Stud Wall/Plasterboarding in Darlington

Find Stud Wall/Plasterboarding Prices in Darlington

Home > Plastering & Ceilings Projects > Plasterboard dry lining > Darlington

Stud Wall/Plasterboarding in Darlington

Internal or partition walls can be moved or knocked down in your property, which can modify the area design and create a substantial open plan room design for a big living area or a kitchen diner. When relocating or knocking through interior walls, it is vital to understand both the sort of interior wall that it is, and whether or not it's a load bearing wall. Internal walls might be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to deciding whether a wall is load bearing or not, it is advisable to engage the services of a structural engineer if you are unclear or are not able to view original plans for your premises. Load bearing walls can be moved, but this may also be more costly and involves adding additional load bearing solution, for example steel lintels. Moving or knocking through internal walls will often entail demolition of the existing wall, rebuilding or repairing the new walls, replastering and moving electrics. It may additionally necessitate alterations to the floor, as sometimes the floors between rooms are not entirely level, and knocking through internal walls can reveal this. Generally moving interior walls will not require planning permission, but you'll need to comply with building regulations for insulation and sound proofing. Consulting with a structural engineer will ensure that any interior wall changes that you intend on doing will keep your house structurally sound.

Average Plasterboard dry lining cost in Darlington

The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5

Average price per Plasterboard dry lining job in 2025

Avg. price low

Avg. price low
£638

Avg. price

Avg. price
£850

Avg. price high

Avg. price high
£978

£1100

£825

£550

£275

£0

Prices based on actual Plasterboard dry lining costs for Darlington, as reported by local LeadsDoWork members.

Plasterboard dry lining installation cost in Darlington 2025

Labour cost £595
Material cost £213
Waste removal £43
Time frame: 1-2 days

Plasterboard dry lining searches in January 2025

Plasterboard dry lining Projects in Darlington in December 2024

1,811

Requests for quotations in Darlington in December 2024

0

Requests for Plasterboard dry lining quotations in Darlington in December 2024. 0% change from November 2024.

0

Requests for Plasterboard dry lining quotations in County Durham in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Plasterboard dry lining searches in cities and towns near Darlington December 2024

Darlington

The market town of Darlington is situated in Durham towards the northeast of England around the River Skerne. Darlington features a populace over 97,000 and it is well known for having the world's first passenger railway. There has been some regeneration of the town, especially in the centre with a new shopping area and a total pedestrianised renovation. For your next household development make sure to work with trustworthy companies from Durham and take a look at prices.

Looking for Plasterboard dry lining in Darlington?

Get free quotes from local builders

Get free quotes

Local & reliable builders near me

Tell us about your plasterboard dry lining project

Answer a few quick questions, so we can match you with local builders who can help.

Find up to 4 builders in Darlington

Get free, no-obligation local plasterboard dry lining quotes from 4 verified builders working in Darlington.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How much is plasterboard?

How Much Is Plasterboard?

Do you wish to install plasterboard in the nearest future? If yes, then you’d probably want to know the amount it’s going to cost. Here, we’ll give you a detailed plasterboarding prices breakdown to help you calculate an estimate for your project.

A plasterboarding project including the cost of both materials and labour with the use of a high quality panels is about £4 to £5 per panel. Therefore, if you wish to calculate on the basis of a standard room about 12x12ft would cost about £500 to £600. However, this price can fluctuate significantly depending on the professional as well as the quality of the materials you wish to incorporate in completing the project. We’d recommend that you hire the services of a professional with accreditation as he would provide you with a detailed quote with no hidden charges or costs. To give you a clearer idea, we’ve taken the time out to put together some estimated costs of employing the services of a seasoned professional plasterer to supply and plasterboard your home or office. Let’s take a look!

• A 6 x 12ft room with panels and plasterboard should have an average cost within the range of £250 to £400 and duration of one to two days.

• The individual cost of plasterboarding or drywalling a standard 12 x 12ft room should have an average cost within the range of £500 to £600 and duration of one to three days. These includes 60% for materials used (£330), 30% for tradespersons (£165) and the remaining 10% for waste removal (£55) to give a total cost of £550.

• A 12 x 24ft room with panels and plasterboard should have an average cost within the range of £1000 to £1200 and duration of three to six days.

How to dot and dab plasterboard?

How To Dot And Dab A Plasterboard

If you want a fast and simple way to achieve a smooth and sturdy wall which is decoration-ready, then dot and dab plasterboard is the way to go! It’s a relative simple process but can also be a bit challenging. Therefore, if you lack the necessary training or experience, hiring a professional would be a great step to protect your investment and guarantee the best results. Here, we’ll provide you with a deep insight into the plasterboard’s dot and dab procedures. Let’s have a look!

• At the thickness of the board with the adhesive, mark the ceiling and floor as well as the wall to indicate the centre of each board.

