Artex is a material used for decorating surfaces in the interior of homes. It is generally made use of to administer a textured surface to ceilings. Artex remains fashionable in place of smooth plaster ceilings, and an experienced painter and decorator will be able to apply artex in various different textured pattern appearances. Artex describes a specific manufacturer, however there are alternative manufacturers who make comparable products. Older artex ceilings can be repaired as well. There are many different products and applicators available for purchase to make this task as convenient as possible. There exists a assortment of different choices for the sorts of texture that artex can be applied in. Stipple, swirl, or shell effects can be applied, all of which could be done as a Do It Yourself project fairly easily. Knowledgeable painters and decorators can discuss with you which finish would best suit your space, and guarantee that artex is applied to produce a quality and uniform surface. Artex can even be painted over, and deciding on a shade that goes well with the texture of the surface can rejuvenate an old ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Forsinard in October 2024
Requests for Artexing quotations in Forsinard in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Highland in October 2024. 0% change from September 2024.
Forsinard is a community in the region of Sutherland in the Highland location of Scotland. It is located on the A897 road in Strath Halladale. It is offered by a railway terminal on the Far North Line. The regional hotel closed numerous years ago, yet there is now a b & b simply across the degree going across. Forsinard is positioned in the Flow Country, a location of peat bog which straddles the borders of Caithness as well as Sutherland. The 13,000-hectare (33,000-acre) Fosinard estate was bought in 1977 by Basil Baird. The Royal Society for the Protection of Birds runs a 154 km2 (38,000-acre) nature reserve and also a visitor centre at Forsinard. The Forsinard Flows national nature book brings in a big variety of birds and also wild animals.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Forsinard.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
We can help you get more Artexing work and boost your business.
Join today