Artex is a material used for surface decorating within home interiors. It is usually employed to add a textured surface to ceilings. Artex remains popular as a substitute to smooth plaster ceilings, and a specialist painter and decorator should be able to apply artex in various different textured design appearances. Artex identifies a specific brand, however there are different manufacturers who manufacture very similar building materials. Older artex ceilings may be restored as well, with a number of materials and applicators on the market in order to help make this procedure as simple as possible. There exists a wide range of different options with regard to the designs of texture which artex could be applied in. Stipple, swirl, or shell effects may be administered, all of which can be done as a DIY project comparatively easily. Specialist painters and decorators can explore with you what finish would best go with your area, and ensure that artex is put on in a top quality and consistent texture. Artex can be painted over, and opting for a colour which matches the texture of the surface can rejuvenate a tired ceiling and breathe life into an area.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Penmaenmawr in December 2024
Requests for Artexing quotations in Penmaenmawr in December 2024. 0% change from December 2024.
Requests for Artexing quotations in Gwynedd in December 2024. 0% change from December 2024.
Penmaenmawr is a community and community in Conwy County District, Wales, which was formerly in the church of Dwygyfylchi. It is on the North Wales coastline between Conwy as well as Llanfairfechan as well as was an essential quarrying town, though quarrying is no more a significant company. The population of the neighborhood was 4,353 in 2011, consisting of Dwygyfylchi as well as Capelulo. The town itself having a population of 2,868 (2011 ). It was named after Penmaenmawr mountain, which stands over the sea immediately west of the town. Much of its previously rounded top (with an old hill-fort) has been quarried away, leaving the present-day lower level top. The town was bypassed by the A55 Expressway in the 1980s, shedding its old Edwardian duration promenade while doing so, which was largely replaced by a contemporary one. Penmaenmawr is noted for its spectacular hill and seaside walks. Close-by are the popular destinations of Bwlch Sychnant (Sychnant Pass) and also Mynydd y Dref, and the town also lies partly within Eryri, the Snowdonia National Park.
Penmaenmawr - LL34
Enquiry from: Laura R
Start Date: Immediate
Estimate please for a small terrace house of artex removal on walls in a bedroom..and ceilings. A ball park figure as its I my house survey - not living in the house .Thank you Are you the property ow...
Llandudno - LL30
Enquiry from: Graham Y
Start Date: Immediate
Smother over current artex tipple ceiling with artex so it totally smothe
Menai Bridge - LL59
Enquiry from: Sylvia D
Start Date: Immediate
artexing on a kitchen ceiling size approx 12ft x13ft Are you the property owner: Owner of the property Property Type: Residential What are you looking to Artex: Ceiling
Bangor - LL57
Enquiry from: Derek J
Start Date: Immediate
Moving to new house soon.need to take stonework chimney breast down.so need to fill in and blend in to existing comb affect artex
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in Penmaenmawr.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today