Artex removal in Wells-next-the-sea

Find Artex Removal Prices in Wells-next-the-sea

Home > Plastering & Ceilings Projects > Artex Removal > Wells-next-the-sea

Artex removal in Wells-next-the-sea

Are you looking for Artex Removal in ? Our network of installers are can help with your task. All of our in are examined so you can see local honest reviews, when the business was created, reviews, approval and also cost permitting you to make the appropriate decision on who to hire. Allow us take the headache out of locating up to 4 experts for your Artex Removal job.

 

Artex merely refers to a surface area coating that's frequently incorporated for interior decorating. Although it's normally located on ceilings but it can additionally be made use of on the walls too. The surface finish allows the specialist plasterer or decorator include both texture along with patterns to it. Originally, the name "Artex" is the hallmark of a UK based business referred to as Artex Ltd. With time, the Artex name has actually been used to refer to all distinctive finishes, although there are other companies that make and sell the same products.

 

Before eliminating artex on your ceiling, it's always vital to identify whether the surface area covering material consists of asbestos. Other than this, you may also want to understand how much you're mosting likely to have the asbestos artex ceiling got rid of. If yes, then you've come to the ideal location! In order to aid you make the most effective educated decision feasible, this post was written to assist provide you an suggestion of the price it's going to cost to remove asbestos artex ceiling.

 

We will supply approximately 4 Artex Removal pros in your area, who will certainly supply quotations for the job you desire done. You'll get a property visit from specialists in that'll help you to select the best Artex Removal for your house before executing the installation. Enter your postal code to begin looking now.

Average Artex Removal cost in Wells-next-the-sea

How much artexing removal might cost depends on how big the area is, how accessible it is and your location. Different plasterers charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artex removal in the UK is about £200.

Average price per Artex Removal job in 2025

Avg. price low

Avg. price low
£190

Avg. price

Avg. price
£200

Avg. price high

Avg. price high
£400

£500

£375

£250

£125

£0

Prices based on actual Artex Removal costs for Wells-next-the-sea, as reported by local LeadsDoWork members.

Artex Removal installation cost in Wells-next-the-sea 2025

Labour cost £140
Material cost £50
Waste removal £10
Time frame: 1-3 days

Artex Removal searches in January 2025

Artex Removal Projects in Wells-next-the-sea in December 2024

220

Requests for quotations in Wells-next-the-sea in December 2024

0

Requests for Artex Removal quotations in Wells-next-the-sea in December 2024. 0% change from November 2024.

0

Requests for Artex Removal quotations in Norfolk in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Artex Removal searches in cities and towns near Wells-next-the-sea December 2024

Wells-next-the-sea

Wells-next-the-Sea is a small town as well as port on the North Norfolk shore of England. The civil parish has an area of 16.31 km2 (6.30 sq mi) and in 2001 had a population of 2,451, decreasing to 2,165 at the 2011 Census. Wells is 15 miles (24 km) to the eastern of the resort of Hunstanton, 20 miles (32 km) to the west of Cromer, and also 10 miles (16 kilometres) north of Fakenham. The city of Norwich lies 32 miles (51 km) to the south-east. Nearby villages consist of Blakeney, Burnham Market, Burnham Thorpe, Holkham and also Walsingham. The North Sea is currently a mile from the town; the major channel which when strayed via marshes, foraged by sheep for centuries, was constrained by earthworks to the west in 1859 when Holkham Estate redeemed some 800 hectares of saltmarsh north-west of Wells with the building of a mile-long bank. This reclamation was declared to have actually lowered the tidal search though the West Fleet which provided much of the water went into the channel to its north.Because the community has no river going through it, it relies upon the trends to scour the harbour. The issue of siltation had busied the merchants of the town for hundreds of years and occupied the interests of various designers, leading eventually to disagreements which pertained to court in the eighteenth century. Sir John Coode, that had been knighted for his work on the conclusion of Portland harbour was recruited to solve its siltation issues in the 1880s. No tried remedy showed irreversible. The growth of faster aquatic traffic whose wake cleans at the banks of the marshes has expanded the network and decreased tidal flow even more. The community has actually been a port because prior to the fourteenth century when it provided grain to London and ultimately to the miners of the north eastern in return for which Wells was provided with coal. Until the nineteenth century, it was simpler to bring mass cargoes by sea than overland. Wells was likewise an angling port: in 1337 it is recorded as having had thirteen angling watercrafts; next door Holkham had 9. Its seafarers brought first herring and then cod from Iceland in quantity between the fifteenth and seventeenth centuries. The guideline of the harbour in order to maintain its usage was by Act of Parliament in 1663; and in 1769 Harbour Commissioners were assigned with powers over vessels getting in as well as leaving (as they still have today). The Quay was substantially restored in 1845 as part of efforts to boost the town. At the same time, Improvement Commissioners were designated with the job of making the town wide and eye-catching to citizens as well as the burgeoning visitor trade. As a little port, it constructed ships till the late 19th century; it never ever transferred to constructing electric motor vessels or to steel hulls. The coming of the railway in 1857 lowered the harbour profession but it revived quickly after the Second World War for the import of fertilizer and also animal feed. In 1982 there were 258 ship movements right into the harbour.

