Bifold Doors in Torpoint

Bifold doors can be made to measure to suit a huge range of properties. There are minimum and maximum sizes for door leaves. These dimensions vary between manufacturers. Different configurations of bifold door are suitable for different size openings.

Do I Need A Planning Permission For Bifold Doors?

Are you thinking about installing bifold doors for your home or property? If yes, you’d probably want to know if you’re going to need planning permission. Well, you’re not alone! Being fully aware the application process for planning permission might not be the easiest of tasks, several home owners would like to know if they’ll be going through the process for installing bifold doors. The answer is, you may actually not need a planning permission for installing bifold doors in your home. Adding or replacing doors is basically one of the home improvement efforts that are less complicated and as a result, they normally do not require planning permission. But despite that, they still need to comply with the UK’s building regulations.

Changing or adding doors to your home or property are usually considered to be covered under permitted development and even more so, when there’s no extension constructed for the doors. However under certain circumstances, these rights can be removed by the local authorities. A good example is when the property is a listed building or in a designated conservation area.

In the event whereby you find yourself having to apply for a planning permission, the time it usually takes to be granted one depends on the number of planning applications on queue. However, it typically takes about 8 weeks or 2 months to tender your application and be granted planning permission if it’s required. To apply for planning application by UK households, you’ll have to pay £172 - which is the set application fee nationwide. In certain situations where objection arises, there may be some delays in the process. If you’re still not certain whether your new bifold doors will require a planning permission, we’d recommend consulting your local authority.

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.