Bathroom Design & Install in Lichfield

It is crucial to make the walls of your bathroom waterproof, and bathroom wall panels or bathroom cladding is not only a great way to do that, but its also the easiest way to update the look of your bathroom. When it comes to adding wall panels to your bathroom, there are a large selection of designs to choose from which means you’ll always find something that’ll suit your space. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom panels installation. Let’s have a look!

1. Get the right tools and supplies. You’ll require a handsaw, jigsaw, or circular saw, hacksaw, drill, hammer, 1200mm spirit level, sealant gun, suction cups and tape measure.
2. Prepare the bathroom. Ensure that the bathroom walls are degreased, clean and, dust and dirt free. Also make sure that its flat and even with a spirit level.
3. Make sure a fixing method is in place. If not, make use of treated battens as a fixing method. Fit all battens in such a way that’s plumb and parallel.
4. Fit the shower tray. Take a measurement of the shower tray to identify the length of the seal strips that is needed while also making room for the shower screen.
5. Add the seal strips.
6. Cut the panels to size. Mark the bathroom wall panels and cut to get the right measurement in both height and width. Also ensure to make room for pipe and shower head holes at this point.
7. Install the panels.

Asides from the cost of adding a new bathroom to your property, one other essential factor you’ll need to consider before moving forward is whether or not a planning permission is required to complete the project. This is a very important step as failure to obtain a planning permission when its actually needed can lead to a severe penalties from the authorities. If you’re also wondering if you proposed bathroom addition project will also require a planning permission, then you’ve come to the right place! In this post, we’re going to let you know if you’d really require a permission to add a new bathroom or otherwise. Let’s take a look!

Generally, bathroom extensions are normally classified as permitted development which allows you to carry out your project without any interruptions from the law or your local authority. In other words, if your extension is meets up with the guidelines of the permitted development rights, you won’t have to apply for a planning permission. However if otherwise, you’ll have to apply for a planning permission to your local council and may require additional reports. What’s more? If you plan on adding the bathroom to a listed building, you must obtain a planning permission as you’d be altering the internal fabric of the building.

And regardless of your position, you’ll always need building regulations approval before you can carry out any bathroom extension project. It may also be required that you’ll have to issue a part wall notice if you’re to build on or close to the boundary with a neighbour.

Are you thinking about updating your bathroom? If yes, then you’d probably want to know how to go about it. Well, when it comes to bathroom remodelling, the process always begins with the drawing of a floor plan. If you don’t know how to go about that, then you’ve come to the right place! In this guide, we’re going to take you through the bathroom floor plan drawing process. Let’s take a look!

First and foremost, you can make use of the pencil and paper approach as it happens to be much cheaper than the computer based approach. Plus, you don’t have to be an art genius in school to complete the task satisfactorily.

1. Sketch it out. Create a rough sketch of the space on unlined paper. This should feature all openings like the doors and windows, the spots where the existing plumbing fixtures are located, the location of the electrical lines including outlets, receptacles, heating and cooling pipes and more
2. Add dimensions to the sketch. The next line of action would be to take measurements of the bathroom. With the help of a friend, hold the tape tightly at both ends in order to get the right dimensions. Then, measure the length of the walls, fixtures, windows and mark then roughly on the sketch. Once done, you can go back to double check the recorded measurements for accuracy.
3. Transfer the room dimensions to a sheet of graph paper. At the stage in the process, you should be aware that each 1/4 inch square on the graph paper is equal to 6 inches or half foot. You can start by drawing the bathroom walls and partitions as well as the surrounding areas. Then, add the doors and the direction they swing open and the windows present. Once done, draw the fixtures to complete the floor plan.

Planning your bathroom can be a very daunting task especially when you have little to no idea to start from. If you’re facing this challenge, you’re definitely not alone. In this post, we’ll take you through the bathroom planning process to ensure you get it right the first time. Let’s take a look!

1. Assess the bathroom. You can start the planning process by thinking who will be using the space, the number of people that will be using it and the likes as they would have a big bearing on the scheme you’d choose at the end of the day.
2. Take a measurement of the space. The scale of the space must be enough to accommodate your plans, so before you start planning you have to consider if there’s sufficient space.
3. Ask the experts. It’s always a great idea to consult the experts before make any decisions. Simply visit any local bathroom showrooms and online platforms, you should get bathroom designers for reliable details and advice.
4. Choose a layout. Getting a bathroom layout that ticks all the boxes right from the beginning is vital. If you have an existing layout which works well, don’t change it. It’ll be a much cheaper option as moving waste and water pipes can be very costly.
5. Look out for inspiration and be realistic with your space. You can talk to friends that have complete similar projects, check online platforms of bathroom designers and remember that functionality should always be above aesthetic when it comes to bathrooms.
6. Put storage into consideration
7. Factor in the ventilation
8. Put the bathroom lighting in your plan
9. Conclude with a budget
10. Get recommendations from loved ones or trusted individuals about the right tradespeople.