How to dismantle a shed?

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task. Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed. Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass. Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this. Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly. Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls. Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others. Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

How to build a shed base on uneven ground?

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out. Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible. Build a timber frame to size. Measure out 4 rows of 3 blocks to create good weight distribution and lay in place. Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat. Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level. Nail your timber shed base to the timber planks to create a sturdy base for your shed. If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

Garden Sheds in Consett

Compare Garden Sheds Prices in Consett

Garden Sheds in Consett

Garden sheds are a significant element of any practical garden space. They can offer storage for cumbersome garden tools, as well as for other equipment. A large shed might even provide enough room for plant potting or a general workshop. Additionally, a sizeable shed could be utilised as an inside sitting area. Garden sheds are available in an enormous selection of sizes and can be specified to your precise needs, giving you complete control over the amount and placement of windows, type, size and location of door, and design of roof. Garden sheds usually come in one of three materials. Wooden sheds are the traditional style and can be integrated well into any garden creating a natural look, particularly if the wood used for the shed is matched to adjacent fences. Wooden sheds remain extremely popular, although they will need maintenance by retreating or staining the wood to protect the lifespan of the shed. Garden sheds are also manufactured from metal, which is very durable and therefore ideal for storage of tools and other equipment. Metal sheds also require minimal maintenance. The final material for garden sheds is plastic, which in modern examples is much more durable than might be expected. When considering a garden shed, it's essential to make certain you pick one that will fit in your garden space. Garden sheds will need to be placed on a flat area, and will need a base to be built as a foundation. This base could be made from either concrete, paving, gravel or a floating wooden base, but will need to be the right size for your shed and able to support the weight of your shed when loaded.

Average Garden shed cost in Consett

The typical cost of Garden shed is £600. Costs vary based on the materials and the organisation selected. The upper price range can be as high as £690. The material costs are typically around £150

Average price per Garden shed job in 2025

Avg. price low	Avg. price low £450
Avg. price	Avg. price £600
Avg. price high	Avg. price high £690

£800

£600

£400

£200

£0

Prices based on actual Garden shed costs for Consett, as reported by local LeadsDoWork members.

Garden shed installation cost in Consett 2025

	Labour cost	£420
	Material cost	£150
	Waste removal	£30

Time frame: 1-2 days

Garden shed searches in April 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Garden shed Projects in Consett in March 2025

635

Requests for quotations in Consett in March 2025

0

Requests for Garden shed quotations in Consett in March 2025. 0% change from February 2025.

0

Requests for Garden shed quotations in County Durham in March 2025. 0% change from February 2025.

Source: Numbers calculated based on the search volumes in major search engines

Garden shed searches in cities and towns near Consett March 2025

Garden shed near you

Choose locations

Towns and Cities near Consett Other locations within Northern Ireland

Consett

Consett is seen as a town inside the northwest of County Durham, England, roughly 14 miles (23 km) southwest of Newcastle upon Tyne. It is home to 27,397.

Looking for Garden shed in Consett?

Get free quotes from local carpenters

Old shed dismantled/removed and replaced with an Apex style shed. Please could the quote include the removal of some bricks and other garden waste. Many thanks Home Owner Call To Appoint

Post a similar request >

Local & reliable carpenters near me

Tell us about your garden shed project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Consett

Get free, no-obligation local garden shed quotes from 4 verified carpenters working in Consett.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

It can seem daunting to dismantle a shed when you want to get a new one or just get rid of it for good. Every shed is different and is likely to have been put together in a different way, but there are some general rules that you can follow to make dismantling a shed a simple task.

Remove fascias and trims Unscrew or prise off the screws and nails fixing the trims and fascias to your shed.
Take off doors and remove windows Unscrew hinges from doors and take them off. Remove all metalwork once the door is off. If you’ve got frames on your windows, unscrew these, and remove the panes. Be extra careful if your windows are made of glass.
Take off the roof Prise off the tacks from the roofing felt and take the felt off – you can’t reuse it, so you’ll need to throw it away. Unscrew the screws on the roof boards and slide them off the shed’s frame – you might need a friend to help you do this.
Take out the roof brace (optional) If your roof has a brace, unscrew the brackets that hold it to the side of the shed. Remember not to lean on anything once you’ve taken the brace off as the walls might be wobbly.
Unscrew the frame from the floor Remove all the screws that are holding the shed to the base, remembering not to lean on the walls.
Unscrew the frame corners Starting at the corner of the front gable, remove the screws where the panels meet. Once a panel is free, lift it carefully out of the way so you can carry on with the others.

Tidy up all your tools and debris, clearing the area to make it safe, and you’re done!

Try to put your shed in open space, away from trees, bushes and other buildings. This will help to protect it from falling branches and sap. It will also mean that you can access all sides of the shed for repair and maintenance purposes. Make sure you take a look at garden shed planning rules before you pick a final spot for your shed.

Yes, your shed does need a base. This is to give it a solid, level foundation. Open soil will not help with the longevity of the shed itself or the contents within. The best materials to use to make your shed base are concrete, natural stone or wood.

Building a shed base on uneven ground can be as easy as digging out a sub-base and checking that it’s level. You can dig down until the soil is light brown and rather compact, then work out where the ground is uneven and move soil around to compensate. Add a weed-blocking membrane down then put plastic grids in to act as your shed base or continue to make a sub-base for paving slabs or concrete. However, you could also build a timber shed base on uneven ground using concrete blocks to level it out.

Mark out the area and dig the top layer of soil, trying to get the ground as flat as possible.
Build a timber frame to size.
Measure out 4 rows of 3 blocks to create good weight distribution and lay in place.
Underneath each block, dig around 50mm wider than the blocks and about 150mm deep. Fill the hole with pea gravel until it’s flat.
Place timber planks along the rows of blocks and see how level it is. Add or remove blocks where necessary. If it’s only a small difference, use shingle underneath the timber until it’s level.
Nail your timber shed base to the timber planks to create a sturdy base for your shed.

If you’ve got any questions about building a shed base on uneven ground, it’s best leaving it to the pros. Get in touch with a range of builders who will be able to offer you a quote.

Other Top Projects in Consett

Customer Reviews

Overall rating:

Consett Garden shed installers are rated 4.6 out of 5 based on 4 reviews of 26 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Garden shed projects that have been connected with Garden shed pros to help them. All Garden shed contractors All Consett Garden shed contractors

Are you a carpenter in Consett?

We can help you get more garden shed work with our qualified job leads and boost your business.

Join today