How to build a shed base on uneven ground?

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out. Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible. Build a timber frame to size. Measure out 4 rows of 3 blocks to create good weight distribution and lay in place. Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat. Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level. Nail your timber shed base to the timber planks to create a sturdy base for your shed. If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

How to dismantle a shed?

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task. Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed. Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass. Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this. Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly. Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls. Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others. Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

How to felt a shed roof?

Whether you want to felt a new shed roof or you’re re-felting your existing shed roof, it’s simple when you know how. Read our quick guide to see how easy it is. Remove any existing fascia boards Remove the fascia boards and the old felt if you’re re-felting. Measure the shed roof Measure the roof, taking into account that you should leave around 50mm for overlaps at the eaves and 75mm at the gable ends. You’ll probably need 3 pieces of felt, but some smaller sheds only need 2. Apply felt to the roof Once you’ve cut the felt to size, apply the each piece to the roof, pulling it tight. Then nail along the length of the roof at 100mm intervals. For nails at the bottom edge, they can be wider – around 300mm. If you’re adding a piece of felt in the middle of the shed along the apex, fix it using adhesive, then nail it at the lower edge at 50mm intervals. Tidy up the overhangs Fold down the felt at each overhang and nail it securely. Cut a slit in the overhang at the apex using a pen knife, then fold that down and nail at 100mm intervals along the gable. If you like, you can add fascia boards to keep the shed looking neat. Use wood nails to secure them and then trim away any excess felt. That’s it. It sounds scary, but it won’t take you long to felt your shed roof as long as you follow instructions carefully.

Garden Sheds in Reading

Get Garden Sheds Prices in Reading

Garden Sheds in Reading

Garden sheds are an essential aspect of any practical garden space. They can offer storage for bulky garden tools, as well as for other tools. A larger sized shed might even offer enough space for plant potting or a general workshop. Alternatively, a big shed could be used as an indoor sitting area. Garden sheds come in a huge selection of sizes and can be specified to your precise needs, giving you total control over the amount and position of windows, type, size and location of door, and design of roof. Garden sheds typically come in one of three materials. Wooden sheds are the traditional design and can be integrated well into any garden creating a natural look, especially if the wood used for the shed is matched to adjacent fences. Wooden sheds are still extremely popular, although they will require maintenance by retreating or staining the wood to preserve the life of the shed. Garden sheds are also constructed from metal, which is very resilient and therefore great for storage of tools and other equipment. Metal sheds also require minimal maintenance. The final material for garden sheds is plastic, which in modern examples is a lot more resilient than might be expected. When considering a garden shed, it's crucial to make sure that you select one that will fit in your garden space. Garden sheds will need to be sited on a flat area, and will need a base to be built as a foundation. This base could be made from either concrete, paving, gravel or a floating timber base, but will need to be the right size for your shed and capable of supporting the weight of your shed when loaded.

Average Garden shed cost in Reading

The typical cost of Garden shed is £600. Costs vary based on the materials and the organisation selected. The upper price range can be as high as £690. The material costs are typically around £150

Average price per Garden shed job in 2025

Avg. price low	Avg. price low £1,700
Avg. price	Avg. price £2,375
Avg. price high	Avg. price high £3,030

£3200

£2400

£1600

£800

£0

Prices based on actual Garden shed costs for Reading, as reported by local LeadsDoWork members.

Garden shed installation cost in Reading 2025

	Labour cost	£420
	Material cost	£150
	Waste removal	£30

Time frame: 1-2 days

Garden shed searches in April 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Garden shed Projects in Reading in March 2025

6,263

Requests for quotations in Reading in March 2025

0

Requests for Garden shed quotations in Reading in March 2025. 0% change from February 2025.

0

Requests for Garden shed quotations in Berkshire in March 2025. 0% change from February 2025.

Source: Numbers calculated based on the search volumes in major search engines

Garden shed searches in cities and towns near Reading March 2025

Garden shed near you

Choose locations

Towns and Cities near Reading Other locations within South East

Reading

The Berkshire town of Reading boasts a population of more than 145,000 and is also the largest part of the Reading/Wokingham urban area. The town is known as a major business centre and hosts a number of British companies, in addition to being a leading retail region. With the town's modern buzz it's important to keep your home up-to-date to maintain property value, so work with reliable companies in Reading for your next project.

Looking for Garden shed in Reading?

Get free quotes from local carpenters

Get free quotes

Garden shed pros in Reading

Mitchell Landscaping have been established for 10 years, offering quality advice and services in landscaping, Gardening and Fencing. We pride ourselves in offering a prompt, efficient service and are always conscious of our customers needs. I alw...

Latest review

Edna B., PO7

Garden | Sheds in Waterlooville

Very knowledgeable in all aspects of garden landscaping. Very approachable manner and my Shed now has new felt roof a...

