Air Conditioning in Downpatrick

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

When it comes to getting an air conditioning unit for your room, one of the greatest mistakes you can possibly make is purchasing and installing the wrong size in your personal space. In the event whereby you happen to go for an AC unit that’s too small, it won’t be powerful enough to cool your room as you would like. However, when you go ahead to select an oversized AC unit, your room would be cooled relatively quick but will leave the air in your room with excess humidity and consume more electricity as it’s going to cycle on and off which will ultimately cost you more money. As a result, it’s always a smart move to calculate the right air conditioning size for your room before making any financial commitment. In this post, we’re going to consider how you can determine the appropriate unit size for your space. Let’s take a look!

• Take the measurement of the room’s square footage using a tape measure. If the room isn’t rectangular or square in shape, simply divide the room in section comprising both squares and triangles which you can measure.
• Calculate the room’s square footage. For a square or rectangle, simply multiply the length by the width. However if your room is in another shape, you can determine the square footage of the triangular sections by multiplying 0.5 by length and width, and the sum each of the sections.
• Determine the cooling capacity required for the room in question which is measured in British Terminal Units (BTUs)/hour. For more information to determine the BTUs needed depending on your room size, simply visit the United States Department for Energy Star.

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.