Commercial Air Conditioning in Carrickfergus

In several parts of the UK, air conditioning systems are a must especially in the warmer summer months. Fortunately, if your AC system isn’t functioning the way it’s supposed to, suffers frequent system breakdowns when overworked mostly during the hot summer days or perhaps you’re just tired of just having to manage with window units, the latest air conditioning units offers both features and performance that’s superior to the earlier models. And as you would have expected, each facet comes with a cost.

There are a number of factors that can determine the cost of an air conditioning unit. Out of all these factors, the size of your home happens to be the most significant factor that influences an air conditioning unit’s cost. Air conditioning systems are measured in tons, which is a measure of the amount of heat they’re able to remove from a home within an hour. As a rule of thumb, you’ll require about 1 ton of cooling per 500 to 600 square feet. Unfortunately, the square footage alone can’t be used to determine the tonnage. Other factors that’ll also play a significant role includes the efficiency of your most preferred AC unit, how well the home is insulated as well as the thermal nature of your home. On the average, a new air conditioning system for an average home should be within the range of £1000 to £3000 for a unit as well as the installation costs which can vary largely depending on the condition of your ducts. These figures may seem quite expensive, but when the hot summer days come, you’d be glad to have had one installed in your home.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

Most air conditioning units will need yearly maintenance. This will involve a full service and cleaning of filters. In very dusty areas units may need more frequent maintenance. Regular servicing will extend the life of an air conditioning unit. Keep a record of when this is done so you know when to contact someone!

Air conditioning filters can get dirty over time, especially through heavy use. This can have a major impact on how efficient a unit is, increasing how much energy it uses and reducing how effective it is.

This is why it’s a good idea to service your air conditioning system regularly. Part of this should involve checking, cleaning and replacing your filters, to help your units run as efficiently as possible.