Looking for Artex Removal in Wells-next-the-sea?

Get free quotes from local plasterers

Get free quotes

Local & reliable plasterers near me

Tell us about your artex removal project

Answer a few quick questions, so we can match you with local plasterers who can help.

Find up to 4 plasterers in Wells-next-the-sea

Get free, no-obligation local artex removal quotes from 4 verified plasterers working in Wells-next-the-sea.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

how to get artex off walls?

Artex is a water based decorative surface coating is typically incorporated on both walls and ceilings so as to apply a pattern. During the peak of its popularity in the 1970’s, it was considered the height of fashion when it comes to interior wall designs however its major drawback remains the fact that it usually contains asbestos especially if it was manufactured before the laws governing the use of asbestos was changed in the year 2000. And asbestos, as we know it, can be deadly when disturbed and its fibres are inhaled.

 

If you have artex installed in your purchased property and you do not know when the artex walls were done, or perhaps you just want to change the aesthetic design of your home into something more modern and to your personal taste, then you may want to remove the existing artex from your property for good. If this is your wish then you’ve come to the right place.

 

To remove artex from your walls you can choose to do so using the steaming method or through the use of an external product.

 

Using the steaming method, you should know that it’ll be more labour intensive and time consuming. You need a lot of patience moving your steamer slow and steady because if left on a spot for too long can damage the wall behind the coating. Once the artex has been dampened with the steamer, you can then scrape them off with a handheld scraper.

 

A faster solution would be to use an external product to remove your artex.  For example, you can use X-Tex which is a water-based coating remover. All you need to do is paint the substance over your artex wall and leave to dry for about 30 to 60 minutes before peeling away the artex.

is artex dangerous?

The short and simple answer to this question is, it depends. Artex surface coating was manufactured with white abestos ( until the mid 1980’s ) in order to strengthen as well as harden it. In other words, this implies that all the ceilings and walls coverings made by Artex Ltd and other manufactures at the time are highly likely to contain asbestos. Although Artex Ltd stopped using asbestos as early as the mid 1980’s, there were still other manufacturers who continued using it until 1999 when the laws and regulations covering the use of asbestos changed in the year 2000.

 

Asbestos, however, is only harmful when disturbed and releases its deadly fibres. For instance, when it’s being sanded and removed as it usually poses no risks when left undisturbed. Since it’s not possible to identify Artex containing asbestos fibres with the naked eye, it’s strongly recommended that you hire the services of a qualified person or company to help determine if you have asbestos in your ceilings or walls especially if your house was constructed before the year 2000. The professionals will be able to advise you on the best course of action as well as if it’s dangerous.

 

To be sure if your Artex contains asbestos, you’ll need to have the artex sampled by an asbestos surveyor. If you’re planning to have a construction or maintenance work done on your property, and the artex is likely to be in the way or disturbed, there’s a need for you to have a refurbishment or demolition asbestos survey done. This will ensure that all the areas that’ll be disturbed by the work is properly tested to determine the presence or otherwise of asbestos. If found, the artex will have to be addressed and either removed or protected before any work can take place.

