Block Paving in Lybster

Find Block Paving Prices in Lybster

Home > Paving & Driveways Projects > Block paving > Lybster

Block Paving in Lybster

Block paving can look great as a driveway. It is an elegant and functional answer to your driveway and will give your home great kerb appeal. Whether you want a classic herringbone design or something a little different, there are many block paving options and materials accessible to you. The bricks found in block paving are made of clay commonly, but some are made of different composite materials. One of the main advantages to block paving is that if some of the bricks get damaged over time, they can certainly be replaced. It also means that it is easier to perform work under the top of paving without leaving a mark. The most frequent pattern that driveway companies lay is the herringbone pattern because it has the strongest interlock, which makes it a great choice for driveways. The tradesperson creates the herringbone design by placing the blocks at 45 degrees or 90 degrees to the perpendicular. Both types of herringbone pattern create a stylish and interesting look for your driveway that can make your home look fantastic to buyers. Complete our online form to get in touch with up to 4 driveway companies who can give you a quote for a block-paved driveway.

Average Block paving cost in Lybster

The typical cost for a block paving project is about £4,000. For smaller areas of paving, or if you live in a cheaper area of the country, expect to pay approximately £3,000, but for larger areas or within the London area, costs may be as much as £4,600-£5,000.

Average price per Block paving job in 2024

Avg. price low

Avg. price low
£3,000

Avg. price

Avg. price
£4,000

Avg. price high

Avg. price high
£4,600

£4700

£3525

£2350

£1175

£0

Prices based on actual Block paving costs for Lybster, as reported by local LeadsDoWork members.

Block paving installation cost in Lybster 2024

Labour cost £2,800
Material cost £1,000
Waste removal £200
Time frame: 1-2 days

Block paving searches in November 2024

Block paving Projects in Lybster in October 2024

0

Requests for quotations in Lybster in October 2024

0

Requests for Block paving quotations in Lybster in October 2024. 0% change from September 2024.

0

Requests for Block paving quotations in Caithness in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Block paving searches in cities and towns near Lybster October 2024

Lybster

Lybster is a town on the eastern coastline of Caithness in northern Scotland. It was once a big herring fishing port, yet has actually decreased in the last few years, due to problems in the industry. The Waterlines heritage museum lies in Lybster Harbour and also gives info on the background as well as geology of Lybster. A small number of crab angling boats likewise operate from Lybster Harbour. Lybster lies on the eleventh area of the John O'Groats Trail, a long-distance walking path from Inverness to John O'Groats.

Looking for Block paving in Lybster?

Get free quotes from local driveway installers

Get free quotes

How it works

Tell us about your Block paving project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Driveway Installers in Lybster

Get free, no-obligation quotes from 4 verified Driveway Installers working in Lybster.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

When's the best time to get driveway work done?

Driveway work is usually done in the warmer half of the year. This is partly to avoid bad weather. If you want to get ahead and avoid waiting for a contractor to be free, you should try getting in touch with a professional in the early spring so a date can be booked for install as soon as practically possible.

how to lay block paving?

How To Lay Block Paving

Do you wish to know how to install block paving? We’ve got you covered! Here, you’ll find a useful step by step guide that’ll provide you with all the necessary information to lay a wide range of block paving products available in the market today. You must, however, note that the installation of block paving can be a tricky affair and should not be attempted unless you have undergone a proper training or have a good experience in the field. If otherwise, we’d advise you to leave the task for a reliable block laying professional to guarantee the best results and also avoid making costly mistakes.

lDesign

• Draw up a design to perfectly suits your needs.

• Decide on the type of block as well as colour.

lExcavation

• Use a mini excavator or a JCB ( depending on the size of the job) to excavate the driveway.

• Identify and mark out the area to be excavated.

• Dug out the area until you reach a suitable level

• Ensure that the proposed finish level is 150mm underneath the damp proof course in any of the adjoining building’s brick.

lEdge Restraints

• Build a 100mm depth-thick concrete foundation with the help of a concrete mixer, 1 part cement and 6 parts ballast.

• Position the kerb unit on top of the level with a string line and spirit level.

• Use a trowel and rubber mallet to mortar the kerb unit to the foundation.

• Haunch the back of the kerb units in such a way that the concrete reach half way up the kerb’s rear.

lSubbase

• Put the crushed concrete in the edge restraints and ensure it’s at the desired level of 50mm.

• Use a vibrating plate to compact and level

lScreeding

• Apply a layer of sharp sand (to 50mm depth) and campact it using a vibrating plate.

• Apply second layer of sharp sand (to 20mm depth) on top of the first layer.

• Level the second layer to the correct falls.

lInstallation Of Paving

• Lay the block paving starting from the bottom of a slope.

• Ensure the blocks are placed at about 10mm to 15mm above the required finish level.

• Make sure the blocks used are between 3-5 packs as you proceed with your desired pattern. You may need to cut smaller block pieces to fill smaller gaps.

lFinishing Touches

• Clear out the area to ensure no debris is left on the blocks.

• Put kiln dried sand and brush across the whole of the area, ensuring the sands falls between the blocks’ joints.

• Compact the drive with the vibrating plate.

• Brush more kiln dried sand over the area and compact again

• Repeat the process until the joints are full of sand.

What materials can I use to surface my driveway?

The most commonly used driveway surfacing materials are gravel, asphalt, concrete and paving - which can be block, slabbed or patten imprinted. Take a look at our product information pages to help you decide which one to use and which one will look best for your driveway.

how much to block pave a drive?

One thing you should know about block paving a drive is that it can be very expensive depending on a number of factors such as the materials to be incorporated, block paving pattern, labour cost as well as the size of the drive in question. However, before you get started it’s always a good idea to obtain multiple quotes to compare the prices and select the most reasonable quote. Here, we’ve provided a breakdown of the block paving cost to ensure that you’ll not get ripped off.

There are three main types of block paving which includes clay blocks, concrete blocks as well as natural stone. If you were to go for complex block paving patterns and extras such as drainage solutions and edging, you may have to pay a significantly higher price. The size of your drive is also a major determinant of your block paving cost. What’s more? The materials you need as well as the contractors you select will all play a key role in the final cost of block paving your drive.

The material cost for the three types of block paving includes: Clay block £70 to £100 per m2, concrete blocks £20 to £60 per m2 and natural stone £50 to £105 per m2. To calculate your total material cost, you’ll need to determine the size of your drive.

The cost of labour for installing block paving is usually within the range of £50 to £100 per square metre. In certain cases, you may also have some waste removal needs. If you’re going to hire a specialist that’ll take a day or two of labour to get the job done, it’ll cost about £150 to £200 per day.

Other additional block paving costs include: hardcore £300, blocks and edgings £1,700, sharp sand £250. kiln-dried sand £250 and skip hire £500.

Placholder Image

Other Top Projects in Lybster

Are you a driveway installer in Lybster?

We can help you get more Block paving work and boost your business.

Join today