Sewer Clearing in Southwark

Before you start digging, you should know sewer lines are required to be buried within certain specifications and it’s your responsibility to find out what these specifications are. If you’re thinking about the appropriate depth of sewer line, then you’ve come to the right place! In this post we’re going to consider how deep a main sewer line should be buried underground.

First and foremost, you should understand that sewer lines are simply the intestinal systems of a house or property. Their primary function is to totally remove waste water and other waste matter from your drains, toilet, shower, dishwasher as well as the exterior faucets. With this in mind, we can then move to our main concern which is the sewer line depth. In a world that’s perfect, you’d be allowed to to just dig your home’s sewer line deep enough to cover it with a thin layer of sod. However, if you happen to reside in an environment with deep running cold, this inclement weather may just freeze up your waste right in the pipe due to the fact that it’s placed too close to the surface where there’s not enough warmth. This could also extend to other harsh weather conditions such as heavy wind and hurricanes which are able to tear out ground deep down and even more so, if it were to pull up trees that are close by with deep roots. Hence, the need to get the appropriate depth of sewer lines right.

Sewer lines depth can vary greatly - they can be as shallow as 12 to 30 and can be as deep as 6+ feet. This is often determined by the climate.

Depending on the size and location of the blockage, a blocked drain may be fixed by simply removing the build-up. This can be done either by using drain cleaner or physically removing the blockage. If the blockage is very serious or located within the pipes themselves, you will need to contact a plumber.

If you feel your drains are sluggish or perhaps you’re hearing some strange sounds coming from them when you carry out tasks like flushing your toilet, then it’s highly likely that you have tree roots in your sewer line. If left unattended, this may lead to a real problem which will definitely cost a lot of money to fix. Therefore, it’s always smart to take care of this issue before it gets out of hands. In this guide, we’re going to take you through some of the procedures you can implement to get rid of tree roots from your sewer line. Let’s take a look!

• Through the use of rock salt. Rock salt should not be mistaken for table salt or coarse sea salt. These are what people throw at icy side walks and can be gotten at any local hardware store. It can be used for the removal of small tree root. To do this, simply flush some amount of rock salt down your toilet about 1/2 pound at a go. Upon flushing down the last batch, do not turn on the water for at least 12 hours. This will allow the rock salt time to sit in the pipes and make the environment totally harsh to the tree roots.
• Through the use of a foaming root killer. Another effective way to remove a small tree root from sewer pipes is by using an herbicide which doesn’t only kills root but also prevents them from growing back due to the fact that it leaves behind a residue that tree roots don’t like. This can be gotten at a local hardware or home and garden store. To use this, you simply have to follow the instructions on the label.

If you are not sure or if these methods don't help then getting a professional to fix the problem is your next step.

A clogged sewer line, when left untreated, can lead to a wide range of serious problems. If the issues arises from a toilet or kitchen sink pipe, then it’s highly likely that it just might be a clogged drain. However, if every flush results in a build up of sewage in your home, then the problem is likely to be in the main sewer line. If you’re looking for ways in which you can unclog your main sewer line without a snake, then you’ve come to the right place. In this post, we’re going to show you just how to go about it. Let’s take a look!

1. Boiling water. If you want a quick and easy fix of your blocked sewer pipe, then this is for you. Simply pour some quantity of boiling water into the drain. In several cases, this will cause the particles causing the blockage to dissolve or loosen without having to resort to more drastic measures. However, it’s advisable to only use this method on either metal or ceramic pipes. Use hot and not boiling water on PVC pipes to prevent heat from loosing its joints.
2. DIY Natural Cleaner. To use this method, simple create a DIY cleaner by incorporating bicarb soda (baking soda) and white vinegar. Pour the baking soda into the sewer pipe and follow it with the vinegar. Once done, cover the sewer pipe to ensure the mixture does not bubble out of the pipe. In some cases, you may need to repeat the process a number of times to make sure that the blockage is properly removed. After completion, simply flush your sewer pipes down with hot water.
3. Plunger. This is a very common option that home owners use in clearing their blocked drains. Firstly, cover all overflow spouts before you start to plunge to get a strong seal. The strong up and down pressure produced by the plunger can go a long way to clear any blockages to ensure your pipes flow uninterruptedly again.