Artex removal in Coldstream

Find Artex Removal Prices in Coldstream

Home > Plastering & Ceilings Projects > Artex Removal > Coldstream

Artex removal in Coldstream

Are you looking for Artex Removal in ? Our network of installers are can assist with your task. Every one of our in are examined so you can see local reviews, when business was founded, rankings, approval and also cost allowing you to make the right decision on who to hire. Let us take the problem out of discovering as much as 4 experts for your Artex Removal task.

 

Artex simply describes a surface area finishing that's typically included for interior decoration. Although it's typically discovered on ceilings but it can likewise be utilized on the walls as well. The surface covering enables the expert plasterer or decorator add both appearance in addition to patterns to it. Originally, the name "Artex" is the trademark of a UK based business known as Artex Ltd. Over time, the Artex name has actually been utilized to refer to all distinctive finishings, although there are other companies that produce and market the same products.

 

Prior to eliminating artex on your ceiling, it's always important to figure out whether the surface layer material includes asbestos. Other than this, you may additionally wish to understand how much you're mosting likely to have the asbestos artex ceiling removed. If yes, after that you  have actually pertained to the appropriate place! In order to assist you make the very best notified choice possible, this article was contacted help provide you an suggestion of the price it's mosting likely to cost to eliminate asbestos artex ceiling.

 

We will provide up to four Artex Removal pros in your area, that will certainly offer quotations for the work you desire done. You'll obtain a home visit from professionals in that'll assist you to pick the best Artex Removal for your home before performing the setup. Enter your postcode to begin searching currently.

Average Artex Removal cost in Coldstream

How much artexing removal might cost depends on how big the area is, how accessible it is and your location. Different plasterers charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artex removal in the UK is about £200.

Average price per Artex Removal job in 2025

Avg. price low

Avg. price low
£190

Avg. price

Avg. price
£200

Avg. price high

Avg. price high
£400

£500

£375

£250

£125

£0

Prices based on actual Artex Removal costs for Coldstream, as reported by local LeadsDoWork members.

Artex Removal installation cost in Coldstream 2025

Labour cost £140
Material cost £50
Waste removal £10
Time frame: 1-3 days

Artex Removal searches in January 2025

Artex Removal Projects in Coldstream in December 2024

169

Requests for quotations in Coldstream in December 2024

0

Requests for Artex Removal quotations in Coldstream in December 2024. 0% change from November 2024.

0

Requests for Artex Removal quotations in Berwickshire in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Artex Removal searches in cities and towns near Coldstream December 2024

Coldstream

Coldstream is a town and also civil parish in the Scottish Boundaries area of Scotland. A previous burgh, Coldstream is the home of the Coldstream Guards, a program in the British Army. Coldstream lies on the north financial institution of the River Tweed in Berwickshire, while Northumberland in England lies to the south bank, with Cornhill-on-Tweed the nearby town. At the 2001 census, the community had a population of 1,813, which was approximated to have risen to 2,050 by 2006. The church, in 2001, had a population of 6,186.

Looking for Artex Removal in Coldstream?

Get free quotes from local plasterers

Get free quotes

Local & reliable plasterers near me

Tell us about your artex removal project

Answer a few quick questions, so we can match you with local plasterers who can help.

Find up to 4 plasterers in Coldstream

Get free, no-obligation local artex removal quotes from 4 verified plasterers working in Coldstream.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

does artex contain asbestos?

The fact is several buildings contain artex as well as other textured coating on walls and ceilings which are all likely to contain asbestos. However, artex itself is not the main threat here but the potentially deadly harmful fibres that’s contained in it. In this post, we’re going to look at whether or not artex truly contains the deadly abestos.

 

The short and simply answer to this question is yes, artex can definitely contain asbestos, however not all artex will contain asbestos. The main reason asbestos was a popular construction material is because it was not only cheap and strong but also because it was very durable and long lasting. It was used in numerous construction materials ( which includes artex ) before it was finally banned in the year 1999. unfortunately during the time when artex was very popular in the 60’s, 70’s as well as 80’s, asbestos was still very much in use during the period. And as a result, a lot of the artex incorporated during that period will contain the deadly asbestos fibres. However, this does not only apply to artex, but also other textured coatings containing asbestos were incorporated in construction until 1999 when asbestos was formerly banned in the UK. These asbestos containing materials are often used on walls as well as ceilings of residential properties.

 

Unfortunately, it’s not possible to know an asbestos containing artex just by looking at it. In order to determine whether or not an artex contains the deadly asbestos fibres, it’ll have to be sampled and tested in a laboratory. What’s more? While several artex contains asbestos, asbestos free artex was available from the 1970s. However, since it’s impossible to determine using the naked eye, all artex installed before the ban will be assumed to contain asbestos.

how to get artex off a ceiling?