Surbiton landscaping and building services in business since 1999 very professional run, family Business that takes pride in their work

Latest review

Brenda F., KT4

Garden | Sheds in Worcester Park

Start Date: Immediate

Homeowner Shed enquiry Provision of new shed on prepared concrete foundations. Shed size 14x8 Supplied and installed Please contact to appoint

Post a similar request >

Local & reliable carpenters near me

Tell us about your garden shed project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Reading

Get free, no-obligation local garden shed quotes from 4 verified carpenters working in Reading.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

If you spend time in your shed, whether you use it as a summer house or an office, you’ll probably want a bit of insulation in there for when it starts to get chilly. There are different ways to insulate a shed, and some aren’t expensive at all. You just need to decide what the best way for you is. Bubble wrap If you don’t spend too much time in your shed, bubble wrap is an easy and cheap way to insulate your shed. Simply attach bubble wrap strips to the framing of the shed to create an air gap, then screw or nail a sheet of MDF over the top. Fibreglass wool Fibreglass wool is a good option if you want to insulate your shed further. Make sure you use safety equipment to protect your eyes, nose, mouth and hands when you’re handling it. Tack a breathable membrane to the inner walls of the shed, then place the fibreglass wool on top. Add a sheet of MDF or wood board, ensuring all the fibreglass is covered. Insulating shed windows and doors You'll often feel draughts through shed windows and doors, and these are easy to block up. You can use foam filler or liquid wool along the edges of the windows and gaps in the door frame. Let it dry out after you’ve applied it then cut off any excess. Insulate the floor If you’re building a new shed, you could fit some underfloor insulation to the grid of the shed base – it could help reduce up to 40% of heat lost through the shed floor. But if your shed’s already built, you can line the floor with a breathable membrane then lay a rug or piece of carpet down. The membrane underneath stops any damp or rot forming, so it’s best not to lay a rug straight down on the shed floor.

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out.

Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible.
Build a timber frame to size.
Measure out 4 rows of 3 blocks to create good weight distribution and lay in place.
Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat.
Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level.
Nail your timber shed base to the timber planks to create a sturdy base for your shed.

If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task.

Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed.
Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass.
Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this.
Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly.
Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls.
Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others.

Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

Whether you want to felt a new shed roof or you’re re-felting your existing shed roof, it’s simple when you know how. Read our quick guide to see how easy it is.

Remove any existing fascia boards Remove the fascia boards and the old felt if you’re re-felting.
Measure the shed roof Measure the roof, taking into account that you should leave around 50mm for overlaps at the eaves and 75mm at the gable ends. You’ll probably need 3 pieces of felt, but some smaller sheds only need 2.
Apply felt to the roof Once you’ve cut the felt to size, apply the each piece to the roof, pulling it tight. Then nail along the length of the roof at 100mm intervals. For nails at the bottom edge, they can be wider – around 300mm. If you’re adding a piece of felt in the middle of the shed along the apex, fix it using adhesive, then nail it at the lower edge at 50mm intervals.
Tidy up the overhangs Fold down the felt at each overhang and nail it securely. Cut a slit in the overhang at the apex using a pen knife, then fold that down and nail at 100mm intervals along the gable. If you like, you can add fascia boards to keep the shed looking neat. Use wood nails to secure them and then trim away any excess felt.

That’s it. It sounds scary, but it won’t take you long to felt your shed roof as long as you follow instructions carefully.

Customer Reviews

Overall rating:

Reading Garden shed installers are rated 4.5 out of 5 based on 27 reviews of 164 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Garden shed projects that have been connected with Garden shed pros to help them. All Garden shed contractors All Reading Garden shed contractors

Need more help?

Safe removal of an asbestos garden shed in Galashiels Published: 02/12/2024 Expert removal and disposal of a small asbestos garden shed in Galashiels, ensuring safety and compliance with regulations. Read this article

Lawn care, shrub pruning, and shed maintenance in Bolton Published: 07/12/2024 Garden maintenance in Lostock, Bolton, including lawn care, weed clearance, shrub pruning, tree work, planting, and pond installation. Perfect for a small detached home garden. Read this article

Urgent re felting of a sloped shed roof in Fakenham Published: 04/12/2024 Professional re-felting of a sloped shed roof in Fakenham to stop water leakage and restore weatherproofing. Read this article

Are you a carpenter in Reading?

We can help you get more garden shed work with our qualified job leads and boost your business.

Join today

Garden Sheds in Reading

Get Garden Sheds Prices in Reading

Garden Sheds in Reading

Average Garden shed cost in Reading

Average price per Garden shed job in 2025

Garden shed installation cost in Reading 2025

Garden shed searches in April 2025

Garden shed Projects in Reading in March 2025

6,263

0

0

Garden shed searches in cities and towns near Reading March 2025

Garden shed near you

Reading

Looking for Garden shed in Reading?

Get free quotes from local carpenters

Garden shed pros in Reading

JM Fencing and Landscaping

Latest review

Edna B., PO7

Garden | Sheds in Waterlooville

Surbiton Landscaping

Latest review

Brenda F., KT4

Garden | Sheds in Worcester Park

Similar Customer Enquiries for Garden shed in Reading

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Garden | Sheds

Local & reliable carpenters near me

Tell us about your garden shed project

Find up to 4 carpenters in Reading

Hire with confidence

Our reviews

Average

Would highly recommend

Good easy way to find a selection of…

Love LeadsDoWork it's a big part of my …

FAQs

Other Top Projects in Reading

Need more help?

Are you a carpenter in Reading?