Wooden Garage Door in Augher

Is your garage door a bit old and outdated? Are you planning to make some renovations? Or perhaps you just want a newer and more stylish garage door, that’s safer and easier to operate, installed. Fitting a garage door can be a bit tricky but it’s not as difficult as you might think. If you’re without proper training or experience, it’s advisable to get in touch with a reliable professional for help in order to guarantee the best results while also saving you both time and money. This guide offers you step by step instructions to assist you in the installation of a new door on our garage.

To get started, the obvious first step is to remove the old garage door. Carefully go through the manufacturer’s instructions to achieve this. Here, you’d basically have to unlatch the door, take apart the door’s panel and unscrew the tracks.

lMeasure, Fit The Hinges & Handles

• Take a measurement of the area in which the door will be fitted

• From the top of opening to ceiling should include a space of about 10 to 12.

• For the length of the garage, you should have the door’s height with about 18 or more space.

• Once done, attach stops to the sides of the opening

• Lay out the bottom piece of the door and include the weather stripping (if you deem fit) using the sawhorses.

lPut The Bottom Piece In Position

• Fit the bottom piece into door frame using a level

• Hit nails partway into each jamb

• Bend the nails slight to secure their position.

• Assemble the vertical, curved and horizontal pieces of the track using the manufacturer’s instruction

lFit The Remaining Panels

• Put the second panel on the first panel

• Use a hammer to hit nails into it

• Fit the hinges.

• Repeat the process for the number of panels required and achor individual piece into the door jamb.

lInstall Rollers

• Fit the rollers in the section’s supports

• Put the rollers in the assembled track and make sure they’re not pressed to tightly against the track to prevent friction.

lSecure Tracks & Fit The Springs

• Fit the curved and horizontal pieces

• Assemble the springs following the manufacturer’s instructions

• Ensure that the tracks are level and parallel by lifting the door to about half length

• Lift the door to cover the distance left and fit the springs to the pulley system

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

This is one of the most important factors to consider when considering the replacement of your old garage door. However, the replacement cost of a garage door relies on a number of factors such as the type of the preferred garage door, the size of the area in which the door will be installed and lots more. To get a more accurate estimate of the replacement cost you also have to consider the cost of removing the old garage door and the mechanism, the price of disposing the old garage door from the premise, the cost of installing a new sub frame and a new door panel, cost of the new operating mechanism and modern locking installation as well as the cost of purchasing and installing the new garage door. Here, we are only going to look at the purchase and installation cost of the new asset.

Today, there are a wide range of garage doors to choose from such as sectional, rollers, up and down, side sliding ( round the corner) and side hinged. They also come with varying materials which plays a significant role in the cost of the item such as steel, timber, aluminium, PVC and more. Furthermore, several garage doors include the option of being controlled electronically.

Generally, garage doors will cost between £300 to £5000, and include a price with the range of £150 to £1000 for the ones that can be operated electronically. With that in mind, the remaining cost would be that of the professional installer and that should be between £150 to £250 a person per day. For the labour, you can expect the installation of your new garage door to be completed within 3 to 6 hours (although an electric or specialist door may take longer installation time than the conventional or manual ones).

When you think about installing an electric garage door, one thing that naturally comes to mind is that purchasing and fitting of an electric garage door would be an expensive luxury. Having a garage door controlled by a remote control will probably cost too much, right? Well, contrary to many beliefs, the average cost of an electric garage door in the UK isn’t as expensive or pricey as you would have earlier imagined it to be. Of course, the price of your new electric garage door depends on a wide variety of factors such as the type of garage you possess, its aperture, construction as well as the type of electric garage door you seek.

Electric garage door aren’t that expensive considering the protection and convenience they provide, making them a viable option that should be considered for your garage. In the UK, a steel up-and-over single garage door price ranges around £700 to £900 plus £150 to £250 installation fee. Whereas, a costly single timber, trackless overlap door can cost as much as £4,200 to £5000 with about £400 to £700 installation price. A double garage door will usually cost double the price to purchase with just a little increase in the cost of the fittings.

The convenience provided in using an electric garage door is one of the main reasons why most people would prefer fitting it in their house. Just the thought of arriving home and driving through the wall of your garage with just a click of a button and without having to leave the comfort of your vehicle can be very appealing. And also with a click of a button you can keep your garage safe and secure from any potential danger. At the end of the day, the convenience and other benefits that comes with an electric garage door largely outweighs the price involved.