• Ensure the wall’s height is 15mm more than the plasterboard

• Make a mixture of the adhesive and achieve a thick consistency. Apply a consistent layer of the mixture around the wall’s perimeter, edge of the ceiling and any other openings with the use of a trowel.

• Select dabs that are about 250mm long and 50mm to 75mm wide and apply the adhesive in them. Make use of 3 vertical rows for individual boards. Also ensure to apply, at skirting level, a band of adhesive.

• Position the board’s reverse side against the dabs, and laying against the packers. Then make the board align with the ceiling and floor marks with the help of a straight edge.

• Raise the board till its tight against the ceiling with a board lifter. Once done, use the plasterboard to wedge the board into place before you remove the board lifter.

• Repeat the same process for the remaining parts of the room. Once completed, make sure the adhesive is set before you remove the boards.

How to put up plasterboard?

How To Put Up Plasterboard

Putting up a plasterboard is a vital process when it comes to home renovations. However as daunting as it may seem, with a good guide and regular practice you can master the skill within a small period of time. If you lack proper training and experience, we’d recommend you hire a seasoned professional plasterer for help so as to get the best result and also avoid additional costs due to possible damages.

Putting up plasterboard is way quicker than wet plastering and also significantly reduces the drying time that can slow down your renovation plans. With a plasterboard, you can delve straight into the decorating stage and achieve a smooth finish. Below are the steps required to put up a plasterboard.

• The first step is cutting the plasterboard to shape which be one of the most challenging parts of the process. This is because you’ll need to fit the board around things such as plug sockets and window sills. As a result, this involves cutting complex shapes rather than just a simple straight line. To get this done, simply mark out the cut required with the use of a tape measure, combination square and spirit level for a better precision. Once done, you can then use a plasterboard pad saw to cut along the marked spots.

• After you made the required cuts, the next step is putting up the plasterboard. And depending on where the boards are going to be put, this could be a very challenging task. If you’re going to put the boards on the ceiling or somewhere very high up, you’d probably need an extra pair of hands for help. To get this done, use the appropriate screws to secure the boards in place if you’re installing them directly on studs. However, if you’d be fixing them onto bricks or blocks, a drywall adhesive is your best bet.

How to fit plasterboard?

How To Fit Plasterboard

If you’re planning to renovate your house, then here is a must-read guide! Fitting of plasterboard is a crucial step when it comes to renovation. If you’re bringing down an existing lath and plaster for an upgraded surface or adding a new wall, a plasterboard is required for your project to be a true success. If you’re a novice with no prior practice or experience, you can protect your investment by hiring the services of a professional plasterer to guarantee the best results, the first time. However, we’ve put together this guide to give you an insight on how the plasterboard fitting process is done.

To get started, you’ll need a power drill, hammer, plasterboard nails or screws, broad knife, utility knife, measurement tape, pencil, ladder as well as a joint tape.

Before proceeding, you need to identify the number of plasterboard sheets needed to commence the project by measuring the height and width of the wall as well as calculating the square footage. If you possess a stud timber wall, the steps below will get you the best results.

• Measure the walls and mark the plasterboard where you’ll make the cuts. Start with a full sheet and cut pieces down in such a way that would fit

• Score the front paper of the plasterboard with utility knife. Fold the sheet to get a clean cut through the board and make use of the knife to the remaining paper.

• Place the first sheet against the wall and use an offcut to prevent the plasterboard from touch the floor.

• Make the plasterboard rest snugly against the wall in position and screw it firmly on each stud. Once done, fasten it at all the sheets’ edges and in a line down the stud to make for a firm connection. Follow the same process for the remaining plasterboard sheet till the wall is fully covered.

Placholder Image

Other Top Projects in Darlington

Customer Reviews

Overall rating:


Darlington Plasterboard dry lining installers are rated 4.5 out of 5 based on 2 reviews of 14 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Plasterboard dry lining projects that have been connected with Plasterboard dry lining pros to help them. All Plasterboard dry lining contractors All Darlington Plasterboard dry lining contractors
Plasterboard dry lining Published: 18/07/2013 Plasterboard dry lining is a material used to cover interior walls in your home, which can then be decorated onto. This is an alternative to ... Read this article
Renovating a large 4 piece bathroom in Exeter Published: 12/01/2025 Transform your large 4-piece bathroom in Exeter with expert renovation services. Modernize your space with bespoke fittings and high-quality materials. Read this article
Apex roof replacement on concrete garage in Sutton Published: 12/01/2025 Replace the apex roof on a concrete garage in Sutton, ensuring a weatherproof solution with durable materials and updated wooden gable ends. Read this article

Are you a builder in Darlington?

We can help you get more plasterboard dry lining work with our qualified job leads and boost your business.

Join today