Heating | Smart Thermostats
London - N19
Enquiry from: Gabby S
Start Date: Immediate
Install hive instead of current thermostats
The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
Labour cost | £210 | |
Material cost | £75 | |
Waste removal | £15 |
Requests for quotations in Camden in October 2024
Requests for Heating control system quotations in Camden in October 2024. 0% change from September 2024.
Requests for Heating control system quotations in London County in October 2024. -32% change from September 2024.
The London Borough of Camden is a borough in north west London, and forms a part of Inner London. The southern reaches of Camden form part of central London. The borough was established in 1965 from the former area of the metropolitan boroughs of Hampstead, Holborn, and St Pancras, which had formed part of the County of London. The borough was named after Camden Town, which had gained its name from Charles Pratt, 1st Earl Camden in 1795. The transcribed diaries of William Copeland Astbury, just recently made accessible, describe Camden and the surrounding places in great detail from 1829 to 1848. The local authority is Camden London Borough Council.
Neighbouring places are the City of Westminster as well as the City of London to the south, Brent to the west, Barnet and Haringey to the north and Islington to the east. The borough covers a total area of about 8.4 square miles. You will find 162 English Heritage blue plaques in the borough of Camden representing the numerous diverse personalities that have lived there. The borough is also home to a wide number of attractions, for example the Bloomsbury Theatre, Camden Market, the Foundling Museum and Kenwood House.
All bus services are run by Transport for London, and buses serve every single suburb within the borough. 3 of the fourteen central London's railway terminals are positioned in the borough, which are Euston, St. Pancras International and King's Cross.
London - N19
Enquiry from: Gabby S
Start Date: Immediate
Install hive instead of current thermostats
London - NW5
Enquiry from: Kashim A
Start Date: Immediate
Install hive thermostat and replace the old thermostat
London - N7
Enquiry from: Liam M
Start Date: Immediate
Looking to have a hive installed i have a combi boiler (Logic Combi C24)
Bishop's Stortford - CM23
Enquiry from: Kash N
Start Date: Immediate
remove cosy receiver, install hive receiver for hot water & heating are you the property owner: owner of the property age of boiler: 6-10 years is your boiler: gas house type: detached how many bedroo...
London - N6
Enquiry from: David T
Start Date: Immediate
nest supply and installation. i have underfloor heating, controlled by a thermostat. the flat is a one bedroom duplex flat. the boiler is on *** floor, with a thermostat on the ground floor, and then ...
London - NW6
Enquiry from: Alexandra A
Start Date: Immediate
Inquire and update the latest prices and discounts
London - NW2
Enquiry from: Sharon K
Start Date: Immediate
Please give me more details and offers about heating control systems
London - N6
Enquiry from: Jacquie P
Start Date: Immediate
Re setting an uponor room control stat
London - EC1M
Enquiry from: Diane W
Start Date: Immediate
Boiler serviced last week but no heating coming on today. I need someone to check thermostat and timer is working properly. As boiler not burning on. Are you the property owner: Tenant (with per...
London - N1
Enquiry from: Emerald R
Start Date: Immediate
Water heater replacement Time scale: Immediate Please call to appoint
London - W9
Enquiry from: Carolina L
Start Date: Immediate
Move radiator to a different wall within the same room. A new radiator will be required.
London - NW6
Enquiry from: Cristian P
Start Date: 1 to 3 months
Are you the property owner: Tenant (with permission) New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: 10012, ...
London - NW2
Enquiry from: Mooni M
Start Date: 1 to 3 months
Are you the property owner: Relative of Owner New Boiler Type: Gas Age of boiler: 0-5 years Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: None
London - WC1H
Enquiry from: Tomas L
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 6-10 years Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: 336, 373, ...
London - NW2
Enquiry from: Kishor S
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - NW3
Enquiry from: Manuela R
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - N6
Enquiry from: Bitten H
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
London - N19
Enquiry from: Diane C
Start Date: Immediate
Homeowner Heating control system New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: None Supplied and i...
London - N1
Enquiry from: De V
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 0-5 years Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: None
Bishop's Stortford - CM23
Enquiry from: Rebecca Y
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Call to appoint
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Heating Engineers working in Camden.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
If you’re looking to acquire smart thermostats in your home, but wondering about its money saving qualities, then this is for you! Not only do smart thermostats add new impressive features to your home, but it can also save you both energy and money. According to many reports using a programmable thermostat can save you between the range of £130 to £150 on an annual basis. Now think about using a smart thermostat that makes it a lot more easier for you.
Wondering how smart thermostat save money? Simply set your smart thermostat one or two degrees lower or higher than the usual number. Once done, you’re likely to notice 1% to 3% reduction in your energy bills. And if you want even more, you simply increase the percentage to about 10 degrees to 15 degrees to cover the period you spend at work and watch as you save up to 10 percent of your energy bills.
Generally, a smart thermostats will save you money in two major ways. These includes:
• They Do All The Thinking For You
The smart thermostat watches your behaviour and study the time you’re at home and when you’re not as well as your preferred temperature at particular times in a day, and that’s why they are termed as “smart. they’ll automatically adjust the settings to ensure you get home to a perfect temperature.
• They Keep Tabs On Your Usage
You can always count on a two way communicating smart thermostat to watch your usage while also collecting the data and sharing it with you. It informs you of your energy usage rate as well as the estimated amount. Once you’ve been notified, you can manual adjustment or leave it to the thermostat to help manage your energy.
Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.
Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.
• Turn off the Nest Thermostat by switching the circuit breaker to the off position.
• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.
• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall
• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.
• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.
• Using the screws and screwdriver, attach the Nest base to the wall.
• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.
• Put the Nest display by lining up the connector on the display’s back.
• Turn on the power by switching the circuit breaker to the on position
• Connect your Nest thermostat to the WiFi network.
• Follow the on-screen guide and set the temperature.
• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.
In recent times, home and property owners are constantly looking for ways in which to enhance both energy efficiency and sustainability especially as the world draws closer and closer to energy-efficient technology. The Nest thermostat is a great example of this fact as its designed in such a way to save energy while also cutting heating and cooling costs. And an interesting fact is, you’re not limited to using just a single Nest thermostat in your home as multiple of the device can successfully run together to maintain a consistent level of temperature monitoring as well as energy efficiency. What’s more? You can add up to 20 Nest thermostat and 18 temperature sensors in a home.
It’s very unlikely that you’re going to need this many thermostats in your home, but if you’d like to add a second the process is quite straightforward. However, we’d recommend you employ the services of a seasoned professional especially if you lack the required training or experience to pull this off to save yourself some time and money.
To get started, simply download the associated Nest app to add Nest devices. Now let’s have a look at the processes involved in adding a second Nest thermostat to your home.
• Open the app.
• Go to the top left corner of the main screen and click on the menu button.
• Pick the location or home you’re adding the device to.
• Go to the top right corner and select the “settings.
• Once done, then click on the Add Product “Plus button.
Upon a successful addition of the second thermostat, the app will guide you through the initial set up steps. Google also offers a very helpful guide if you’re unfamiliar with the initial configuration.
The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.
The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:
• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.
• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place
When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.
A Few Dos:
• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.
• Do ensure that the position chosen is the centre of your home or a frequently used room.
• Do place the thermostat about 1 to 1.5 metres from floor.
• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.
A Few Don’ts:
• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,
• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.
• Don’t leave your thermostat too close to curtains or ornaments.
We can help you get more Heating control system work and boost your business.
Join today