Damp Proofing in Ruislip
Extensions such as garage conversions will usually require extra damp proofing to be installed through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will usually be achieved by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.