Artex is a substance that's used for for surface decorating throughout the interior of homes. It is often put to use to apply a textured surface to ceilings. Artex continues to be in demand as an alternative to smooth plaster ceilings, and a specialist painter and decorator should have the ability to apply artex in many different textured style finishes. Artex identifies a particular manufacturer, but there are some other manufacturers who make comparable materials. Older artex ceilings can be repaired as well, with various products and applicators available to make this task as quick as possible. There is a wide selection of different choices with regard to the varieties of texture that artex could be used to create. It may be administered in stipple, swirl, or shell effects, all of which is often undertaken as a DIY project comparatively easily. Expert painters and decorators will be able to review with you what effect would complement your space, and ensure that artex is applied to produce a quality and consistent surface. Artex can be painted over, and deciding on a shade which suits the texture of the surface area can revitalize a tired ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Llanwrtyd Wells in October 2024
Requests for Artexing quotations in Llanwrtyd Wells in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Powys in October 2024. 0% change from September 2024.
Llanwrtyd Wells is a town and also community in mid Powys, Wales, in the historic area of Brecknockshire (Breconshire) on the Afon Irfon. The town gets on the A483 in between Llandovery and Builth Wells and lies near the pass between the Tywi as well as Irfon valleys. The neighborhood likewise consists of the smaller sized settlements of Llanwrtyd as well as Abergwesyn, the valley of the Afon Irfon, and a huge part of the "Desert of Wales". With a population of 850 (UK Census 2011), it asserts to be the smallest community in Britain, although Fordwich in Kent has a smaller population. Unlike its past background as a medspa town, when hundreds crowded to take the waters for their asserted medical results, the area is now better recognized for leisures such as pony walking, hill biking, walking and birdwatching, and also for its annual Man versus Horse Marathon, Beer Festival as well as World Bog Snorkeling Championship. The town's largest employer Charcroft Electronics lies in buildings which were formerly the Dol-y-Coed Hotel. The hotel, on the financial institutions of the Irfon, dates from about 1535.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Llanwrtyd Wells.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
We can help you get more Artexing work and boost your business.
Join today