Smart Thermostat in Aberaeron

Get Smart Thermostat Prices in Aberaeron

Home > Heating Projects > Heating control system > Aberaeron

Smart Thermostat in Aberaeron

Controlling the way your property is heated is amongst the better ways to reduce expensive energy expenses and leave you with much more disposable income at the end of each month. In fact, 60% of your power bill is from heating the house, so it's certainly an excellent place to start.

With the proper controls you'll be able to keep your house at a comfy temperature, while simultaneously not wasting additional money on fuel. You'll likewise be able to keep your house co2 emissions down too.

The good news is, heating control systems may be used with just about any central heating boiler, regardless of the type or even age. This suggests there's a saving to make should you just go out there and get it.

By installing a heating management system you will save between £70 and £150 year after year. Moreover there are a lot of CO2 emissions to be reduced too and you'll cut between 310kg and 630kg annually.

Also think about the temperature you have your thermostat set on. By simply switching it down only one degree, you can save as much as £75 a year and won't feel a difference in temperature either.

Average Heating control system cost in Aberaeron

The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75

Average price per Heating control system job in 2025

Avg. price low

Avg. price low
£225

Avg. price

Avg. price
£300

Avg. price high

Avg. price high
£345

£500

£375

£250

£125

£0

Prices based on actual Heating control system costs for Aberaeron, as reported by local LeadsDoWork members.

Heating control system installation cost in Aberaeron 2025

Labour cost £210
Material cost £75
Waste removal £15
Time frame: 1 day

Heating control system searches in January 2025

Heating control system Projects in Aberaeron in December 2024

121

Requests for quotations in Aberaeron in December 2024

0

Requests for Heating control system quotations in Aberaeron in December 2024. 0% change from November 2024.

2

Requests for Heating control system quotations in Dyfed in December 2024. -85% change from November 2024.

We recorded 121 requests for property improvement prices in Aberaeron. Of such price requests the amount of heating control systems was 0. Quotatis had been able to match these clients with as many as four suitable professionals who were available for work within Aberaeron back then.

Source: Numbers calculated based on the search volumes in major search engines

Heating control system searches in cities and towns near Aberaeron December 2024

6

Requests for quotations in Swansea in December 2024

1

Requests for quotations in Neath in December 2024

1

Requests for quotations in Port Talbot in December 2024

Aberaeron

Aberaeron is a seaside resort town in Ceredigion, Wales. It lies between Aberystwyth and Cardigan, and houses the headquarters of Ceredigion County Council. At the 2001 census, the population was 1422. The town derives its name from the Welsh which means 'mouth of the River Aeron'.

Rev. Alban Thomas Jones Gwynne planned and developed the town in 1805. He built a harbour that served as a port and supported the shipbuilding industry in the 19th century. A cluster of workmen's houses and a school were also built on the harbour's north side, but these have since been reclaimed by the sea.

Craftspeople lived in Aberaeron even before it became an operating port. In 1830, there were bootmakers, bakers and carpenters to name a few.

Aberaeron has unusual architecture. Edward Haycock constructed it around a principle square of Regency buildings grouped around the harbour. Some of the architecture has been used on British postage stamps.

A notable feature of the borough is Castell Cadwgan. It was a 12th-century ringwork fortification which was by the shore, but the sea has since claimed it. Some remains of the enclosure bank are still visible.

If you are looking for a replacement boiler for your property in Aberaeron, you should compare quotes from reputable companies to get the best price.

Looking for Heating control system in Aberaeron?

Get free quotes from local heating engineers

Get free quotes

Local & reliable heating engineers near me

Tell us about your heating control system project

Answer a few quick questions, so we can match you with local heating engineers who can help.

Find up to 4 heating engineers in Aberaeron

Get free, no-obligation local heating control system quotes from 4 verified heating engineers working in Aberaeron.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

how to install nest thermostat?

Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.

Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.

• Turn off the Nest Thermostat by switching the circuit breaker to the off position.

• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.

• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall

• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.

• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.

• Using the screws and screwdriver, attach the Nest base to the wall.

• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.

• Put the Nest display by lining up the connector on the display’s back.

• Turn on the power by switching the circuit breaker to the on position

• Connect your Nest thermostat to the WiFi network.

• Follow the on-screen guide and set the temperature.

• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.

how to install hive thermostat?

The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.

The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:

• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.

• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place

When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.

A Few Dos:

• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.

• Do ensure that the position chosen is the centre of your home or a frequently used room.

• Do place the thermostat about 1 to 1.5 metres from floor.

• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.

A Few Don’ts:

• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,

• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.

• Don’t leave your thermostat too close to curtains or ornaments.

can you use hive with an oil boiler?

Smart controls such as Hive are the next generation technology with more and more people now converting their houses into smart homes to control multiple devices in the homes remotely. Smart technology can be incorporated with several household devices such as security, lighting, entertainment and more. But what if there’s an oil boiler installed in your home, can you still connect your Hive with the your heating? Well, simply read on to find out.

The answer to this question is yes, most oil boilers are compatible with Hive and can substitute for either an existing conventional programmer or thermostat. The smart technology works to help derive more benefits from your heating system and they usually come with apps which can be used to control your home’s heating from anywhere with just your mobile device. Hive, however, cannot work to replace the functions of smart oil boiler heating controls to modulate your heating as they only work on an on or off basis. To make use of the modulating technology in an oil boiler, the cost of manufacture would be considerably higher while offering little advantage in efficiency for the home or property owner. Ultimately, this implies that you can’t incorporate smart technology to control the output in a similar way as a gas boiler, but there are still some ways to utilize smart technology with your oil boiler in such a way to boost your efficiency and lessen the energy bills.

Do you want to use your Hive with your home’s oil boiler? We’d advise you get in touch with an OFTEC qualified engineer if you wish to install Hive Active Heating on your oil boiler, as British Gas engineer do not offer this service.

what is a tado smart thermostat?

If you’re interested in deriving maximum benefits from your central heating system while also being a tech-enthusiast, a smart thermostat is just the perfect option as it allows you to control both your boiler and heating system via your mobile device. It also offers a plethora of features which enables you to heat your home more efficiently while also cutting your energy bills. Here, we’ll be taking a deeper look at the Tado smart thermostat (a user friendly smart thermostat with multiple impressive features such as a great design, self learning and LED interface).

A Tado smart thermostat is a relatively small piece of kit which is perfect for tech-lovers looking to get a first experience of the smart thermostats’ world. Although the appliance might feature just a basic design with a bit less advanced features in comparison with other thermostats like Hive, Nest and more, it however, still comes with some fantastic features which you can’t afford to miss out on. These includes geofencing, Smartphone or tablet control as well as heat scheduling. As you would have expected with any good smart thermostat, the ability to remotely control your heating is a top priority for several smart thermostats’ owners and Tado offers you this and more. Therefore, no more worries during the Winter months and wishing your home should be warm and perfect for your return. Aside this, a Tado smart thermostat also goes a long way to ensure efficient energy use and as a result, reducing the money paid on energy bills.

Overall, Tado is a nicely designed smart thermostat which is relatively easy to use and a perfect option for homeowners interested in having a taste of the world of smart thermostats or looking to replace their existing device.

Placholder Image

Other Top Projects in Aberaeron

Customer Reviews

Overall rating:


Aberaeron Heating control system installers are rated 0 out of 5 based on 0 reviews of 1 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Heating control system projects that have been connected with Heating control system pros to help them. All Heating control system contractors All Aberaeron Heating control system contractors

Are you a heating engineer in Aberaeron?

We can help you get more heating control system work with our qualified job leads and boost your business.

Join today