Artex is a material utilised for decorating surfaces inside the inside of homes. It is often made use of to apply a textured surface to ceilings. Artex is still in demand as a substitute to smooth plaster ceilings, and a professional painter and decorator should have the ability to apply artex in numerous different textured pattern appearances. Artex identifies a particular manufacturer, however there are alternative manufacturers who manufacture similar products. Older artex ceilings can be restored as well. There are an assortment materials and applicators on the market to help make this task as straightforward as possible. There's a assortment of different choices with regard to the types of texture which artex may be applied in. It may be applied in stipple, swirl, or shell effects, all of which may be undertaken as a Do It Yourself task comparatively easily. Experienced painters and decorators will be able to examine with you which effect would complement your area, and guarantee that artex is administered to produce an excellent quality and consistent finish. Artex may also be painted over, and picking a shade which suits the texture of the surface area can regenerate a tired ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Thornhill in October 2024
Requests for Artexing quotations in Thornhill in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Dumfriesshire in October 2024. 0% change from September 2024.
Thornhill is a town in the Mid Nithsdale area of Dumfries and Galloway, Scotland, southern of Sanquhar and also north of Dumfries on the main A76 road. Thornhill sits in the Nithsdale valley with the Carsphairn and Scaur range to the west and also the Lowther hills to the east. It was at first a little village, prepared and integrated in 1717 on the Queensberry Estate when driving connecting Dumfries to Glasgow. The Earl of Queensberry initially called the village 'New Dalgarnock' nevertheless the name did not attain preferred authorization. The town is largely consisted of a grid pattern with the main road of Drumlanrig Street (the A76), East and also West Morton Streets, New Street, Townhead Street as well as Gill Road (the A702). The town is near Drumlanrig Castle, a 17th-century turreted mansion once the old Douglas fortress, currently house to the Fight it out of Buccleuch as well as Queensberry. The premises have Tibbers Castle which was founded in the 12th or 13th century. One of the most recently published Census data from 2001 places the population at 1,512 citizens.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Thornhill.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today