Artex is a building material utilised for surface decorating throughout the inside of homes. It is commonly put to use to administer a textured surface to ceilings. Artex remains in demand instead of smooth plaster ceilings, and a qualified painter and decorator should have the ability to apply artex in many different textured style finishes. Artex describes a specific brand, but there are various manufacturers who create very similar building materials. Older artex ceilings can be refurbished as well. There are various materials and applicators on the market to make this method as effortless as possible. There's a variety of different options when it comes to the designs of texture which artex can be applied in. It may be applied in stipple, swirl, or shell effects, all of which may be done as a Do It Yourself job fairly easily. Knowledgeable painters and decorators will be able to review with you which impact would best go with your area, and guarantee that artex is put on in a quality and consistent surface. Artex can be painted over, and deciding on a colour which goes with the texture of the surface area can renew an old ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Market Rasen in October 2024
Requests for Artexing quotations in Market Rasen in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Lincolnshire in October 2024. 0% change from September 2024.
Market Rasen is a community and civil parish within the West Lindsey district of Lincolnshire, England. The River Rase runs through it east to west, roughly 13 miles (21 kilometres) north-east from Lincoln, 18 miles (29 km) east from Gainsborough and also 16 miles (26 kilometres) south-west from Grimsby. The community is known for Market Rasen Racecourse as well as being close to the epicentre of a 2008 earthquake. The population of the civil parish at the 2011 census was 3,904. Market Rasen is a tiny market town on the edge of the Lincolnshire Wolds. The town lies on the highway in between Lincoln and also Grimsby, the A46 and gets on National Cycle Route 1 (part of EuroVelo 12) of the National Cycle Network. The place-name 'Market Rasen' is first proved in the Domesday Book of 1086, where it looks like Rase, Rasa and Resne. The name derives from the Old English ræsn definition 'slab', as well as is thought to describe a plank bridge. The river name 'Rase' is a back-formation. Initially "Rasen", as it is recognized locally, was called "East Rasen", "Rasen Parva" or "Little Rasen". The community centre has a homogeneous 19th-century redbrick look of mostly Georgian and Victorian style, centred on a market area with a medieval church, recovered in the 19th century. The River Rase flows through the town and is crossed by Jameson Bridge, Caistor Road Bridge and Crane Bridge. Market days are Tuesdays, Fridays and also Saturdays. On each Tuesday there is a public auction of goods and also create, and on the initial Tuesday of each month, a farmers' market. Every Friday the Women's Institute holds a nation market. Market Rasen's community fire as well as police station opened December 2005. It is just one of the initial purpose-built mixed fire as well as police headquarters in the UK. In 2011 it was one of the communities selected for the Portas Review of sectarian retailing service.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Market Rasen.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
We can help you get more Artexing work and boost your business.
Join today