Sewer Clearing in Gullane

Depending on the size and location of the blockage, a blocked drain may be fixed by simply removing the build-up. This can be done either by using drain cleaner or physically removing the blockage. If the blockage is very serious or located within the pipes themselves, you will need to contact a plumber.

Do you notice your sink is taking ages to drain or perhaps you’re perceiving a funny smell oozing from it? You don’t have to panic as this is most definitely a blockage. Unblocking your drain requires just a little effort and chances are, you might not need to reach out to a professional. This blockage may be in your home’s internal or external drains but so far the the drain is within your property, it’s entirely your responsibility to make sure that they are well maintained and repaired (if the need arises).

Generally, outside drain problems are more likely to be harder to fix when compared to your average blocked sink. But it isn’t impossible should you have the relevant tools as well as knowledge. In this post, we’re going to consider a safe and effective approach to unblock a drain outside. Let’s take a look!

1. Pull the cover off the drain. This may require the use of a flat head screwdriver to remove the drain’s cover. If that isn’t working, you can try tying a rope around the cover to give you a good coverage
2. Identify the blockage. This is usually messy, but you simply have to do it if you wish to save some money. Simply reach down to remove as many of the blockage that you can reach as possible. This will make it easier for you to remove the rest with a drain rod
3. Use the drain rod. Simply put the drain rod inside and apply pressure. You’ll have to twist the rod in a clockwise direction to get into the blockage. Depending on how big or stubborn the drain is, it may take a while to get through it.

Do you think your outside drain is blocked? If yes, then you should have it treated as soon as possible and most especially by a professional who can guarantee the best outcome. When you fail to unblock your drain when due, there is no limit to the damage that can be caused. These includes water leakages which can damage your home or business facility. And in critical situations, it can as well result in pipe burst which will definitely cost you a lot more money to fix when compared to taking a quick action to unclog the outside drain blockages. If you’re thinking about hiring a professional, then you’d probably want to know how much its going to cost. In this post, we’re going to look at the cost of clearing an outside drain and the possible influencing factors.

The cost of clearing an outside drain is based on a number of factors. These factors include the type of the blockage, the method used, the location of the property as well as the ease of access. Using the blockage type as an example, a small blockage in a toilet or sink is usually priced within the range of £50 to about £70. However, for an extensive blockage deep in your outside drain that’s hard to access, you may end up incurring anything within the range of £150 to about £200.

There are also a wide variety of methods that can be used to clear blockages from an outside drain which will also play a key role in the final cost of the service. These methods include drain jetting which usually costs within the range of £70 to £175, drain rodding from £80 to about £145 as well as a full system scrub which should cost about £150 to £200.

It is, however, important to note that the above costs are just an estimate and other factors as mentioned earlier on will also have an influence on the final price.

If you feel your drains are sluggish or perhaps you’re hearing some strange sounds coming from them when you carry out tasks like flushing your toilet, then it’s highly likely that you have tree roots in your sewer line. If left unattended, this may lead to a real problem which will definitely cost a lot of money to fix. Therefore, it’s always smart to take care of this issue before it gets out of hands. In this guide, we’re going to take you through some of the procedures you can implement to get rid of tree roots from your sewer line. Let’s take a look!

• Through the use of rock salt. Rock salt should not be mistaken for table salt or coarse sea salt. These are what people throw at icy side walks and can be gotten at any local hardware store. It can be used for the removal of small tree root. To do this, simply flush some amount of rock salt down your toilet about 1/2 pound at a go. Upon flushing down the last batch, do not turn on the water for at least 12 hours. This will allow the rock salt time to sit in the pipes and make the environment totally harsh to the tree roots.
• Through the use of a foaming root killer. Another effective way to remove a small tree root from sewer pipes is by using an herbicide which doesn’t only kills root but also prevents them from growing back due to the fact that it leaves behind a residue that tree roots don’t like. This can be gotten at a local hardware or home and garden store. To use this, you simply have to follow the instructions on the label.

If you are not sure or if these methods don't help then getting a professional to fix the problem is your next step.