 

does artex contain asbestos?

The fact is several buildings contain artex as well as other textured coating on walls and ceilings which are all likely to contain asbestos. However, artex itself is not the main threat here but the potentially deadly harmful fibres that’s contained in it. In this post, we’re going to look at whether or not artex truly contains the deadly abestos.

 

The short and simply answer to this question is yes, artex can definitely contain asbestos, however not all artex will contain asbestos. The main reason asbestos was a popular construction material is because it was not only cheap and strong but also because it was very durable and long lasting. It was used in numerous construction materials ( which includes artex ) before it was finally banned in the year 1999. unfortunately during the time when artex was very popular in the 60’s, 70’s as well as 80’s, asbestos was still very much in use during the period. And as a result, a lot of the artex incorporated during that period will contain the deadly asbestos fibres. However, this does not only apply to artex, but also other textured coatings containing asbestos were incorporated in construction until 1999 when asbestos was formerly banned in the UK. These asbestos containing materials are often used on walls as well as ceilings of residential properties.

 

Unfortunately, it’s not possible to know an asbestos containing artex just by looking at it. In order to determine whether or not an artex contains the deadly asbestos fibres, it’ll have to be sampled and tested in a laboratory. What’s more? While several artex contains asbestos, asbestos free artex was available from the 1970s. However, since it’s impossible to determine using the naked eye, all artex installed before the ban will be assumed to contain asbestos.

how to get artex off a ceiling?

Artex is a water based surface coating which is used to decorate both ceilings and walls with a textured finish. Back in the 1970’s, artex happens to be very popular when the swirling or spiky effects it creates  were considered to be the best of fashion when it comes to interior designs. However, in today’s world, an artex ceiling is not only considered outdated but also a pain to clean and repair.

 

If you have an artex ceiling in your residential property and looking for a way to get it off, then you’ve come to the right place. In this post, we’re going to show you how its done without much stress.

 

To get started you’d need to get the following tools and material which includes: safety goggles, dust mask and rubber gloves, plastic sheeting, canvas drop cloth ( carpet) or rosin paper (hard floor) and step ladder

 

 

Prepare the room. Start this by moving all furniture out of the room or stack the furniture at the centre of the room and cover using plastic sheets. Once done, cover all non-removable items with plastic sheets and lay down a canvas drop cloth for carpet floors and rosin paper for hard floors

  • Put on your safety gear
  • Use a utility knife or joint knife to slowly chip away at the texture and create a smooth surface.
  • Mix joint compound in a bucket as per the instructions on the package
  • Skim the surface with a thin layer of joint compound to smooth it out using a taping knife, then leave to dry overnight before you proceed
  • Lightly sand the surface smooth with the help of a 220-grit sanding block
  • Use a damp cloth to wipe the surface clean prior to painting.
Placholder Image

Other Top Projects in Wells-next-the-sea

Customer Reviews

Overall rating:


Wells-next-the-sea Artex Removal installers are rated 4.9 out of 5 based on 3 reviews of 18 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Artex Removal projects that have been connected with Artex Removal pros to help them. All Artex Removal contractors All Wells-next-the-sea Artex Removal contractors
Artex ceiling removal in Cardiff Published: 06/12/2024 Professional removal of Artex/popcorn ceilings in Cardiff. Upgrade your interior with a modern, smooth finish through expert plastering services. Read this article
Removal of airbrick and fascia with plastering in lounge, Ferndown Published: 30/12/2024 :Find out how to remove an airbrick and fascia in a lounge and professionally plaster the area, with expert advice for properties in Ferndown. Read this article
Coving installation in a 3×3 metre room in Chepstow Published: 06/12/2024 Coving installation in a semi-detached property in Chepstow. Learn about the process, materials, and benefits of adding coving to enhance a room’s interior. Read this article

Are you a plasterer in Wells-next-the-sea?

We can help you get more artex removal work with our qualified job leads and boost your business.

Join today