Sewer Clearing in Warwick

Do you notice your sink is taking ages to drain or perhaps you’re perceiving a funny smell oozing from it? You don’t have to panic as this is most definitely a blockage. Unblocking your drain requires just a little effort and chances are, you might not need to reach out to a professional. This blockage may be in your home’s internal or external drains but so far the the drain is within your property, it’s entirely your responsibility to make sure that they are well maintained and repaired (if the need arises).

Generally, outside drain problems are more likely to be harder to fix when compared to your average blocked sink. But it isn’t impossible should you have the relevant tools as well as knowledge. In this post, we’re going to consider a safe and effective approach to unblock a drain outside. Let’s take a look!

1. Pull the cover off the drain. This may require the use of a flat head screwdriver to remove the drain’s cover. If that isn’t working, you can try tying a rope around the cover to give you a good coverage
2. Identify the blockage. This is usually messy, but you simply have to do it if you wish to save some money. Simply reach down to remove as many of the blockage that you can reach as possible. This will make it easier for you to remove the rest with a drain rod
3. Use the drain rod. Simply put the drain rod inside and apply pressure. You’ll have to twist the rod in a clockwise direction to get into the blockage. Depending on how big or stubborn the drain is, it may take a while to get through it.

Did you just arrive home after spending some time away? Immediately you turn the door knob and walk in, you perceive an unpleasant sulfuric odour. The questions that arises are many, you simply don’t know whether its your sewer line or perhaps something else. But one thing you know is, an air that smells that bad shouldn’t be ignored. And that’s totally right! A gassy smell in your home or property is always a sign that something is wrong and should never be overlooked until you’ve been able to get a better information since you may make a critical judgement error. Hence, it’s important to always educate oneself first in order to know the best thing to do after smelling gas.

When it comes to sewer gas, it possesses a sulfuric odour just like natural gas. However unlike natural gas, sewer gas smells a bit more unpleasant - more like an egg that’s rotten and less like a skunk. This is usually as a result of a back up of sulfides, methane, ammonia as well as other inorganic compounds. When in small quantity ( as it is in most homes), sewer gas is quite harmless even though the smell isn’t something you’d like to live with or want any of your visitors to be welcomed with. However, this smell can be dangerous when it comes in high doses such as in a deep sewage tunnel.

Most sewer issues come from a number of locations which includes the p-traps, unconnected pipes, damaged line, damage vent, cracked seal as well as foundation cracks. Although little doses of sewer gas lead to health problems, it isn’t an excuse to overlook the problem. Call in a specialist and while at it, you can also schedule a plumbing inspection every year.

If you feel your drains are sluggish or perhaps you’re hearing some strange sounds coming from them when you carry out tasks like flushing your toilet, then it’s highly likely that you have tree roots in your sewer line. If left unattended, this may lead to a real problem which will definitely cost a lot of money to fix. Therefore, it’s always smart to take care of this issue before it gets out of hands. In this guide, we’re going to take you through some of the procedures you can implement to get rid of tree roots from your sewer line. Let’s take a look!

• Through the use of rock salt. Rock salt should not be mistaken for table salt or coarse sea salt. These are what people throw at icy side walks and can be gotten at any local hardware store. It can be used for the removal of small tree root. To do this, simply flush some amount of rock salt down your toilet about 1/2 pound at a go. Upon flushing down the last batch, do not turn on the water for at least 12 hours. This will allow the rock salt time to sit in the pipes and make the environment totally harsh to the tree roots.
• Through the use of a foaming root killer. Another effective way to remove a small tree root from sewer pipes is by using an herbicide which doesn’t only kills root but also prevents them from growing back due to the fact that it leaves behind a residue that tree roots don’t like. This can be gotten at a local hardware or home and garden store. To use this, you simply have to follow the instructions on the label.

If you are not sure or if these methods don't help then getting a professional to fix the problem is your next step.

One major problem several home and property owners in the UK and across the globe would rather prefer to avoid is blocked sewer pipes or drains. These blockages can spring up when you least expect and if left untreated, can result in water leakages from your sewer pipes which is capable of damaging your home or business facility. In extreme cases with severe blockages, it can lead to burst pipes which will be even more expensive to repair. If you’re looking for safe and effective ways to clear a blocked sewer pipe, here are some of the primary options that are available to you.

• Boiling water. If you want a quick and easy fix of your blocked sewer pipe, then this is for you. Simply pour some quantity of boiling water into the drain. In several cases, this will cause the particles causing the blockage to dissolve or loosen without having to resort to more drastic measures. However, it’s advisable to only use this method on either metal or ceramic pipes. Use hot and not boiling water on PVC pipes to prevent heat from loosing its joints.
• DIY Natural Cleaner. To use this method, simple create a DIY cleaner by incorporating bicarb soda (baking soda) and white vinegar. Pour the baking soda into the sewer pipe and follow it with the vinegar. Once done, cover the sewer pipe to ensure the mixture does not bubble out of the pipe. In some cases, you may need to repeat the process a number of times to make sure that the blockage is properly removed. After completion, simply flush your sewer pipes down with hot water.
• Plunger. This is a very common option that home owners use in clearing their blocked drains. Firstly, cover all overflow spouts before you start to plunge to get a strong seal. The strong up and down pressure produced by the plunger can go a long way to clear any blockages to ensure your pipes flow uninterruptedly again.