Artex is a material used for surface decorating throughout the inside of homes. It is typically used to administer a textured surface to ceilings. Artex remains in demand in place of smooth plaster ceilings, and a specialist painter and decorator should be able to apply artex in various different textured pattern finishes. Artex describes a specific brand, but there are various other manufacturers who create similar materials. Older artex ceilings can be restored as well. There are a number of materials and applicators on the market in order to help make this procedure as easy as possible. There exists a wide range of different alternatives when it comes to the styles of texture that artex could be applied in. Stipple, swirl, or shell effects could be applied, all of which may be done as a Do It Yourself task fairly easily. Specialist painters and decorators can discuss with you what texture would best complement your area, and ensure that artex is administered to produce a superior quality and consistent appearance. Artex can even be painted over, and deciding on a colour that goes well with the texture of the surface area can regenerate an old ceiling and breathe life into an area.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in South Molton in December 2024
Requests for Artexing quotations in South Molton in December 2024. 0% change from November 2024.
Requests for Artexing quotations in Devon in December 2024. 0% change from November 2024.
South Molton is a village in Devon, England. It becomes part of the North Devon city government district. The community is on the River Mole. According to the 2001 census the civil parish of South Molton had a population of 4,093, increasing to 5,108 at the 2011 Census. The town also has an electoral ward with the very same name. The population of this ward at the very same census was 4,875 We have consequently the uncommon circumstance where the community is larger than the ward. The town was among the boroughs reformed by the Municipal Reform Act 1835. It preserved this condition as a municipal district until 1967, when it ended up being a rural district in the South Molton Rural District. South Molton is a well-built market community trading mostly in lamb as well as livestock. South Molton had a railway station on the Devon Railway up until 1966, when the branch line was finally closed. The station was defined carefully in the best selling railway magazine the Country Railway. It is positioned on the southern side of Exmoor simply off the North Devon web link road, which in part complies with the route of the train line.
South Molton - EX36
Enquiry from: Michael S
Start Date: 1 to 3 months
Kitchen ceiling reartexing after removal of cupboard. 5mtrx2.5mtr Are you the property owner: Owner of the property What are you looking to Artex: Ceiling How many ceilings do you require artexing: 1 ...
Crediton - EX17
Enquiry from: Joy A
Start Date: Immediate
We have a small bedroom just been freshly plastered we'd like an artex finish applied in the circle pattern and painted Are you the property owner: Tenant (with permission) Property Type: Residential...
Crediton - EX17
Enquiry from: Brian D
Start Date: 1 to 3 months
To repair existing artex and then replace.It is the ceiling in the hall. Are you the property owner: Owner of the property What are you looking to Artex: Ceiling How many ceilings do you require ...
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in South Molton.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today