Artex is a substance that is used for for surface decorating within the inside of homes. It is commonly put to use to add a textured surface to ceilings. Artex is still popular as another option to smooth plaster ceilings, and an expert painter and decorator should be able to apply artex in many different textured design finishes. Artex refers to a particular manufacturer, but there are other manufacturers who make equivalent materials. Older artex ceilings can be repaired as well, with many different products and applicators on the market in order to make this procedure as convenient as possible. There exists a wide range of different alternatives when it comes to the varieties of texture which artex can be used to produce. Stipple, swirl, or shell effects may be administered, all of which can be done as a Do It Yourself job comparatively easily. Expert painters and decorators will be able to examine with you what finish would best suit your area, and make sure that artex is put on to create a superior quality and consistent appearance. Artex may even be painted over, and deciding on a shade which goes well with the texture of the surface can enhance an old ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Trimdon Station in October 2024
Requests for Artexing quotations in Trimdon Station in October 2024. 0% change from September 2024.
Requests for Artexing quotations in County Durham in October 2024. 0% change from September 2024.
Trimdon (population 2,958) is a town in Region Durham, in England (earlier Tremeldon (1196) or Tremedon (1262 )). It is 9 miles west of Hartlepool, and adjacent to Trimdon Colliery, Trimdon Grange and Deaf Hill (also referred to as Trimdon Station). In your area, to identify it from these it is known as Trimdon Village or just "The Town". The primary prime focus of "The Town" is Saint Mary Magdalene church, which was built during the Norman period (roughly 1145AD). Trimdon Labour Club (now shut) was the setup for a few of the previous prime minister and constituency MP, Tony Blair's constituency speeches. Blair's local house remained in close-by Trimdon Colliery.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Trimdon Station.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today