Damp Proofing in Wembley
Extensions including garage conversions will typically require extra damp proofing to be added during the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be updated as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, and so is it vital to ensure that your garage conversion makes use of suitable damp proofing methods.