Artex is a building material that's used for for surface decorating inside the inside of homes. It is normally worked with to add a textured surface to ceilings. Artex remains popular in place of smooth plaster ceilings, and a professional painter and decorator will be able to apply artex in numerous different textured style finishes. Artex refers to a specific brand name, but there are more manufacturers who produce similar materials. Older artex ceilings can be repaired as well. There are many different materials and applicators available for purchase in order to help make this procedure as effortless as possible. There's a assortment of different alternatives with regard to the types of texture which artex can be applied in. Stipple, swirl, or shell effects can be administered, all of which is often done as a DIY task fairly easily. Specialist painters and decorators will be able to consider with you which finish would best go with your space, and make sure that artex is applied in a high quality and uniform surface. Artex may also be painted over, and picking out a colour that suits the texture of the surface can accentuate a tired ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Isle Of Colonsay in October 2024
Requests for Artexing quotations in Isle Of Colonsay in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Inner Hebrides in October 2024. 0% change from September 2024.
Colonsay is an island in the Inner Hebrides of Scotland, situated north of Islay and southern of Mull. The ancestral home of Clan Macfie as well as the Colonsay branch of Clan MacNeil, it remains in the council area of Argyll and also Bute and also has a location of 4,074 hectares (15.7 sq mi). Lined up on a south-west to north-east axis, it gauges 8 miles (13 km) in size and also gets to 3 miles (4.8 kilometres) at its widest point. The island's populace was 124 as recorded by the 2011 census a boost of virtually 15% since 2001 when there were 108 common residents.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Isle Of Colonsay.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
We can help you get more Artexing work and boost your business.
Join today