Artex is a water based surface coating which is used to decorate both ceilings and walls with a textured finish. Back in the 1970’s, artex happens to be very popular when the swirling or spiky effects it creates  were considered to be the best of fashion when it comes to interior designs. However, in today’s world, an artex ceiling is not only considered outdated but also a pain to clean and repair.

 

If you have an artex ceiling in your residential property and looking for a way to get it off, then you’ve come to the right place. In this post, we’re going to show you how its done without much stress.

 

To get started you’d need to get the following tools and material which includes: safety goggles, dust mask and rubber gloves, plastic sheeting, canvas drop cloth ( carpet) or rosin paper (hard floor) and step ladder

 

 

Prepare the room. Start this by moving all furniture out of the room or stack the furniture at the centre of the room and cover using plastic sheets. Once done, cover all non-removable items with plastic sheets and lay down a canvas drop cloth for carpet floors and rosin paper for hard floors

  • Put on your safety gear
  • Use a utility knife or joint knife to slowly chip away at the texture and create a smooth surface.
  • Mix joint compound in a bucket as per the instructions on the package
  • Skim the surface with a thin layer of joint compound to smooth it out using a taping knife, then leave to dry overnight before you proceed
  • Lightly sand the surface smooth with the help of a 220-grit sanding block
  • Use a damp cloth to wipe the surface clean prior to painting.
can you wallpaper over artex?

Although they’re pretty much outdated now, artex happens to be a very popular surface coating option just a few decades ago. Several homeowners with artex in recent times would either want to have them removed or cover them up with stuffs such as a wallpaper. So if you’re wondering whether or not it’s possible to wallpaper over artex, then there you have it. It’s possible to wallpaper over artex, however it’s not advisable as wallpaper may eventually crack over time. On the other hand, the artex can also create ridges beneath the wallpaper which allows unpleasant protrusions in the wallpaper. Instead of applying wallpaper over artex, a more permanent solution would be to cover it with drywall or wet plaster or perhaps just have it removed completely.

 

There are two types of wallpaper, there’s the thin wallpaper application which comes with adhesive on one side as well as a pattern or colour on the other side. With this, all you need do is simply to peel and stick. Then the other type is the sturdier wallpaper that’s more thick and requires a special wallpaper paste. However, it’s important to note that if you choose to wallpaper over your artex, you won’t be able to make use of the thin type of wallpaper, rather you’ll have to incorporate the sturdier  option which makes use of wallpaper paste.

 

The wallpaper paste is the product you mix with water to produce a paste which you’ll have to apply to your walls before applying the applying the regular wallpaper - one without adhesive on one side. Appling wallpaper to an artex decoration may just give you the updated appearance you so much desire.

how to get artex off walls?

Artex is a water based decorative surface coating is typically incorporated on both walls and ceilings so as to apply a pattern. During the peak of its popularity in the 1970’s, it was considered the height of fashion when it comes to interior wall designs however its major drawback remains the fact that it usually contains asbestos especially if it was manufactured before the laws governing the use of asbestos was changed in the year 2000. And asbestos, as we know it, can be deadly when disturbed and its fibres are inhaled.

 

If you have artex installed in your purchased property and you do not know when the artex walls were done, or perhaps you just want to change the aesthetic design of your home into something more modern and to your personal taste, then you may want to remove the existing artex from your property for good. If this is your wish then you’ve come to the right place.

 

To remove artex from your walls you can choose to do so using the steaming method or through the use of an external product.

 

Using the steaming method, you should know that it’ll be more labour intensive and time consuming. You need a lot of patience moving your steamer slow and steady because if left on a spot for too long can damage the wall behind the coating. Once the artex has been dampened with the steamer, you can then scrape them off with a handheld scraper.

 

A faster solution would be to use an external product to remove your artex.  For example, you can use X-Tex which is a water-based coating remover. All you need to do is paint the substance over your artex wall and leave to dry for about 30 to 60 minutes before peeling away the artex.

Placholder Image

Other Top Projects in Coldstream

Customer Reviews

Overall rating:


Coldstream Artex Removal installers are rated 4.9 out of 5 based on 1 reviews of 8 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Artex Removal projects that have been connected with Artex Removal pros to help them. All Artex Removal contractors All Coldstream Artex Removal contractors

Are you a plasterer in Coldstream?

We can help you get more artex removal work with our qualified job leads and boost your business.

Join today