Damp Proofing in Stanmore
Extensions such as garage conversions will often require additional damp proofing to be added through the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might need to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it important to ensure that your garage conversion makes use of suitable damp proofing methods.
