- How to build a shed base out of paving slabs
- Mix sand and cement together to make mortar or use a pre-mixed one
- Use a trowel to lay mortar for 1 slab at a time on the sub-base and lift a damp-sided slab onto the mortar, using a piece of timber and club hammer to tap the slab into position carefully. Continue to lay the first row of slabs
- Make equally-sized spacers in all the joints in the slabs to ensure they’re the same size, checking it’s level as you go along
- Next lay slabs along the two adjacent outer edges, filling in the central area row by row
- Leave the mortar to set according to the instructions or for at least 48 hours before filling in the joints with mortar or paving grout
- Building a shed base from concrete
- Create a wooden frame around your shed base area (also called formwork) to stop the concrete from spreading
- Mix pre-mixed concrete with water or use 1 part cement to 5 parts ballast
- Wet the sub-base using a watering can with a rose on the end
- Pour the concrete onto the framed base starting in one corner
- Push the blade of a shovel up and down in the edges of the concrete to get rid of air bubbles
- Use a rake to spread the concrete, leaving it around 18mm higher than the top of the frame. Work in sections of around 1-1.m2
- Compact the concrete using a straight piece of timber that’s longer than the width of the base. Move the timber along the site, hitting it along at about half of its thickness at a time until the surface is evenly ridged
- Remove excess concrete and level the surface by sliding the timber back and forwards from the edge that you started. Fill in any depressions and repeat until even
- Run an edging trowel along the frame to round off exposed edges of the concrete and prevent chipping
- Cover the concrete with a plastic sheet raised on wooden supports to allow slow drying. Weigh it down with bricks
- Once the concrete is set, you can install your shed and remove the wooden frame with a crowbar
Walsingham
Walsingham is a town in North Norfolk, England, famous for its religious shrines in honour of the Virgin Mary. It also contains the damages of 2 middle ages monastic houses. The civil parish, including Little Walsingham as well as Great Walsingham, along with the depopulated middle ages village of Egmere (grid referral TF 897 374), has a location of 18.98 kilometres ². At the 2011 census, it had a population of 819. Walsingham is a major centre of Pilgrimage. In 1061, according to the Walsingham legend, a Saxon noblewoman, Richeldis de Faverches, dreamt of the Virgin Mary in which she was instructed to build a reproduction of your house of the Holy Household in Nazareth in honour of the Annunciation. Her family name does not appear in the Domesday Book. When it was developed, the Holy House in Walsingham was panelled with wood and consisted of a wood sculpture of an enthroned Virgin Mary with the kid Jesus seated on her lap. Among its antiques was a phial of the Virgin's milk. Walsingham became one of northern Europe's excellent places of pilgrimage and continued to be so via a lot of the Middle Ages.