideration. If you’re able to follow the same procedures taken by professionals to count dry wall sheets, you’ll be in the right direction. Let’s have a look at the procedures to follow!

lTake Square Footage Measurement

• Measure the square footage of the area where the plasterboard will be fitted.

• Multiply the height by the width of each wall or ceiling area.

• Add all quantities to obtain a total square-foot amount.

lCalculate Drywall Sheets

• To calculate the number of drywall or plasterboard sheet is very simple once you’ve gotten the total square footage.

• To get started, simply divide the total square footage of area by 32 (that’s if you are using a 4 by 8 sheets) or you can also make use of 48 to make the division (only if you’re making use of the 4 by 12 sheets).

• The answer you get after the division will give you the full number of plasterboard sheets that’s required to complete the project.

We’d recommend you include an extra 10 to 15 percent of whatever you calculate to take care of the possible odd cuts and wastages. This implies that if your total area is 1600 square feet while incorporating 4 by 8 sheets, simply divide 1600 by 32 which equals 50 sheets, now take 10% of 50 which equals 5, then add back the 5 extra to the 50 sheets earlier calculated to get 55 sheets. If you wish to estimate the cost, simply multiply the number of sheets gotten by the price per sheet. Do not forget to include delivery charges and local taxes.

Placholder Image

Other Top Projects in Dinas Powys

Are you a builder in Dinas Powys?

We can help you get more Plasterboard dry lining work and boost your business.

Join today