Artex is a building material that is used for for decorating surfaces in home interiors. It is typically employed to add a textured surface to ceilings. Artex remains fashionable instead of smooth plaster ceilings, and a highly skilled painter and decorator should have the ability to apply artex in a selection of different textured pattern finishes. Artex relates to a specific brand, but there are alternative manufacturers who make comparable products. Older artex ceilings can be fixed as well, with a variety of materials and applicators available for purchase in order to make this task as straightforward as possible. There's a variety of different options for the designs of texture that artex may be used to produce. It may be administered in stipple, swirl, or shell effects, all of which is often undertaken as a DIY project fairly easily. Knowledgeable painters and decorators will be able to consider with you what finish would be most suitable for your room, and make sure that artex is put on to create a top quality and uniform appearance. Artex can also be painted over, and deciding on a shade which goes well with the texture of the surface area can invigorate a tired ceiling and breathe life into a space.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Aberargie in January 2025
Requests for Artexing quotations in Aberargie in January 2025. 0% change from December 2024.
Requests for Artexing quotations in Kinross-shire in January 2025. 0% change from December 2024.
Aberargie is a village in the south east of Perth and Kinross, Scotland. It sits on the western edge of the old Abernethy Parish along the River Farg, which is where it derives its name from. Aberargie is about 1.6 miles west of Abernethy and 2.2 miles south-east of Bridge of Earn.
Aberargie can be dated back to at least 460AD, as this was when the Pictish Chronicle listed it as part of Nechtan's land grant. It's highly likely that it has been in existence for a lot longer. Previously, the community thrived by utilising the River Farg to power water mills for sawing timber and milling flax and meal. The mills stopped production by the early 20th century and the most complete mill was destroyed in the 1950s.
Archaeologists have found neolithic flints in the village and Scottish Medieval pottery. They have also found flintlock rifle and pistol flints, suggesting that there has been a settlement at Aberargie for an extensive amount of time.
If your property in Aberargie needs a replacement boiler, it's important that you look at quotations from at least three reliable firms.
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in Aberargie.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today