How to dismantle a shed?

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task. Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed. Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass. Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this. Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly. Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls. Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others. Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

How to build a shed base on uneven ground?

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out. Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible. Build a timber frame to size. Measure out 4 rows of 3 blocks to create good weight distribution and lay in place. Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat. Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level. Nail your timber shed base to the timber planks to create a sturdy base for your shed. If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

Garden Sheds in Huntly

Discover Garden Sheds Prices in Huntly

Garden Sheds in Huntly

Garden sheds are a vital component of any useful garden space. They offer storage for large garden tools, as well as for other tools. A sizeable garden shed could even offer enough space for plant potting or a general workshop. Additionally, a large shed could be used as an inside sitting area. Garden sheds are available in a large variety of sizes and can be specified to your exact requirements, providing you complete control over the amount and position of windows, type, size and location of door, and style of roof. Garden sheds usually come in one of three materials. Wooden sheds are the classic style and can be integrated well into any garden creating a natural look, especially if the wood used for the shed is matched to adjoining fences. Wooden sheds remain very popular, although they will require maintenance by retreating or staining the wood to protect the life of the shed. Garden sheds are also constructed from metal, which is very tough and therefore great for storage of tools and other equipment. Metal sheds also require hardly any maintenance. The final material for garden sheds is plastic, which in modern examples is much more resilient than might be expected. When considering a garden shed, it's critical to ensure that you choose one that will fit in your garden space. Garden sheds will need to be sited on a flat area, and will need a base to be built as a foundation. This base could be produced from either concrete, paving, gravel or a floating timber base, but will have to be the right size for your shed and able to support the weight of your shed when loaded.

Average Garden shed cost in Huntly

The typical cost of Garden shed is £600. Costs vary based on the materials and the organisation selected. The upper price range can be as high as £690. The material costs are typically around £150

Average price per Garden shed job in 2025

Avg. price low	Avg. price low £450
Avg. price	Avg. price £600
Avg. price high	Avg. price high £690

£800

£600

£400

£200

£0

Prices based on actual Garden shed costs for Huntly, as reported by local LeadsDoWork members.

Garden shed installation cost in Huntly 2025

	Labour cost	£420
	Material cost	£150
	Waste removal	£30

Time frame: 1-2 days

Garden shed searches in April 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Garden shed Projects in Huntly in March 2025

205

Requests for quotations in Huntly in March 2025

0

Requests for Garden shed quotations in Huntly in March 2025. 0% change from February 2025.

0

Requests for Garden shed quotations in Aberdeenshire in March 2025. 0% change from February 2025.

Source: Numbers calculated based on the search volumes in major search engines

Garden shed searches in cities and towns near Huntly March 2025

Garden shed near you

Choose locations

Towns and Cities near Huntly Other locations within Scotland

Huntly

Huntly is a town in Aberdeenshire, Scotland, formerly referred to as Milton of Strathbogie or simply Strathbogie. It had a population of 4,460 in 2004 and is the site of Huntly Castle. Its adjoining settlements include Keith and Rothiemay. Both Huntly and also the bordering area of Gordon are named for a town and also family members that originated in the Border country. Huntly is the historic home of the Gordon Highlanders regiment which commonly recruited throughout the North-East of Scotland. Huntly has a primary school (Gordon Primary) and also a secondary school (The Gordon Schools) beside Huntly Castle. There is an energetic cultural organisation called Deveron Projects. It is the house of the Deans bakers, which create shortbread biscuits. In November 2007, Deans of Huntly opened their brand-new visitor centre. There is additionally a falconry centre simply outside the community which does flying display screens in their visitor centre during the season between April and October.

Looking for Garden shed in Huntly?

Get free quotes from local carpenters

Base for 10 x 12 shed and erect shed

Post a similar request >

Local & reliable carpenters near me

Tell us about your garden shed project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Huntly

Get free, no-obligation local garden shed quotes from 4 verified carpenters working in Huntly.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

If you spend time in your shed, whether you use it as a summer house or an office, you’ll probably want a bit of insulation in there for when it starts to get chilly. There are different ways to insulate a shed, and some aren’t expensive at all. You just need to decide what the best way for you is. Bubble wrap If you don’t spend too much time in your shed, bubble wrap is an easy and cheap way to insulate your shed. Simply attach bubble wrap strips to the framing of the shed to create an air gap, then screw or nail a sheet of MDF over the top. Fibreglass wool Fibreglass wool is a good option if you want to insulate your shed further. Make sure you use safety equipment to protect your eyes, nose, mouth and hands when you’re handling it. Tack a breathable membrane to the inner walls of the shed, then place the fibreglass wool on top. Add a sheet of MDF or wood board, ensuring all the fibreglass is covered. Insulating shed windows and doors You'll often feel draughts through shed windows and doors, and these are easy to block up. You can use foam filler or liquid wool along the edges of the windows and gaps in the door frame. Let it dry out after you’ve applied it then cut off any excess. Insulate the floor If you’re building a new shed, you could fit some underfloor insulation to the grid of the shed base – it could help reduce up to 40% of heat lost through the shed floor. But if your shed’s already built, you can line the floor with a breathable membrane then lay a rug or piece of carpet down. The membrane underneath stops any damp or rot forming, so it’s best not to lay a rug straight down on the shed floor.

Yes, it is possible to insulate a shed. You might want to do this if you’re planning on working in it during the winter. A professional will be able to help you find an insulated shed or advise you on how to insulate a shed that you already have. Always seek professional advise first before attempting to do this yourself!

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task.

Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed.
Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass.
Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this.
Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly.
Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls.
Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others.

Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out.

Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible.
Build a timber frame to size.
Measure out 4 rows of 3 blocks to create good weight distribution and lay in place.
Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat.
Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level.
Nail your timber shed base to the timber planks to create a sturdy base for your shed.

If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

Other Top Projects in Huntly

Customer Reviews

Overall rating:

Huntly Garden shed installers are rated 4.2 out of 5 based on 2 reviews of 11 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Garden shed projects that have been connected with Garden shed pros to help them. All Garden shed contractors All Huntly Garden shed contractors

Need more help?

Safe removal of an asbestos garden shed in Galashiels Published: 02/12/2024 Expert removal and disposal of a small asbestos garden shed in Galashiels, ensuring safety and compliance with regulations. Read this article

Lawn care, shrub pruning, and shed maintenance in Bolton Published: 07/12/2024 Garden maintenance in Lostock, Bolton, including lawn care, weed clearance, shrub pruning, tree work, planting, and pond installation. Perfect for a small detached home garden. Read this article

Urgent re felting of a sloped shed roof in Fakenham Published: 04/12/2024 Professional re-felting of a sloped shed roof in Fakenham to stop water leakage and restore weatherproofing. Read this article

Are you a carpenter in Huntly?

We can help you get more garden shed work with our qualified job leads and boost your business.

Join today