Artex is a building material used for decorating surfaces in the interior of homes. It is normally chosen to administer a textured surface to ceilings. Artex is still popular as an alternative to smooth plaster ceilings, and a specialist painter and decorator can apply artex in various different textured style appearances. Artex describes a specific brand name, however there are some other manufacturers who make very similar products. Older artex ceilings can be restored as well, with a range products and applicators available in order to make this procedure as convenient as possible. There is a variety of different options for the designs of texture which artex can be applied in. Stipple, swirl, or shell effects may be applied, all of which may be performed as a Do It Yourself job comparatively easily. Knowledgeable painters and decorators will be able to discuss with you what result would best suit your area, and ensure that artex is administered in an excellent quality and uniform finish. Artex may even be painted over, and selecting a shade that goes with the texture of the surface can enrich an old ceiling and breathe life into a space.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Haslemere in November 2024
Requests for Artexing quotations in Haslemere in November 2024. 0% change from October 2024.
Requests for Artexing quotations in Surrey in November 2024. 0% change from October 2024.
Haslemere is a town in the borough of Waverley in the south of the English county of Surrey. It is at the tripoint in conjunction with Hampshire and West Sussex, positioned 12 miles southwest of Guildford. According to the 2011 Census, the town has a population of 16826, and the town covers an area of 8.98 square miles. Settlements in the area have actually been dated back to 1221. Its development is believed to have been promoted by Richard II in 1394 when it was granted a charter, which was declared by a brand-new charter issued by Elizabeth I in 1596. This exclusive status is recognised every 2 years by the Charter Fair, which is held in the High Street. Initially one of the rotten districts, Haslemere undertook substantial redevelopment after the building and construction of the Portsmouth Direct Line, which linked the town with Waterloo and Portsmouth Harbour train stations. It soon transformed into a classy region in which to live by the middle of the 19th century, and it continues to serve as a commuter town for London. The town's high street is noticeably large, which goes back to its use as a livestock market prior to the 1920s. Located in the high street is a mixture of, predominantly independent, shops, restaurants, cafés and pubs. Wey Hill is another spot that includes a range of independent shops, a bank, dining establishments, takeaways and a pub. This is also the location of the library and two supermarkets. The town is also called the the home of Carl Dolmetsch, an instrument maker, whose business restored the recorder in the late 19th century. For all of your home upgrades, make sure to make use of trusted experts in Haslemere to make certain of quality.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Haslemere.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today