Artex is a substance that's used for for surface decorating throughout the interior of homes. It is often chosen to administer a textured surface to ceilings. Artex continues to be in demand instead of smooth plaster ceilings, and an expert painter and decorator can apply artex in many different textured pattern finishes. Artex refers to a particular brand name, but there are various manufacturers who make similar building materials. Older artex ceilings may be restored as well, with a selection of products and applicators on the market to help make this procedure as easy as possible. There's a wide array of of different alternatives for the types of texture that artex can be used to create. It could be administered in stipple, swirl, or shell effects, all of which may be performed as a Do It Yourself job comparatively easily. Experienced painters and decorators will be able to explore with you which result would be most suitable for your room, and make sure that artex is administered to create an excellent quality and consistent appearance. Artex may even be painted over, and deciding on a shade which matches the texture of the surface can rejuvenate an old ceiling and breathe life into a space.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Cornhill-on-tweed in October 2024
Requests for Artexing quotations in Cornhill-on-tweed in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Northumberland in October 2024. 0% change from September 2024.
Cornhill-on-Tweed (population 347) is a small town as well as civil church in Northumberland, England concerning 1 mile (1.6 kilometres) to the east of Coldstream, Scotland. The communities of West Learmouth and also East Learmouth are located to the south and west of the town specifically. A mile north-west of the village, on a spur over the River Tweed are the earthwork continues to be of Cornhill Castle. Cornhill-on-Tweed exists at a junction of the A697 and also A698 roadways - the last connecting to Berwick-upon-Tweed, the local significant community, some 13 miles (21 km) away.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Cornhill-on-tweed.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today